Your cart is empty.
Your cart is empty.Cut external and internal threads in wood to create clamps, jigs, toys, furniture, and fixtures with the Deadwood Crafted Tools Wood Dowel Threader Machinist Tap Die Set. Create round holes with the bolt chaser die and then create threads to attach dowels to the new hole with the wooden dowel threader box. Attached stopper on wood dowel threading kit box can enforce a halting point for your dowel threads or can be removed to thread entire length. Steel insert nut die and aluminum thread cutter work best with straight-grain hardwood, softwood, and round dowels. Use a drill bit to start a hole before threading. Thread box and tap allow easy chip clearance and a tight-fitting, strong wood thread. Thread box and tap kits available in 1/2x8TPI, 3/4x6TPI, 1x6TPI, 1-1/4x6TPI, 1-1/2x6TPI. [Cut Wood Threads]: Use the Deadwood Crafted Tools Plastic Dowel Jigs Woodworking Thread Tap Die Kit to cut external and internal threads for fasteners and holes [Choose Size]: Plastic wood threading tools available in 1/2-inch x 8TPI, 3/4-inch x 6TPI, 1-inch x 6TPI, 1 1/4-inch x 6TPI and 1 1/2-inch x 6TPI; Each includes a thread box, 7-inch (17.8cm) tap with handle, instructions [Premium Cutting]: Tapping tool set die and thread cutter screw hole ensures smooth, clean cuts for hard wood blocks and soft wood dowels for woodworking projects [How to Use]: Use oil lubricant (not included) to soften wood; Align dowel to wood threading kit threader hole, press down and turn to create external threads; Included threaded insert drill tap set tool cuts threaded holes in wood blocks to connect threaded large dowels [Fits Your Hands]: 10.5-inch (26.7cm) long plastic dowel threading tool box measures 2.25 x 2.4 inches (5.7 x 6.1cm) around with a removable stopper; 2.5 x 1-inch (6.4 x 2.5cm) handles easy to control while you rotate woodworking jigs box around dowel head California Residents Prop 65 warning:Products may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
Customer
Reviewed in the United States on March 12, 2025
The die is fine.The tap is not. They did nothing to clean up burrs after grinding the flutes and applied the coating over them, probably making them even harder to remove. It took me over an hour to remove them and re-sharpen it and still couldn’t remove them completely. For a tap this The die is fine.The tap is not. They did nothing to clean up burrs after grinding the flutes and applied the coating over them, probably making them even harder to remove. It took me over an hour to remove them and re-sharpen it and still couldn’t remove them completely. For a tap this size, it’s vital that it’s sharp, otherwise it shreds the wood and the power needed to make the cut is excessive, and dangerous if used in a drill.
jose
Reviewed in the United States on July 17, 2024
OK
W. Hitchner
Reviewed in the United States on March 22, 2022
The description says made of hardwood, but it came made from plastic. I am a traditional woodworker and I do not usually allow plastic in my shop. I was really looking forward to using this product, now I am embarrassed to own it.I have not used it yet, but hopefully it will be ok.
Matthew D. Hunstiger
Reviewed in the United States on September 14, 2021
I used this to make wooden screws/bolts for a wooden vise. It worked very well. The directions in the package are clear. I tested the dowel threader on poplar before doing the more expensive maple dowels. The cutting depth on the threader and tap made the wooden maple bolt and hickory nut fit very well. I pre-soaked my dowels for a day in boiled linseed oil. I bought a piece of pvc that would fit the dowels without needing a huge amount of oil surrounding them, and I closed off the bottom of the tube with a plastic bag and rubber bands. The handle on the tap can be hard on your hands since it is so thin, so I recommend making some covering handles with whatever dowel size you want by drilling a hole in the center of the dowel pieces and slipping it over thd metal handle. See photos for my setup, threaded dowel, and tapped nut.
ehansen
Reviewed in the United States on September 12, 2021
This tap and threading jig are well made. I have used it twice: once on oak and once on poplar. It cuts easily and cleanly.
Larry
Reviewed in the United States on June 13, 2021
Haven’t used it yet, but looks like it should do the job. Made in China, but what isn’t these days.
David R. West
Reviewed in the United States on January 20, 2020
This looks really nice and probably will work well I am soaking my dowel stick in linseed oil before making my wood vice screw.
Stephen Henderson
Reviewed in the United States on January 2, 2019
Had a project to add a wooden gas tank cover for my hot rod and wanted to find an easy and price effective way to add a nut & bolt look. Found tis product from a small business in the USA which I always check for. Now days you can't always get made in the USA but you can always buy in the USA. Thanks DTC
Recommended Products
$49.72
$ 25 .99 $25.99