Your cart is empty.
Your cart is empty.Product Description
High-quality Materials and Upgraded Functions
High Durable Material
The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃ for a long time without deformation.
Withstand up to 2000 times use, no need of frequent replacement.
Stronger Adhesion
Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion, no need to use texture paper and solid glue.
Great Flatness
The glass platform offers 0.15mm of flatness due to the combination of glass and composite, ensuring giving smoother build surface. Its excellent flatness is effective to avoid leveling failure.
Easy To Use and Maintain
Simple Installation
Just need four middle-size clips to fix the Glass Bed on your 3D printer's Heated-Bed and then level the bed before printing. It is also convenient to pick off after printing done.
Easy Remove
After the printing is done, wait for the hotbed to cool down to a suitable time for taking off the mold, then try to hand remove the printing, no need for other tools such as a shovel.
Easy to clean
Please clean the dust with a soft cloth. Wipe the stains with over 95% strength alcohol gently.
Do NOT wash or clean with any water, strong chemical reagents, or strong detergents.
C M
Reviewed in the United States on February 1, 2025
Amazing adhesion absolutely needs to be placed in the freezer to remove The object. Bought 2
Kawasaki Cruisader
Reviewed in the United States on January 6, 2025
Works fantastic on my 10s pro v2.
LK
Reviewed in the United States on January 23, 2025
Came in perfect condition and as described.
Monsterzorp
Reviewed in Canada on January 17, 2025
So much better than my previous destroyed stock Ender 3 V2 bed. However, within a day and a handful of prints a print stuck so well it pulled the coating off it.
Mark Aukett
Reviewed in the United Kingdom on September 15, 2024
Decent enough quality for a glass bed, but I've given up and swapped to a magnetic plate as adhesion is either "none" or "pass me a jack-hammer this won't come off" with these.Honestly go buy a 3rd mag plate kit, they're way better.
alex
Reviewed in the United States on August 5, 2024
This is a silicon carbide textured print surface with excellent flatness and nicely ground edges. Looks like the manufacturer hedged a little to avert poor adhesion criticism and painted the SiC surface with an additional ABS goo layer. Which becomes obvious when you try and deep clean it with acetone. I don't mind that because I normally use the opposite, smooth glass surface. But I wish they would add that detail to the product description just so folks don't freak out when trying to deep clean the surface. It's not a con, just a hidden pro :)
Jason Brett
Reviewed in Canada on June 28, 2024
Buy two of them so that you can start your second print while you stick the first one in the freezer for 20 minutes to remove your print.I've been 3D printing for years, and print mostly PLA on three Ender 5's along with other printers including Ultimakers. I've never had anything stick as well as the surface on this glass. Whoa! I destroyed my first print trying to remove it. Eventually I decided to place the bed and print into the small fridge/freezer in my back room. After about ten or fifteen minutes the print popped right off, no prying or scraping required.If you don't have some way of chilling the bed, I might avoid them... but if you do, then they work great. I am following my own advice and buying an extra one!
Monkey Boy
Reviewed in the United States on February 11, 2024
I'm a big fan of glass print beds for 3D printing because they are manufactured more flat (i.e. to closer tolerances) and stay more flat over their useful lifetime than do other print bed materials . When I recently purchased a reality K1 Max, it came with a magnetic flexible PEI steel sheet which seemed to be less than flat out of the factory and got less flat with usage. This resulted in high variances in my bed leveling mesh inconsistent first layer adhesion.This glass bed fits perfectly on a K1 Max with only two minor modifications. Specifically, you'll have to a) swap out the locator pins at the back of the build surface base plate for a couple of printed guide tabs and b) use low profile clips to securely attach it.If you prefer a glass bed, whether you're purchasing this for one of the older Creality machines that it was originally designed for or upgrading a K1 Max as I did, this is a quality product, perfectly suited to the task.
Roger
Reviewed in the United States on December 16, 2024
My original plate was getting old and the prints weren’t sticking. With this new plate everything sticks well and is easy to clean.
Ra
Reviewed in the United States on September 15, 2023
Grabbed this replacement glass for my Neo Max. Fits perfectly, adheres as good as the original Ender glass. The only issue I have noticed is a slight warp in the middle of the glass bed. No adjustment at that point, so not much I can do about it. Auto level shows the variation, and appears to be working around it. So I played it smart and grabbed a PEI sheet as well. I like (and prefer) the glass bed for 3d printing on my Neo Max. Hopefully this small issue stays a small issue and I can just keep on printing on glass...
Alexander
Reviewed in the United States on November 26, 2023
So this was an excellent idea.I picked this up because of all the rave about glass beds and I wanted to use one on my Neptune 4 Pro. However, I noticed the magnet sensor only reacts with a PEI sheet, so I used clamps to hold this bed to the magnet sheet and put the PEI on top of it. This glass bed is WAY flatter than the normal bed I had before. Leveling is pretty much as easy as letting the auto level run and I am off to printing. The bed heater does a good job at heating everything up and the glass is fantastic at evenly distributing the heat.Neptune 4 Pro or not, this is a really good purchase if you're looking to make printing easier for you.
Recommended Products