Overview:>Product arrived in a small box with enclosure material (tent) and snap-together poles.>Enclosure is six-sided (including bottom) with side-panel (velcro flap and rear vent.>Assembly of the frame was fast and easy (three types of pole sizes)>Material was decent quality (but very difficult to wrap around the frame).Features I appreciated:>Side-flap (with velcro) allows me to place my Sovol dryer beside it to feed filament.>Rear vent (with pull-closure) allows for power cord to feed through>Zippered flap has large window (front) to view printing status>Flap can unzip for front/top access and permit additional ventingPotential Future Modifications:>Add 12" or 24" LED light bar to illuminate the interior to monitor printing progress>Add grommet hole in the side of enclosure to support feeding filament from external dryerAssembly Steps:>Build the cube frame using the instructions (takes 5 mins or less)>Fit the fabric over the cube frame (watch for orientation with vent to the rear)Caution:Due to tightness of enclosure fabric, you may need to pull-stretch the fabric over a period of time.I had to allow the fabric to relax to the applied tension before trying to stretch it more.Although this process took a couple hours, it resulted in a very snug and sturdy fit.While I was a bit frustrated during this process, I was very happy with the end-result. Worth it.

This thing is massive! Definitely measure where you intend to put it first and look at the dimensions 😂 currently on the floor because it didn't fit on the table we were going to put it lol but it's great quality, perfect size for the printer, and the fabric fits nice and snug (it helps having a second person while putting it on).

The Creality Enderplus 3D Printer Enclosure is a game-changer for enthusiasts seeking to optimize their 3D printing setup. With its fireproof and dustproof design, coupled with temperature control capabilities, this enclosure addresses common challenges faced by 3D printing enthusiasts, such as curling issues, while enhancing the overall printing experience.One of the most significant benefits of the Creality Enderplus Enclosure is its ability to maintain a consistent temperature environment during the printing process. By enclosing the 3D printer within a controlled space, this enclosure minimizes temperature fluctuations that can lead to warping and curling of printed parts. As a result, users can achieve higher-quality prints with smoother surfaces and improved dimensional accuracy.The fireproof and dustproof properties of the enclosure provide an added layer of safety and protection for both the printer and the surrounding environment. With its durable construction and robust materials, the enclosure effectively shields the printer from potential hazards, ensuring peace of mind during extended printing sessions.Moreover, the Creality Enderplus Enclosure offers ample space for accommodating various printer models, including the popular Creality Ender series. Its spacious interior allows for unrestricted movement of the printer's build platform and extruder assembly, ensuring optimal printing performance without compromising accessibility or convenience.Installation of the enclosure is straightforward, thanks to its user-friendly design and intuitive assembly instructions. With minimal effort, users can quickly set up the enclosure and begin enjoying its benefits, regardless of their level of technical expertise.In addition to its functional advantages, the Creality Enderplus Enclosure features a sleek and modern design that complements any workspace or home studio environment. Its transparent panels provide a clear view of the printing process, allowing users to monitor progress and make adjustments as needed without disrupting the enclosure's temperature stability.While the Creality Enderplus Enclosure excels in addressing curling issues and enhancing print quality, it's important to note that environmental factors and filament characteristics can still impact printing results. However, with proper calibration and adjustment, users can leverage the enclosure's benefits to achieve consistently impressive prints with minimal effort.In summary, the Creality Enderplus 3D Printer Enclosure is a must-have accessory for 3D printing enthusiasts seeking to elevate their printing experience. With its fireproof and dustproof construction, temperature control capabilities, and user-friendly design, this enclosure offers a reliable solution for addressing common printing challenges while unlocking new possibilities for creativity and innovation.

Let me share my thoughts on the Ender 3 V2 Enclosure – it's been a game-changer for my 3D printing setup!First off, this enclosure is a must-have for anyone serious about 3D printing. It's fireproof and dustproof, providing a safe and clean environment for my printer to work its magic. Plus, the constant temperature inside helps ensure consistent printing results, reducing warping and improving overall print quality.Installation was a breeze – it's designed to fit perfectly with the Ender 3 V2, so there's no need for complicated modifications. The clear acrylic panels allow me to monitor the printing process easily, while the sturdy frame keeps everything secure and stable.One thing I love about this enclosure is how it helps minimize noise and odor. The enclosed space dampens the sound of the printer, making it much quieter and more pleasant to work around. Plus, it helps contain any lingering smells from melting filament, keeping my workspace smelling fresh.Overall, the Ender 3 V2 Enclosure has exceeded my expectations. It's a well-built, reliable solution for enhancing the 3D printing experience. If you're looking to take your 3D printing setup to the next level, I highly recommend investing in this enclosure.

