Your cart is empty.
Your cart is empty.Product Description
Drop In Auto Leveling Upgrade
CR-Touch is Creality's latest self-developed auto leveling upgrade kit. Sharing the same firmware as the popular BL-Touch Kit, the CR-Touch is easy to install and configure.
Precise Auto Bed Leveling
With a tolerance ≤ 0.04, the CR-Touch delivers precise and consistent leveling results to make 3D Printing easier for you.
Improved Design
CR-Touch chooses a metal push-pin over a plastic one for its better wear-resistance and heat-resistance, ensuring a longer lifespan. In addition, with the hidden spring design, losing spring will no longer be an issue.
Easy to install and use
Download CR touch program from Creality official website and copy it to TF/SD card. Insert it directly into the card slot of the 3D printer,the program can be updated after power on.
Wide surface compatibility
The CR Touch kit is compatible with PEI, stickers, glass, metal and more printing platform materials. Compatible with any bed surface, regardless of surface type or material.
Wide printer compatibility
The CR Touch kit is compatible with Creality Ender-3 V2, Ender-3, Ender-3 Pro, Ender-3S, Ender-3 MAX, Ender-5, Ender-5 Pro and CR-10.
Smooth Inner-Wall
One-time forming technology, make sure the interior of nozzle is smooth without burrs.
Uniform Tip
Made with centering CNC precision automatic lathe, make sure the input and output holes are concentric, to get a uniform tip.
Smooth Input
Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
Juan Carlos González López
Reviewed in Mexico on January 6, 2025
Funciona de maravilla, solo que le doy 4 estrellas porque tuve que rediseñar el soporte de instalación pues no se ajustaba de forma correcta a la altura del nozzle.
P. Cardelli
Reviewed in the United States on March 17, 2024
Update: Contacted Creality Support, submitted information about what happened with a video of the issue, they are sending a replacement. My other one is working fine. So I'm sure it was just the luck of the draw. It is a little different leveling, and I still recommend a manual level, and switching out the springs for spacers.I have two of these on two different printers, one failed functioning at probably 25 days, but I did not identify it until I replaced the motherboard about 5 days later thinking there was a problem with that. A little bummed. It is a process to refresh the firmware on your printer. I think I had a faulty original 4.2.2 motherboard too which may have lead to the failure. Either way, not a bad price, but as for reducing leveling workload I think there is not a time savings just a different way of leveling, and I still don't trust 100%, as I like to level manually once in a while and use spacers instead of springs for a more stiff and level bed that is less likely to shift.
F Volker
Reviewed in the United States on November 15, 2024
This is a time saver to say the least. I installed this along with silicone bed mounts and have not touched the leveling wheels for 5 months. Occasionally, I do an auto level, store settings, and print away. Truly a great product.
Chomdh
Reviewed in the United States on September 9, 2023
I connected this Cr Touch probe to my ender 3 with skr mini e3 v2 board earlier today. I have never seen such nice and even layers.I’ve had this printer for about 3 years and in that time thought I had gotten really good at manually leveling the bed. This CR touch is absolutely a big improvement.I have been printing things with large flat bottoms and was chasing perfection but could never do it by manually leveling my bed. I’ve always had a really nicely flat glass bed and this sure doesn’t move the z axis much but it’s definitely compensating based on the mesh measurements.I run the latest marlin build and found UBL was better than bilinear ABL style.If you’re on the fence and have a creality printer just buy it and take the time to set it up well. You’ll be printing better parts than you’ve seen before.Sure I had really good prints and first layers prior to using a touch probe but this should make for a huge quality of life / ease of use improvement.
Norma
Reviewed in Mexico on March 12, 2023
con esta mejora que le di a mi ender 3v2 ya no tengo tanto problema al momento de nivelar la cama, cabe aclarar esto no te quita el hecho de que nivelar la cama cada x tiempo pero si ayuda a que las piezas queden con mejor acabado y sobre todo esa primera capa que a muchos se nos dificultaba que saliera perfecta, la recomiendo
Lex Ramib
Reviewed in Mexico on September 30, 2022
Las instrucciones que traen son pésimas, las hizo un niño chino que no sabía inglés ni cómo instalar el nivelador. No queda otra más que buscar videos en internet y coaching en foros. Ojo, cuando instalen el firmware asegúrense que el archivo sea “.bin” y no tengo ningún otro punto “.” En el nombre o si no nunca va a jalar y en la pág oficial baja con un punto en el nombre , gracias china.
MKay
Reviewed in the United States on November 10, 2022
I had previously upgraded my Creality Ender 3 Pro to the 4.2.7 control board so I already knew how to open up the control bottom plate. As a result of that experience and by watching several on-line videos about the CR Touch installation I found the physical installation of the CR Touch to be quite easy.Trouble begins soon after. I downloaded the correct firmware for the BLTouch (yes even though it's a CR Touch) and it loaded right up on the printer but I noticed Chinese characters on the bottom of the Info screen and fully Chinese on every other screen. This is a 2 year old printer so I have the original small display not the touch screen display. You have to press the button from the Info screen and scroll down to the next to last line and press to reveal the other language choices.After that, the screens don't agree with the small instruction booklet that came with the kit or it's bigger on-line version. So it takes some effort to find the various items that you'll need to access in order to calibrate the CR Touch.After alignment my initial impression of the performance is excellent. Remember to add the G29 command to your slicer and the printer will do a bed leveling prior to every print. It seems to work very well based on my 2 day experience.Sadly, the firmware regularly crashes. You know it crashed because you'll see some Chinese characters on the display. After a crash it forgets the language and it forgets the Z Offset that you entered. You will have to redo these two items.On-line research led me to the Marlin Firmware site where you can download their version of the firmware. You have to register on the site. They request a donation but I understand that you can enter zero. There are some minor differences between this firmware and the Creality firmware but I've been using it for another whole day and it has not crashed.When you use this new firmware or probably the Creality firmware as well, you must try the load filament feature. Sit down and enjoy.
Eduardo Marquez
Reviewed in Mexico on October 30, 2022
The media could not be loaded.
Timthetoolman
Reviewed in the United States on October 15, 2022
Easy enough to install. Have to route a long cable through the umbilical sleeve to the head, but easy enough if you’re patient. This takes the place of the Z limit switch, so that switch can be removed entirely if desired. The firmware for your board has to be downloaded from Creality and updated. My issue with this firmware is that frequently the board resets to defaults when turning on now so everything has to be reset. The menus come up in Chinese when that happens so you know your settings are gone. ( This happens every few restarts) Also when it happens, the Z offset has to be re-programmed. I finally just wrote down the values and re-enter the values without going through the whole process now. That’s my issue with the kit. Other than this, when everything is working correctly, the auto-leveling works great. I don’t have to manually re-level the bed every couple of prints now. Worth the money for the upgrade, IMO. Just wish the Creality firmware issue would get addressed.
Recommended Products