Your cart is empty.
Your cart is empty.Product Description
Javier
Reviewed in Mexico on February 10, 2024
Buen producto solo cuidar las orillas tienen mucho filó de un lado y si no se tiene cuidado cortan las manos, en mi caso pulí la orilla para eliminar ese riesgo después de haberme lastimado
Asutashi_Aki
Reviewed in the United Kingdom on October 25, 2024
Haven't had a problem at all, easy to clean and use
Tamara Parris
Reviewed in Canada on September 11, 2023
The media could not be loaded.
Alfredo Salvador D
Reviewed in Mexico on July 17, 2023
muy útil para despegar fácil las piezas impresas en resina
JoshWs Reivews
Reviewed in the United States on November 23, 2023
I've been using the Sovol 3D Upgraded Platform, specifically the Resin Magnetic Flexible Steel Plate Flex Bed designed for Anycubic printers, and I'm extremely impressed. I'm still on the first plate of the two-pack, and it's going strong, showing no signs of wear and tear even after extensive use.Remarkable Durability:The durability of this flex bed is outstanding. I've been using the first plate for quite some time now, and it still performs as well as it did on day one. The fact that I haven't even needed to switch to the second plate in the pack yet speaks volumes about the longevity and quality of this product.Magnetic Flexibility:The magnetic flexibility feature is a game-changer. It makes removing finished prints from the bed an absolute breeze. Gone are the days of prying and scraping to get my prints off the bed. Now, it's just a simple flex and lift, which is not only time-saving but also reduces the risk of damaging delicate prints.Enhanced Adhesion and Print Quality:The adhesion of prints to the plate is just right. It holds the print firmly during the printing process, ensuring stability and precision, which in turn enhances the overall print quality. There's a notable improvement in the finer details of my prints, and I attribute much of this to the consistent performance of the Sovol flex bed.A Small Tip for Optimization:The only piece of advice I would offer to new users is to consider lightly sanding the plate before the first use. This can enhance the adhesion slightly, ensuring that prints stick well during the initial layers. It's a minor step, but it can make a noticeable difference in the print's outcome.Conclusion:In summary, the Sovol 3D Upgraded Platform with the Resin Magnetic Flexible Steel Plate Flex Bed is a must-have for any Anycubic resin printer user. Its durability, ease of use, and the quality it brings to prints make it a wise investment. Plus, with two in a pack, you're set for a considerable time. I highly recommend this product to anyone looking to enhance their resin printing experience.
John
Reviewed in the United States on May 27, 2022
I installed the Sovol 3D flex plate on my Elegoo Mars 3. It fit perfectly. I followed all of the installation directions and clamped the magnetic plate to the build plate for over 72 hours.The good news: It worked great...The bad news: That is until the glue failed and magnetic plate fell off the build plate after about 4 printsHowever, I re-glued the magnetic plate back on with JB Weld (clear) and it seems to be holding fine after at least ten prints. It only took a couple hours to cure too.Other comments:-The small set screw in the build plate can be removed to allow you to remove the mount so that you can clamp the build plate in the center-The magnetic force is more than sufficient to hold the flexible steel plate to the magnetic plate-I had some trouble with some prints not sticking to the build plate so I roughed up one side with sand paper. I use this side for prints that have a lot of surface area in contact with the fep sheet and the smooth side for everything else. I am actually surprised how well prints adhere to the smooth side.
Jesse A Barrett
Reviewed in the United States on September 10, 2021
I love my magnetic PEI build plates on my FDM printers, so I ordered magnetic steel build plates for my 'OG' Mars.Arrived lightly packaged, but included 2 full setups, not just two build plates. Packaging was soft, but since it isn't really intended to survive for long, i had no issue with that.Instillation was a bit annoying as it involved a) tearing down my drive screw a bit, and b) being a generic solution, required lots of trimming of the magnet.Initial use was exactly as expected, but it requires a through wipe of the magnet / existing build plate after each use, or the resin film allows the magnetic plate to move.Being able to pull, wipe, and start the next print before even messing with de-plating is handy, but less so than I hoped.Issues occurred as soon as i switched from clear resins to a more basic grey. Build plate adhesion immediately became a problem.I fine tuned the initial exposure settings and got my performance up to 'meh', but still had trouble with things not sticking like they should.Due to frustration factors I basically stopped printing resin for a while. I returned to it and the peeling problem was still there.Until Monday, when i woke up to the revelation that D@mn, those spring steel build plates sure are SMOOTH.A few seconds with some emery paper and I'm thinking about dialing BACK my initial exposure settings 'cause now nothing wants to come loose. That however is easier to work with, especially to the gentle sound of the next print already bobbing behind you.8 out of 10
Richard Dorsey
Reviewed in Canada on May 20, 2021
Great Sovol brand, flexible build plates, for my Anycubic Photon S! Now I can easily remove prints, from my build plate. Before I got this, I was forever fighting with my stock build plate. Some prints, were near impossible to remove. Now, I just remove the plate, give the plate a slight twist, and my print just pops off! No more throwing my build surface, out of alignment. Purchased, from a great Amazon seller! Will definitely, be buying from them again! Thanks AGILE STORE! =)
Recommended Products