Your cart is empty.
Your cart is empty.Product Description
Creality CR Touch kit Auto Bed Leveling Sensor Kit
The CR Touch is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer.This touch sensor works perfectly with any surface, from glass to blue tape . It makes calibration a breeze - simply press calibrate and your machine does the rest.
Note:
Rotate the knob until the distance between them is about 0.2mm (as a sheet of A4 paper).
- CR-Touch leveling Module x 1
- Mounting Bracket x 3
- Screws x 4
- Connector x 4
- 5 Pin Cable x 1
- Tie x 3
- Brass Nozzle x 4
- Hardened Nozzle x 1
Only Compatibie with 32-bit Motherboard
High-Precision
CR Touch auto bed leveling sensor fulfilled simple structure and high precision. It could work with any kinds of bed materials, such as glasses, woods, metals, plastic and and all materials.
- SELLER WISH
- If you have any unsolvable problems during installation or use, our technical team will provide you with detailed solutions within 24 hours.
- We will be devoted to producing high quality products & providing better service.
jesse allen
Reviewed in Canada on January 2, 2025
got for a ender 3 v2 and worked great plug and play
customer
Reviewed in the United States on October 19, 2024
The installation of the device onto my printer went very smoothly, but the upload of the software for the sensor did not. Not only is it difficult to navigate the Creality website to find the correct download, it was almost impossible to get the printer to recognize the new program. After scrolling the internet for hours, I finally tried giving the file a random name, which miraculously worked. Apparently the printer (mine is an Ender 3) cannot recognize the new file because it shares the same name as a current one. The touch sensor worked perfectly after downloading the sensor’s firmware. This would be a great product if only the software downloading process was better.
Mangal14
Reviewed in the United States on October 10, 2024
Installed on an Ender 5 pro after the Bltouch smashed into a print and bent its probe pin. The creality cr touch installed easily and plugged into the 4.2.7 board with no issues. re calibrated using klipper and everything seems to be working well with regards to probe distance and auto bed leveling.I wish the ender 5 X gantry bracket was designed better to hold the hotend and cr touch. It is not easy to screw in the M4 screws that hold everything in place, especially the one behind the cr touch.
Sean Tomlinson
Reviewed in the United States on April 21, 2024
The CR touch works fine (albeit with my limited use so far), but this isn't reason enough to give this productb5 stars imo. The technology isn't new, creality didn't invent it (I do appreciate the probe being in metal instead of plastic like the BL touch, because... heated bed...).But the reason I'm giving thisb5 stars is Creality's decision to include several well thought out mounting brackets in the kit... Don't roll your eyes and stop reading yet... listen to my experience.I used this product on an Ender 3 V2 at the same time that I purchased a X Axis linear rail kit (also from Creality). I did not; however, order the V2 mounting plate. I ordered the Creality Sprite extruder plate (even though I don't own this extruder yet, I just wanted to keep that option open for the future (I really like that extruder it will be mine one day). None of this is noteworthy so far, everything mounted fine with the V2 bracket included.But then I decided that I needed a 2nd print cooling fan and instead of designing one myself... Thingyverse... maybe you can see where this is going. After sone creative thinking I got the new shroud together with 2 new fans (3 actually) and tried to mount it... printhead is now to large *wide... paused and pondered, a small tie strap and a screw later mounted... too low, below the nozzle, reconfigured, mounted fine.. right CR Touch hole is gone and bracket width will not allow room for mounting (the touch).Mounting tape as temporary measure til I can print a new bracket... hits X axis limit switch.Then U look in the box and there are 2 brackets that will likely work. 1 would require taking off the printhead and another will work fine and will actually work not only as intended but upside down (because for some reason the probe is now too high). Both in metal at that. Good job Creality, 5 Stars, highly recommended.
Patrick James
Reviewed in the United States on September 14, 2023
The CR Touch is an auto-leveling sensor designed to enhance the 3D printing experience, particularly when paired with 3D printers like the Creality Ender series. Here's a review highlighting its key features and benefits:1. **Auto-Leveling Precision:** The CR Touch excels at its primary function—automatically leveling the 3D printer's build platform. It uses a precise probe to measure multiple points on the bed's surface, ensuring that the nozzle is always at the optimal height. This results in consistent first layers and improved print quality.2. **Easy Installation:** Installing the CR Touch is relatively straightforward, especially if you follow the manufacturer's instructions or community guides. It's compatible with a variety of 3D printers, including the Creality Ender series, making it a popular choice among users.3. **Compatibility:** This sensor is compatible with a wide range of 3D printing materials and can be used with both heated and non-heated beds. It's versatile and accommodates various printing requirements.4. **Reduced Calibration Efforts:** With the CR Touch, manual bed leveling becomes a thing of the past. This not only saves time but also eliminates the frustration of fine-tuning the bed level before every print.5. **Improved Print Adhesion:** Proper bed leveling enhances the initial layer adhesion, reducing the chances of print failures caused by warped or unlevel surfaces.6. **Reliability:** Users often report that the CR Touch is reliable and accurate. Once set up correctly, it consistently ensures a leveled bed, reducing the need for frequent adjustments.7. **Community Support:** The CR Touch benefits from an active and supportive community of users who share tips, settings, and troubleshooting advice. This can be invaluable for those new to auto-leveling systems.8. **Price:** While it's an additional expense, the CR Touch is generally considered a worthwhile investment due to the time and hassle it saves in the long run.9. **Longevity:** Many users have reported that the CR Touch is durable and has a long lifespan, making it a cost-effective choice over time.10. **Print Quality:** The auto-leveling provided by the CR Touch often results in improved print quality, especially for intricate and complex models. It helps prevent issues like uneven layers and adhesion problems.In conclusion, the CR Touch is a valuable addition to a 3D printer, offering precise auto-leveling capabilities that greatly improve the printing experience. While it comes at an extra cost, the time saved and the enhanced print quality make it a worthwhile investment for both beginners and experienced 3D printing enthusiasts.
FromCanada
Reviewed in Canada on October 4, 2023
I started having a few problems with bad prints and I couldn't figure out if it was due to bad filament or the bed not being level. The center of the bed was also slightly lower than the corners. I tried fixing that with a couple of sticky notes under the glass and it helped, but I still hated having to manually level the bed whenever I ran into any problems. This has saved me so much time, and uncertainty about what could be causing the problem. I was also able to get rid of the sticky notes since this compensates for any unevenness across the entire bed. I highly recommend this upgrade. Be sure to check out some of the YouTube videos that walk you through the entire installation process because they have some good tips.
Alexander Danis
Reviewed in Canada on October 3, 2023
The CR-Touch is a MUST have if you don’t currently have one. It’s extremely simple to install and is a game changer! My prints would always fail until I installed this!I would extremely recommend this if you own a 3D printer and don’t have this installed yet!10/10
Ricardo Vázquez
Reviewed in Mexico on January 6, 2023
El producto está perfecto más sin embargo me desepciono demasiado que no me llegará el kit de boquillas que menciona que viene incluido, en cuestión de lo demás está perfecto el producto
hector guerrero
Reviewed in Mexico on May 15, 2022
No se si pase a otros pero el firmware bajado de creality hizo ilegible la pantalla y muchos problemas para leer las tarjetas de memoria. Mi equipo es una ender 3 pro con tarjeta madre v422 el sensor funciona pero la interface entre humano e impresora deja we funcionar. ahora estoy en si un cambio de tarjeta madre a la v27 resuelve los problemas o mejor tiro la impresora.
Recommended Products