Your cart is empty.
Your cart is empty.Product Description
Why Choose Our DEDC Jack Pad ?
âMade from a blend of purpose-specific, highly durable rubber. Soft material to protect the frame rails from breaking.
âOur jack pads provide protection and cushion when lifting your car, both to the sensitive areas of the vehicle itself as well as the jack that's doing the heavy lifting.
âIt is a good helper for preventing your frame rail and pinch welds from bending, protecting your vehicle body from scratching when using a jack to lift up the vehicle.
Specification:
- Material: Rubber
- Color: Black
- Length: 2.48 in
- Height: 1.97 in
- Width: 1.73 in
- Package Includes:
- 2pcs/4pcs Jack Pad
Key Features:
Durable
Made of rubber, sturdy and soft, wear resistance, not easy to crack, has large load bearing, providing cushion and protection when lifting vehicles, sturdy enough to support your vehicles.
Portable
The weight of the jack pad is light so that you can place it at anywhere in the vehicle, protecting your vehicle better and timely from damaging.
Grooved Design
It adopts grooved design, has good effect on anti-slip, alligns with pinch welds, fitting the underside of your vehicle, preventing frame rail from getting pinched, bent, and broken.
Car Jack Lift Pad Adapter
- Material - Made of premium thick rubber; Securely fits into jack points, protects Pinch Weld Seams and Frame Rails from bending or breaking.
- Solid Pads - The material was strong enough to hold up the car with no issues. Keep it in your car for a rainy day, as some roadside mechanics or tire shops may not have the proper lifting tools for your car.
- Safe Raising & Lifting - This adapter is made to grip and fit into jack points on the car to provide secure grip and protection against your jack from slipping out and damaging the battery or chassis of the car.
Safely Raising Vehicle Frame Protector
- Compatibility - The jack pad adapter fits most jacks and vehicles and can work great with jack stand.
- Easy & Quick Installation - inserting the adapter pad into the vehicle jack point hole and positioning your jack directly beneath it, just make sure the jack is centered on the adapter pad.
- Product Works - This is a must have product for any professional or home mechanic. Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized. Protect your frame rails when jacking up your car with these jack pads.
Wide Application
Adaman7
Reviewed in the United States on January 2, 2025
I had two sets of Daytona jackstands. It fit perfect on one set, but the other it was loose on. The 3 ton daytona metalic jack stands fit perfect. However, the orange 3 ton dayona fits loose. I had to go back to HF to swap out for the metalic so it fit right.
Mark
Reviewed in the United States on August 28, 2024
DEDC Pinch Weld jack stand pads, 4 set. Worked great on a 2012 Kia Forte and fit the saddles on my Torin jack stands. The pads do deform when under pressure but that probable helps the pads grip the pinch weld and jack stands. The pads do reform when the car weight is removed. I paired these with a round pinch weld pad, by Planger, on my floor jack to lift. Very satisfied with this purchase. 08/28/24
Joe Altman
Reviewed in the United States on November 8, 2024
Not the best but not the worst they are ok and fit is fine.
James Hughey
Reviewed in the United States on January 19, 2024
Protects the pinch weld from damage. fit my 3 ton jack stands. may not fit all brands of stands. an excellent value at about $ 17.00
Ken Hufham
Reviewed in the United States on September 28, 2023
Exactly what i ordered to use with my quick jack..... works well ...... great fit on my Hellcat.
Sophie Wong
Reviewed in the United States on October 23, 2023
Definitely get these if you plan to support your car on the pinch weld. The pinch weld fits perfectly into the slot, providing a firm and secure support, with the added benefit of not damaging your jack stand.
Skot
Reviewed in Canada on November 30, 2022
Perfect fit for my 6 ton jack stands.
Victor
Reviewed in the United States on November 19, 2022
Doesn't really fit tight on my jack stands. I have 4 kinds- AC Delco, Northern Tool, Big Red, and NAPA, these are loosey-goosey on all of them. So when you are setting them in place, you kinda need to position them precariously, and they flop over to one side. Total PITA.
harpreet
Reviewed in Canada on December 9, 2020
They are good and they fit well on the jack stands that I have. My car has pinch welds around the area I use the jack stands on, hence they are a must have. I wish the groove was 2-3 mm deeper. No problems otherwise.
Chris
Reviewed in Canada on November 19, 2020
The opening that goes over the top jack bridge is too narrow. Could be 1/4 inch wider. Fit none of my jacks. This is not a universal item. False advertising. PLUS, it doesn't matter if you are a "Prime member" or not, you will have to pay $$ for return shipping to Amazon. Even though you thought you bought a universal fit.
Liam
Reviewed in Canada on April 22, 2020
As another reviewer has commented, these do not fit Amazonbasics 3-ton jack stands. Needed to widen the gap with a dremel.
Skouly
Reviewed in Canada on April 27, 2019
Nice upgrade to my Mack safety Jack stands. Perfect fit makes the stands less likely to crush the pinch welds while I do brake jobs on my home "fleet" of 4 cars which includes 2 beaters.
Mike C
Reviewed in the United States on August 30, 2018
Great fit and protects the frame pinch welds as advertised. They also don't damage the plastic trim pieces on your rocker. They do deform more than I would like under load. Wish they had a polyurethane version that could be made harder. Then may not deform so much but still protect the pinch welds. But, that being said, I would definitely recommend to DIY'ers for hanging the car on the stands. Way better than just ruining your pinch welds or putting jack stands in unsafe parts of the car.
Recommended Products