Your cart is empty.
Your cart is empty.Product Description
CS
Reviewed in the United States on February 12, 2025
I recently purchased this case to hold a Fluke “multimeter” and to keep all the cables with the meter.It’s a quality hard case and is perfect for the purpose intended. An elastic strap holds the meter securely in place and the plus and minus cables go into a zippered compartment located in the top of the case. Everything fits nicely.Then the whole case zips closed.PERFECT !
M. Hutchison
Reviewed in Canada on January 8, 2025
Nice little case, my Fluke 87v and accessories fit inside it very well. It has an elastic to secure the meter and a zippered pocket in the other side to hold the leads, temperature sensor, and extra lead probes. Seems to be pretty sturdy as well.
Richard
Reviewed in the United States on January 27, 2025
I really like this meter case. The only thing that I didn’t like about this one is that it lacks the foam insert to keep the smaller meters like the Fluke 101 snug in the case. I bought this case last year and it came with the insert. I have ordered this twice, for a friend, and both times it did not have the insert, leaving too much room for a meter smaller than the Fluke 87, which I also have for myself.
Craig
Reviewed in the United States on July 18, 2024
I wanted a case for a multi meter I bought here on Amazon. This one seemed the right size. It’s working out great and provides great protection and cable storage space too.
LarryEJ1
Reviewed in the United States on March 20, 2024
Fits the 87v with test leads attached just fine. My magnet holder is modified for field use so it fits while still attached. Hated how bulky flukes attachment point for the magnet was anyway. Nice little case that gets the job done. Didn’t care for the childish lighting bolt so I peeled it off. The mesh portion holds my spare fuses and other test leads & temp probe just fine as well
JMeda
Reviewed in Mexico on February 27, 2024
Excelente producto, buenos materiales, bien construido, cómodo y funcional. El compañero perfecto para llevar tu Fluke 87V en forma segura y bien presentado a todas partes.
Carlos
Reviewed in Mexico on February 10, 2024
Es de materiales resistentes aunque al inicio tenía un olor fuerte a plástico, se le quitó dejándolo abierto un rato. Lo compré para un fluke 233, le quedó perfecto.
Candice
Reviewed in the United States on October 3, 2024
Fits like a glove the only potential con is the magnetic strap that goes in the back of the fluke doesn’t fit in the case well, pokes out distorting the case. I take the magnet off to store it, takes 2 seconds.
Michael Schwartz
Reviewed in the United States on October 21, 2024
Bought this for use with the Fnirsi compact oscilloscope/function generator/voltmeter. For perfectly with room for probes. I like it!
Customer
Reviewed in the United States on April 29, 2024
hard shell protective case that fits the fluke 87. Also has an extra pocket to put leads and accessories definitely worth the price
Stephen Marshe
Reviewed in Canada on September 18, 2023
Great case for my Fluke Multimeter!!
カスタマー
Reviewed in Japan on June 19, 2023
The Fluke 87V fit well in the case.Quality good but I feel that it was a little bit expensive. My friend bought the similar case 50% cheaper. May be I did not spend enough time for research.
Thomas S.
Reviewed in the United States on November 30, 2022
My vintage 1988 Voltcraft DMM (a Conrad West Germany brand, manufactured by and thus identical to METEX DMMs) came in a vinyl case with snapping lid that after 40 years was falling apart at the seams. I'd since the 80's also purchased some additional more flexible silicone leads and various tips that were stored in a separate box. So its always a case of remembering to pick up two cases.This case is big enough so that my DMM and its original leads fit down inside and under the elastic band in the main cavity that is about 4 1/2 " wide inside, 8" tall. All of the extra leads and lead tips attachments all fit into the net zipped compartment in the lid and it all closes with room to spare.The only issue I have is the DMM is held in the main compartment with an elastic band about 1" wide. As we all know, elastics will eventually harden and fail, at which point this will be a loose strap. Its sewn in and can thus have the thread pulled or just cut the elastic out at that point. The product would be better if instead of the elastic band, it had been a 2 part velcro strap. But this is a very minor nit.
Recommended Products
$8.98
$ 3 .99 $3.99