Your cart is empty.
Your cart is empty.Product Description
5Aplusreprap 3D Printer Accessories Ender 3 All Metal Hotend Kit, Upgraded CR10 Hotend Compatible for Creality CR-10 Ender 3 V2 Ender 3 , etc.
Package Includes:
- 1 x Ender 3 Hotend, CR10 J-head Hotend kit
- 1 M3 stud-in NTC 100K thermistor and 24v 40w heater wire,
- 5 x 0.4mm brass nozzle,
- 3 x MK8 Nozzle Silicone Case,
- 2 x aluminum CR10 heated block,
- 1 x wrench tool,
- 1 x 1m Teflon Tube,
Compatible with 3D Printers:
- Creality CR-10, CR-10-S5, CR-10-S4, CR-10S, CR-10 MINI, CR-20, CR-20 Pro,
- Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, XY X5S, Tevo Tornado, Alfawise U20, Lotmaxx SC-10, etc.
5Aplusreprap Ender 3 V2 Hotend 24V 40W （ M3 stud-in NTC thermistor and 24v 40w heater wire ）
Assembled 3D Printer Hotend Kit
Color: as pictures shown
Throat Pipe Length: 27 mm
Scope of Application: 3D printer
Material: Aluminum
3D Printer Cartridge Heater 24V 40W
Advantage： 1. High electrical conductivity and low loss.
2. Uniform heating.
3. Fast temperature rise and good electrical conductivity.
CR10 Heating Block
1. These heating block are cnc machines processing, high precision and quality, stable performance.
2. Material: Aluminium alloy
3. Dimension: 20mm*20mm*10mm (+/-0.5mm)
Upgrade Ender 3 Pro Hotend
Ender 3 Thermistor Replacement :
- M3 stud-in HT-ntc100k NTC 100K thermistor and heater wire 24v 40w ;
DJ Bragi
Reviewed in the United States on January 2, 2025
Love the quick connect wires for both heating element and thermostat makes future replacement easier.
MH
Reviewed in Germany on September 3, 2024
Wurde in einen Tronxy X5SA Pro eingebaut, passt perfekt in die vorhandenen Bohrungen.
Heidi Saylor
Reviewed in the United States on September 12, 2024
I wasn't sure if the hot end would fit, but it fit great on the sunlu s9 plus printer. Fairly easy install, the wires might be a little short to get the whole z axis, but I think it will be alright.
Toddd L. Tomlinson
Reviewed in the United States on July 22, 2024
I was getting intermittent temperature runaway errors on my Ender 3 V2 and decided to replace my hot end with this version. I liked this one as the thermistor screws into the base and not just glued into the base like the other version I purchased. It took me 15 minutes or so to install the replacement and I was back up and running. Two 4 hour prints in and zero thermal run aways and my prints actually look better.
Crisco
Reviewed in the United States on June 8, 2024
I was having nothing but trouble with my Ender 3 Pro. After weeks of tinkering, I decided it must be my hot end, so I replaced it with this, and my prints returned to their former glory. Here's the kicker - the garbage hot end I replaced was my relatively new $60.00 Spider 3.0.
Martin
Reviewed in Germany on June 5, 2024
Eigentlich würde ich ja gerne 4-5 Sterne geben da der Hotend ansich gut ist aber was man am Bild nicht genau erkennt auf den ersten Blick ist dasss eines der beiden Kabel am Ende keinen Stecker hatt... die Kabel sind blank. Dass heißt ich durfte erstmal auf die Suche nach passenden Klemmen und Stecker gehen (kaufen) und die Kabel umbauen. Absolut unnötig und frustrierend wenn man sich auf sein Hotend gefreut hatt. Vorallem weil die passenden Stecker bei den anderen Kabel ja vorhanden sind. Verstehe nicht warum man dass zweite blank lässt.
Live I Own
Reviewed in Germany on May 26, 2024
Da mein originales Hotend dauernd probleme mit dem aufheizen hatte habe ich es durch dieses getauscht und bin davon begeistert, ich bilde mir ein das hotend heizt sogar um einiges schneller ein als mein altes und der größte Vorteil ist das das kabel aus 2 teilen besteht somit könnte man das kabel im falle eines Kabelbruchs leichter tauschen ohne gleich wieder den halben Drucker zerlegen zu müssen was mir persönlich wichtig war 😄
Katrin Bodenmueller
Reviewed in Germany on May 19, 2024
Passt nur mit kleinen Anpassungen an den Creality 10 pro.Aber für den Preis. Ist bei mir jetzt im Einsatz
Zackary Schull
Reviewed in the United States on May 1, 2024
I bought the upgraded heating element to replace the original ender head that I broke. The thermoster, as it screws in, brushes up against the enclosure for the hotend. I had to rotate the hotend around to make clearance for the thermoster. The power wires for the new hotend didn't have the connectors installed, so I had to cannibalize the power connectors from my broken hotend to get them installed. This took some doing, but ai was able to get the new cables crimped into the old power connectors. The temperature doesn't hold as steady as the original hotend, though it stays within 10°C of my chosen temperature, so I haven't seen any issues. Aside from the somewhat frustrating install, the hotend has been working well.
Kevin Morris
Reviewed in the United States on December 1, 2024
Got a Creality Ender 3 v2 for free that was broken and giving all kinds of errors and found the issue and replaced the hot end with this one based on the reviews and months later its still working great!
Clayton Lincoln
Reviewed in the United States on November 17, 2024
When everything has a solid connection, it works great! The quick disconnects come loose very easily making your Ender throw thermal errors. I ended up just removing them and soldering the wires. Since then, it’s been solid!
I.F.
Reviewed in Germany on October 30, 2024
Passgenau, einfach und günstig.
tyler
Reviewed in the United States on October 15, 2024
I bought this about 3 months ago and didn’t need it until my old one broke (always have an extra to not have to wait for a replacement) and right a ay it gives this error. Come to find out it’s the thermister causing this issue. Not too happy.
Recommended Products