Your cart is empty.
Your cart is empty. 6.2 Deg Tapered Angle Ball Nose for 2D & 3D Carving
Product Specification:
Shank Diameter: 1/4"
Cutting Diameter: 1/32"
Cutting Length: 1"
Overall Length: 3"
Product Description:
★ nACo-blue coating for increased durability long service life, Decreasing the times of changing cutters,Saving production time
★ Excellent for: Brass, Bronze, Composite, Fiberglass, Polyethylene (PE) Foam, Phenolics, Plastics, Polyurethane Foam, PVC, Sign Board,Tooling Board
★ Use for CNC Router, Xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
Package Contents:
1 * Spiral Ball Nose End Mill by YOKISHUN
100% Satisfied Customer Services:
Lifetime Warranty .12 months money back guarantee or exchange
if you have any questions, we are always at your services.
Gordon Prioir
Reviewed in Canada on July 10, 2024
For me its better than a scroll saw, on cutouts
Ron Bowser
Reviewed in the United States on June 7, 2024
This is one of those product you have to use it to believe what great quality it is. I have been making guitar bodies with the bit to do the round over and comfort cuts.This bit is great for doing this and cuts flawlessly.
Findley Wilson
Reviewed in Canada on December 6, 2024
Great bit for the price. For the hobbyist cnc this bit is Great. I've used it on some big carvings and the detail it's put to my work is amazing.
john braidwood
Reviewed in Canada on October 15, 2024
it works great
Monte
Reviewed in the United States on September 23, 2023
These ball nose bits are amazing for finishing up 2.5d relief carves! Totally clean cuts and has stayed sharp through hard and soft woods alike! I would absolutely recommend this for anyone looking to get that extra out of their carves! - 10/10 would get this again!
Humphrey-Tech
Reviewed in the United States on August 5, 2023
I'm very happy with the quality of this bit.I have been using this bit in my home made PrintNC CNC machine with a 1.5 KW spindle. I am getting very good results on 3d carves in pine. The bit came very sharp but unfortunately the tube wasn't labeled.Overall, I can't see much difference in cut quality between this and my more expensive name brand bits. If you're looking to get into 3d carving and would rather not break a more expensive bit, this is your bit. If this one lasts I see no reason not to switch over to these as my primary bits.I highly recommend you give this one a shot just make sure you observe proper feed and speed settings to keep from overheating it and shortening its life.
Paintball K.
Reviewed in the United States on July 9, 2023
Great finishing pass cnc bit. Cuts cleanCuts great
Vine Voice
Reviewed in Canada on July 7, 2023
Initially I really liked this tapered ball-mill. It started out very sharp but unfortunately this doesn't last very long. I did few carvings in both soft and hard wood and it quickly became dull. I think this could be easily prevented by reducing the feed rates. This would be a good thing to keep in mind while using this. Despite this, I would definitely recommend.
Charlie AR
Reviewed in Canada on July 18, 2023
I am a novice when it comes to this kind of cutting bit and wanted to use a proper tool to drive it but the high speed grinder I intended to use was unavailable in time to review. I chucked it into a variable speed 18V drill which is not high enough in speed to suit a CNC bit like this.The small 1/8" ball end is ideal for what I'm looking for - engraving details in stone and wood sculptures. I tried a few samples of each. It was leaving a half round groove of consistent depth and didn't grab or stall or create chipping as it was being manipulated by hand.I look forward to making use of it for that purpose and I'll come up with a few others in time. It's a well finished tool and comes in a tight fitting case for protected storage.
Lucas LaHood
Reviewed in the United States on May 20, 2023
I don’t want to give a bad review because I think the bits are great. Unfortunately one was missing out of the three that were supposed to be sent. I received the pouch that it was supposed to come in with the correct bar code and product number slapped on it but the bit was not in it. No, the bit did not fall out of the pouch into the package. I tore the package apart looking for it and it’s definitely not here. Just a heads up, probably should buy all separately just in case one is missing so you don’t have to send all three back to get one replaced.
Curt
Reviewed in the United States on January 10, 2023
This bit arrived on time, and is the perfect bit for routering signs for woodcarving.
funbear
Reviewed in the United States on September 20, 2022
did some carvings in my CNC and this bit performed flawlesslycut through some walnut like butter.... very sharp...did not over heatbit is VERY competitively priced, will be buying more bits from this company, recommended!4.5 stars
Jeffrey Sgrignoli
Reviewed in the United States on December 26, 2022
Great bit for the money. 3D images come out clean even when made with a small size for the image.
Recommended Products
