Your cart is empty.
Your cart is empty.These self-adhesive reusable temperature labels provide a safe, accurate, easy-to-read means for monitoring temperatures. Indicating strips use liquid crystal technology to display the current temperature at an economical cost. The strip will turns a green color when ambient temperature is reached. Shelf life: 1 year after date of purchase. Each style covers a wide range of temperatures, for use in many different application non-toxic/non-hazardous temperature measuring alternative. Easy to read and unbreakable.
John Johnson
Reviewed in the United States on March 2, 2025
My hand indoors definitely isn’t -10°C. A 40°C error makes this literal trash.
Nick Neu
Reviewed in Canada on January 6, 2025
I use these on backpacking titanium pots to monitor water temp. By only heating to 70-75 degrees, save fuel while rehydrating backpacking meals.
Customer
Reviewed in Canada on September 7, 2024
Product works as advertised. The only issue is mounting this flat sticker on a round rifle barrel. I used twine to form it to the barrel for two sessions at the range. Now works great on my heavy barrel.
DrJ
Reviewed in the United States on September 24, 2024
I have these on every barrel. They work great.
AaronV46
Reviewed in the United States on August 4, 2024
You have to watch barrel temp and these work great. They stick well if you clean the barrel with an alcohol pad. You still need to replace them when they start to peel up. I stop to cool down at 55*C and pick back up at 40*C. That gives me 5-10 on-point shots. I start with target ammo to get to 40 then switch to match ammo and try to stay in that range. I am no expert but it works for me.
Satch
Reviewed in Canada on August 11, 2024
Temperatures are shown to be 20 degrees lower when checked against a Thermapen digital thermometer.For example: Tested at 205 degrees F - the strip indicated 176 F.
Dave K.
Reviewed in the United States on May 17, 2024
These were cheaper than putting a temp gauge on the hot water side of my furnace. The old one was VERY old, so temp reading was not great. These did the trick.
kikcaffine
Reviewed in the United States on December 17, 2024
Work great for my jetski to monitor head/pipe temperature.
Stephanie L Murri
Reviewed in the United States on December 14, 2024
Great tool for measuring surface temperature. Very sticky sticker, lasts a long time. Sticker doesn't hold up in the dishwasher, but i would have been surprised if it did.
Jack from Boston
Reviewed in the United States on January 7, 2023
Like others have said:It’s smallIf you are attaching it to a curved surface it’s hard to get it to stay attachedWhat I did: I was attaching it to a hot water pipe and I held in place for a couple of minutes get the adhesive to stick better. Otherwise it would have curled up at the edges. The heat of the pipe probably helped in my situation.It’s been in place now for a couple months, so the adhesive is holding up.I needed this temperature range to check the temperature on a hot water heater output. It is “small” but the print is certainly readable.And the temperature reading appears to be accurate.I only needed one, but having a few extras is probably helpful if you’re struggling with the adhesive issue.
DRG
Reviewed in Canada on August 2, 2022
I knocked off one star only because I've only had it on my rifle for one trip to the range. That may go up or down over time.I use these to monitor rifle barrel temperature as well and I am very happy with them and very happy with their size. I don't need anything larger than what these are to monitor where the red bars are. If you have a rifle with a barrel enclosed with a slotted forend then it might be hard to see depending on where it is placed but my rifle's barrel is fully exposed and the temp strip fits on perfectly after wiping the area down with alcohol before applying. For me, I would not want nor need anything larger than these. A quick glance tells me what I need to know.As for how accurate they actually are that I do not know but my current plan is to keep the bars to 45c / 113f max . This allows me to pace my shots and hopefully gives me a consistent point of reference for how hot it gets and not have to guessThe only unknown for me right now is how long they function. The package says one year. Hopefully, that's one year after first applied and that does not apply or all the rest that are still in the package
JetPowers
Reviewed in the United States on March 20, 2021
I got these to monitor temps on the brew head of a stainless steel - perhaps chromed, espresso maker. The metal gets hellishly hot being a pressure cooker, probably a bit moist occasionally too though never soaking. I applied after cleaning with alcohol and kept my paws off the adhesive. After a few weeks using just 2 strips I've noticed that the orange heat sensitive markers have faded to the point that I'm unsure the temps are reading. I've learned to adjust my awareness of the indicator brightness but I have lost confidence in it. On the second strip, one corner tends to lift up slightly. It has not gotten worse so perhaps the adhesive is not failing, but was not well applied at that spot. But all this said, the 2 little guys are chugging along.All in all I regret spending nearly $19 for ten of these and should've bought an IR thermometer. But it does the job so all is not lost.
Recommended Products
$22.10
$ 9 .99 $9.99