I got myself the Ender 3 V2 Enclosure from Creality, aiming to keep my 3D printing environment more controlled, and I must say, it's been a game-changer. The enclosure does an excellent job at maintaining a constant temperature, which has significantly improved the quality of my prints. No more warping or issues caused by drafts or temperature changes!Not only does it keep the heat in, but it also keeps the dust out, which is a big plus for me. My printer is in a space that tends to get dusty, and keeping the sensitive parts clean has always been a bit of a chore. This enclosure has made that worry a thing of the past.Another feature I appreciate is the fireproof material. It adds an extra layer of safety to my printing process, giving me peace of mind, especially during those long prints that run overnight.Setting it up was a breeze, too. It fits my Ender 3 V2 like a glove, and the access door makes it easy to interact with the printer when needed without too much fuss.In short, the Ender 3 V2 Enclosure has not only improved my printing results but also made the whole process safer and cleaner. It's a solid investment for any 3D printing enthusiast looking to upgrade their setup.

I purchased this Ender enclosure for my Prusa i3MK3S+ printer and it's fantastic! The printer fits with ample space all around, including the spool of filament, and maintains a warm temperature inside the enclosure which is excellent for printing. It also keeps the heat IN, so the room temperature is not increased! It also muffles the sound - it does NOT eliminate the sound, but muffles it. The clear plastic window in front it nice to check on the status of the print, and the zippers allow you to not only open the front fully, but also the top! The zippers work well (keep them lubricated). This enclosure does not have the advanced features of that offered by Prusa - there is no lighting, air filtration system nor fire suppression system, but then again, this enclosure is $50 compared to $350. I plan on adding LED lights on the inside & estimate it will cost me around $15 to do so. I highly recommend this enclosure for not only Prusa i3 printers but any other similarly-sized printers.UPDATE: I added a string of 12V COB LEDs along the frame all around. I simply used the light string's adhesive backing to affix them to the frame of the enclosure, and fed the power cord out the back. The LEDs + power supply cost me less than $12 total. I originally used 5V color LEDs but decided to replace them with the 12V COB LEDs, and boy what a difference! With the reflective inside surface, there is plenty of light to clearly see the print.Update: After 3+ months, I am still completely satisfied with this enclosure for my PRUSA MK3S+ printer. One of the best (if not the best) peripherals I purchased for my 3D printing! I'm surprised that the company doesn't market different models with different printer names on the front (instead of Ender) - would sell even more I suspect. If you have a Prusa 3D printer, this is a should-have!!!9 Month Update: Amazon is now displaying a box saying that this is a frequently returned item. Not sure which model(s) since there are half a dozen models listed, but I selected the Ender 1 model and have had absolutely no issues whatsoever. The zipper works well and easy, and being able to open both front and top panels makes it easier for some jobs. The only thing I can think of is folks don't read & understand the description & wind up ordering a 10X more expensive rigid enclosure OR they don't select a large enough unit. I hope Amazon's box doesn't scare folks off - if you are NOT looking for a rigid enclosure, and would be satisfied with a "soft" enclosure that is fire-proof, dampens sounds quite a bit (but not totally), and you don't want to lay out $250 or more, this is a good buy. But make sure your printer will fit in the size you choose before ordering!!!

I live in a cold-weather state and noticed that the edges of my larger prints (especially 90 degree angles) were pulling up from the print bed, ruining larger prints midway through. After doing some research, I suspected the issue was cold drafts from a nearby window, as all the failures occurred on the side of my printer closest to the window. I decided I need an enclosure to help with this problem and, hopefully, to allow me to run prints if I moved the printer to my cold basement.The large version of this enclosure is perfect for the larger Ender 3 Max Neo printers. It is high quality top to bottom - with a firm, easily assembled frame, high quality material and excellent zippers that aren't going to start snagging after a few months of use. The enclosure is LARGE, so be sure to check the measurements of the space you want to use it. Mine hangs off my desk somewhat, but the body of the printer remains firmly seated on the desk. I've run about 15 prints since I got the enclosure and happy to say it totally took care of the problem. All my prints have locked firmly on the plate and remained there during up to a 20 hour print. The enclosure is plenty large enough to not impede travel of the printer plates, and to accommodate the filament reel off the side (though I had to angle it slightly - it still feeds fine).This item is pretty expensive for what it is, but it works as advertised and seems very sturdy. Very recommended if you want a solution for a problem like mine.

Not the most expensive unit but was very easy to set up and use immediately. I had a great time playing around with this machine and would consider buying more