Your cart is empty.
Your cart is empty.Product Description
With two internal limit switches for extension and retraction, there is no need to worry about over-operating the actuator. Please note that we do not recommend adjusting the limit switches to avoid damage to the actuator.
This linear actuator is equipped with a 1000N high-power motor for both pushing and pulling. In consideration of product life, we recommend that the long-term use load does not exceed 900N.
We give each linear actuator two brackets and a couple of screws as standard so you can mount the product where you need it. Installation is not complicated, and we believe you can finish the job quickly.
Level 5 Dustproof: Cannot completely prevent dust intrusion, but the amount of dust intrusion will not affect the normal operation of the product; Level 4 Waterproof: Prevent water intrusion from splashing in all directions.
This product can not only be used directly connected to the power supply but can also be used with a controller to achieve better results. The wiring diagram can be used as a reference, and we have given the controller with suitable performance and color for you to choose from!
This linear actuator operates with a sound that is in line with everyday life and will not bother you in any way. The sound level is only 50 dB under optimal conditions and does not become noisy as the working hours increase.
Customer
Reviewed in the United States on January 20, 2025
Very good product at a good price
JIM
Reviewed in the United States on September 24, 2024
I got this to move 3 zombies on a cam pivot. I have not finished my assembly yet but tested it & seems to have plenty of power to do what I need. Not sure why this says high speed. I have a high speed actuator that moves 12 " in about 2.5 seconds. This one takes about 22 seconds to move the 12 " . Zombies don't move too fast, so this will work perfect. It's also very quiet when running, that's good since I don't want to hear the actuator over the sound of Zombies moaning.
David Henry Torrey
Reviewed in the United States on September 20, 2024
I need a replacement it never ever worked. It says it has a 1 year warranty, however it passed the Amazon 30 day return. Send me one that really works and I'll fix the review.
Alejandro Andrade
Reviewed in Mexico on August 29, 2024
Excelente calidad y funcionamiento. Lo utilice para un mecanismo de alas.
Gregory T Reid
Reviewed in the United States on July 22, 2024
The media could not be loaded.
Joshua
Reviewed in Canada on May 28, 2024
This was a great addition for my tractor snowblower shoot. Worked well during the summer when I installed it and worked good during the first few winter storms we had. The only issue I had was that the further it got cold out, the worst it got because it would freeze and wouldn't move. I understand that I am using in a creative way, definitely should have bought something more heavy duty. But no complaints about buying it.
Anthony
Reviewed in the United States on December 30, 2024
They work well for a good price
John Brake
Reviewed in Canada on November 8, 2024
Very pleased with the item and pleased with the quick delivery
Nicole
Reviewed in the United States on November 6, 2024
Very pleased with this unit. It's very quiet and really powerful. The customer support was also great. I had some questions and they quickly responded with what I needed to know.
Customer
Reviewed in the United States on November 2, 2024
Exactly as described. Works great.
Ti guy do
Reviewed in Canada on November 11, 2024
Product as describe A-1 thank you
Greg Moore
Reviewed in Canada on June 21, 2023
I fully expected these to be terribly over rated for power and they are. Good for maybe 1/4 of their max rating, supposed to be roughly 1/2 of the stall rating. However they work well and I bought assuming they would have far less "push" than advertised.
K Fry
Reviewed in the United States on March 18, 2023
Generallly this works OK, and meets its specs. However, the machining of the mounting pin holes is shockingly bad. Ordinary good manufacturing practices produce products with better tolerances than a hobbyist machine shop can. This is much worse than hobbyist machining level.The pin hole (at the motor end) is not perpendicular to the rod, which can be checked by mounting the actuator in one position (eg. motor facing east), and then remounting it after rotating it 180 degrees. On mine, the difference in rod end position was about 1.5 inches, meaning that the hole was drilled a couple degrees from perpendicular. Some hand filing with a rat tail file trued mine up enough to prevent binding, but of course, the hole is no longer round or straight.Suggested improvements: stainless steel anchor brackets and pins to make it more suitable for use outdoors. And, of course, standard machining.
Recommended Products
$22.99
$ 10 .99 $10.99