Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #17 in Action Camera Accessories
- #93 in Camera Mounts & Clamps
Product Description
Darwin Ching
Reviewed in the United States on January 6, 2025
Put the GoPro clamp to the test and it worked like a charm. Kept my camera firmly attached to my helmet, even with the wind hitting it straight on. Easy to clamp on and take off. Great gadget!
ceempham
Reviewed in the United States on January 2, 2025
The clamp isn’t as strong as I’d prefer and wobbles more than I’d be comfortable with (100% and Leatt helmets) on anything more than blue MTB trails. If you do, definitely use the leash as you’ll probably lose it along with the GoPro at some point. Returning and going back to zip tieing a mount instead.
Aaron Walls
Reviewed in Mexico on June 12, 2024
The media could not be loaded.
Nikos Petrakos
Reviewed in the United States on May 20, 2024
Well, this is my first review of any product, honestly, I bought 3 different chin mounts for my helmet (Shoei GT Air 2) and none of them could hold well my camera (GoPro Hero 12).This is the best chin mount by far!!!With speeds over 200km didn't even move for long periods of time!And you can just fit it to any helmet!I will definitely buy more of these!2 things to have in mind:1. Most probably you will have to remove the chin wind protector underneath.2. I didn't test it offroad as I only ride on the road.
Cliente
Reviewed in Italy on May 20, 2024
Veramente utile, facile da mettere e togliere e video stabile.Unico problemino, ma di tutti supporti da mentoniera.... è non potere far scendere la maschera (se la si sua in off road).
Phyllis Jones
Reviewed in the United States on December 3, 2024
This product holds my Osmo Action 4 camera very securely to my Arai XD4 helmet but slides off my Shoei RF1400 and Shark Spartan helmets. On those helmets I need to place double-sided tape under the clamp teeth to hold it in place - a pain in the butt. It's like it was specifically designed for the XD4 helmet. I am very happy with the product but only with that one helmet. Perhaps my camera is too heavy. The Osmo Action 4 is very heavy.
Ryan Fauver
Reviewed in the United States on October 1, 2024
This works awesome! I wanted a helmet mouth that was easy to use and not permanent. I found this and gave it a try. It's perfect. It holds my GoPro in place with no issues at high freeway speeds, is easy to put on and off, doesn't mark up my helmet, and allows me to fully close my visor.Overall I'm super impressed.
Vince
Reviewed in Canada on October 1, 2024
Dango mount looks great and fits perfectly on my Arai XD5 helmet! Clip is super grippy and teeth fits flat in the interior of the helmet for a secure tight fit. Comes with a safety strap also.Customer support is excellent! There was a problem with shipping and the seller responded very quickly to fix the issue! Thank you!Would definately recommend as a primary option instead of using permanent adhesive mounts or strap mounts.
Aritza
Reviewed in Spain on April 3, 2024
Dependiendo la forma del casco, va a bailar un montón, en un Airoh Aviator, no se sujeta nada bien, y acaba por no valer para nada, ya que con el movimiento, la "pinza" se mueve, y el encuandre de la cámara queda torcido, bajo, etc... En otros cascos seguro que el funcionamiento es mas correcto.Es un poco incómodo lo que sale la pinza por la parte inferior, ya que al mover hacia abajo el casco (de cross) te pega en el pecho
Michal Marcinko
Reviewed in Germany on June 14, 2023
It is possible to place it quick on several parts of bike or clothes, so you can make really nice shots from different angles. Durability looks good, I thing it can survive for long time use also in off-road. I would recomand this cam bracket to any user, who like to change the cam position quick and several time in one ride.
Curtis
Reviewed in the United States on July 19, 2022
I have been looking and debating on a mount for my motorcycle helmet ever since getting my GoPro Hero 10. I was worried after reading all the reviews of the cheaper alternatives breaking and falling off, and I definitely didn’t want to use one of the sticky GoPro mounts on my Shoei race helmet. Plus I’ve never really trusted a sticky mount to hold an expensive camera and hold it without it falling off at high speeds.That’s where this mount comes in! It’s just what I was looking for. It is more expensive, but the quality is leaps and bounds above the competition. It is designed extremely well, and made here in the USA. It’s super easy to install, and even has a safety lanyard that attaches to your chin strap just in case it was to come off.I took it out for a test ride tonight. It went mostly well, but did have trouble staying in place on my Shoei helmet at around 70 mph.To be fair, my Shoei is a slick helmet with a very sharp front and hardly anywhere for the grip to hold onto. It’s a race helmet, and didn’t work as well as I had hoped. With that said, it fits amazing on my HJC Rpha 11 Pro helmet like it was designed specifically for that helmet. The HJC has vents in the front, and the grip of the mount conforms right around everything. It also grips perfectly on the inside piece as well. It’s on there so strong that you can literally hold the helmet by the mount. So I will start using my HJC when I motovlog and want to use the mount.Overall, it’s a great product that will fit most helmets, but not all helmets.Great craftsmanship, and a great product!
VonPhillips
Reviewed in the United States on October 31, 2021
Bought this so I could capture footage on a week-long moto adventure with some friends. What I liked most about this mount was that it does not permanently attach to your helmet, which so many others do. I've used the stick-on mounts from GoPro on the side of my helmet but the field of view always captures part of the helmet in the image. With this mount, I could simply attach it to the front of my helmet and had a clear field of view for the camera and could remove it simply when I needed to.Another nice feature of this mount design was that I could clamp it on other area of my bike, for example on the handlebars to get a different perspective (shooting up at the rider.) This makes it more versatile than other dedicated helmet mounts.The materials, design and construction of this mount are top-notch and it feels like it will endure a lot of punishment and use. It is not some flimsy, cheap feeling product that is going to snap in-half. Sure it is expensive, but if you want a mount that works right and will last- this is it!
David
Reviewed in the United States on May 19, 2019
I have used this on several rides now to New Mexico and Arkansas on my KTM 1090R mounted to a Bell MX9 helmet. I have a Campark camera which has the same mounts as a gopro (used the waterproof case), and with this mount I do not notice the camera is even there, and the Dango stays completely put with no sign of coming loose even after some rough riding.You can adjust the angle up and down to compensate for your view, though this will depend on your camera mount arm length. Be aware that the jaws of the Dango can damage the inside of your helmet, so you may want to put some thin rubber or tape to protect it.Not much else to say, I love the first person view, and I feel that this is the most secure mount you can place on a helmet. I have little confidence in the tape side mounts out there, and unlike a lot of products nowadays this is simple and just works. Oh, I have used this on a Shoei XR1200 road helmet, so works on road and MX helmets alike.Recommended, and thanks to Dango for making this available.
Recommended Products
$39.99
$ 20 .99 $20.99