Your cart is empty.
Your cart is empty.Product Description
Removable Screw
The screw can be disassembled at any time after use,which is convenient for carrying and storage, and is not easy to be damaged.
Easy to Use
Crimp the clamp, then turn the screw to push the crimp to lock in place. Grease the screw to make it work more smoothly.
Premium Quality
Made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy , phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life.
ReluxGo has been focusing on providing more high-quality, more efficient and economical car tools for more than fifteen years.
jfrank1961
Reviewed in the United States on February 27, 2025
This tool worked exactly as expected. I added some anti-seize to the threads to ensure smooth operation for future use.
WM
Reviewed in the United States on February 26, 2025
Don’t buy the plyers, buy this. Much easier to use and frees up both hands.
Ern D
Reviewed in the United States on January 4, 2025
Worked perfectly for original Camry boot clamps
Wes
Reviewed in the United States on January 17, 2025
This tool is not bulky and simple to use.
Michael L. Smith
Reviewed in the United States on January 12, 2025
More than paid for itself the first time. Sneak it right in and tighten the clamp. It will go places the pliers only wash they could. I wish I had had this years ago.
Rickster
Reviewed in Canada on January 12, 2025
Im satisfied with this tool and used it a few times already. It did a great job with closing the clip and im certain iwill have many more uses in the future. Your money will be put to gooduse buying this tool
Tommy Brandt
Reviewed in the United States on September 6, 2024
its a great tool but immediately switch the bolt that comes with it to half the length for tight spaces. i use it for the inner tie rod recall on the nissan sentra. it is absolutely great!
stephen m corbett
Reviewed in the United States on August 23, 2024
Tool is great but the bolt that drives the jaws together is very soft. I replaced it with a socket head cap screw from the local hardware store and it worked great. Much better than the pliers. Hold the tool with a crescent wrench to keep it from twisting.
Cesar a.
Reviewed in Mexico on July 21, 2024
Está hecho de un muy buen material, cumple su función. Por tanto facilita mucho el trabajo, más que las pinzas que son para lo mismo.
Muy eficiente herramienta, me funcionó muy bien
Reviewed in Mexico on May 4, 2024
Reparé unas polveras en un auto Corolla y funciona perfecto.
Tracy I.
Reviewed in Canada on December 1, 2024
Needed this for my CV Boot replacement on my Toyota. Worked as described and looks factory, for a reasonable price.
Juan Sanchez
Reviewed in the United States on November 14, 2024
Does the job ok, I’m sure Toyota’s isn’t as loose tho
M F
Reviewed in Canada on April 10, 2024
2011 Toyota Sienna CV boots. I purchased the OEM CV boot kit with clamps.Pros: This tool tightened the clamps easily and correctly. I was surprised how little force was needed with a 13mm box end wrench on the tool bolt. The clamp crimp looks just like it was factory installed. I tightened the RH inner boot after I installed the axle onto the cross shaft so I wouldn’t have to deal with that nasty cross shaft bearing. There isn’t a lot of room but the tool fit in the space no problem. Tool is made of good quality material. No sign of fatigue or wear after eight clamps, and should last indefinitely for a DYIer.Cons: The two set screws that hold the jaws are loose and could be a problem with jaw alignment if they get too loose. I used thread locking fluid on both screws. On the jaw opposite the bolt, I tightened it completely against the stopper, because this jaw doesn’t need to move when clamping. On the other jaw I set the screw so the jaw would slide with very little play. Now both jaws stay aligned. The bolt threads and jaw sliding surfaces were dry, so I lubricated all moving parts. The bolt looks like any off-the-shelf bolt with an unfinished and rough end. I could see it digging into the jaw as the bolt was rotating which caused friction and damage to the jaw. I sanded down the end of the bolt so it is smooth, square, and flat and added some lube. Now the bolt rotates smoothly.Conclusion: The mods didn’t take long and are easy to perform. If the manufacturer had done these mods, it would have received five stars. After these small mods, the tool performed very well and I do recommend to any DYIer.
Recommended Products