Your cart is empty.
Your cart is empty.Product Description
GRAMUNT Lionel
Reviewed in France on February 9, 2025
Correspon à la commande
GRAMUNT Lionel
Reviewed in France on February 9, 2025
Correspon à la commande
wolfram s.
Reviewed in Germany on February 6, 2025
Sehr gut.
wolfram s.
Reviewed in Germany on February 6, 2025
Sehr gut.
joe
Reviewed in the United States on February 16, 2025
OEM was NVMe. No place to mount a 2nd drive. This did it easily.
joe
Reviewed in the United States on February 16, 2025
OEM was NVMe. No place to mount a 2nd drive. This did it easily.
rob s
Reviewed in the United Kingdom on February 10, 2025
Does the job. Everything that was needed was included.
rob s
Reviewed in the United Kingdom on February 10, 2025
Does the job. Everything that was needed was included.
Andy Beals
Reviewed in the United States on August 14, 2024
This little kit comes with all the screws you'll need to install four drives into the two trays and put the trays into bays. It comes with a nice #2 Phillips screwdriver. It only comes with half the cabling you'd need - two SATA cables and one SATA power splitter cable. I get why - all of the stuff they do provide fits into the small box that's little bigger than the drive frames themselves.
Andy Beals
Reviewed in the United States on August 14, 2024
This little kit comes with all the screws you'll need to install four drives into the two trays and put the trays into bays. It comes with a nice #2 Phillips screwdriver. It only comes with half the cabling you'd need - two SATA cables and one SATA power splitter cable. I get why - all of the stuff they do provide fits into the small box that's little bigger than the drive frames themselves.
Jörg Hildebandt
Reviewed in Germany on May 15, 2024
scheller aeinbau alles hat gut gepasst. danke
Jörg Hildebandt
Reviewed in Germany on May 15, 2024
scheller aeinbau alles hat gut gepasst. danke
Paul
Reviewed in the United States on March 18, 2024
This is a good bracket, and, I think a good value. For 10 bucks they give you TWO of them -- and hardware, and cables. I needed two, because I'm mounting four SSDs.Still, there are a couple of challenges. If you can see it in my photos, the two drives mount pretty close together. My power cables are daisy-chained. There's no way that one can mount two drives into one of these brackets and then get one of my power connectors onto each. I thought I was brilliant when I got the idea to turn one of the drives over, so that each power connector would be next to a data connector., but there' still not enough room. Luckily, they include a splitter-extension that plugs straight in, with no overhang. Great! That takes care of one bracket and two drives. But there are two brackets and four drives. With any luck Amazon will get me the additional cables that I purchased today by tomorrow. It COULD happen. The also include two data cables. Cleverly, one end has a right angle connector. If you mount the two drives back to back so that each data connects cable points away from the other drive, it will work. Unless, like me, you have attached the two brackets together. One might get lucky and have space enough to use the right angle connectors at the motherboard end. Not me. Even if they did, I bought brackets for four drives, and they sent two cables. If I had known, I could have the other four cable here by now. But at least they supply the hardware! Oh, wait -- not enough for four drives and two brackets.I still sincerely think these are a good value. But the job would be done by now if it were clear that they were sending only enough ancillary parts for two drives.
Paul
Reviewed in the United States on March 18, 2024
This is a good bracket, and, I think a good value. For 10 bucks they give you TWO of them -- and hardware, and cables. I needed two, because I'm mounting four SSDs.Still, there are a couple of challenges. If you can see it in my photos, the two drives mount pretty close together. My power cables are daisy-chained. There's no way that one can mount two drives into one of these brackets and then get one of my power connectors onto each. I thought I was brilliant when I got the idea to turn one of the drives over, so that each power connector would be next to a data connector., but there' still not enough room. Luckily, they include a splitter-extension that plugs straight in, with no overhang. Great! That takes care of one bracket and two drives. But there are two brackets and four drives. With any luck Amazon will get me the additional cables that I purchased today by tomorrow. It COULD happen. The also include two data cables. Cleverly, one end has a right angle connector. If you mount the two drives back to back so that each data connects cable points away from the other drive, it will work. Unless, like me, you have attached the two brackets together. One might get lucky and have space enough to use the right angle connectors at the motherboard end. Not me. Even if they did, I bought brackets for four drives, and they sent two cables. If I had known, I could have the other four cable here by now. But at least they supply the hardware! Oh, wait -- not enough for four drives and two brackets.I still sincerely think these are a good value. But the job would be done by now if it were clear that they were sending only enough ancillary parts for two drives.
PAP
Reviewed in the United States on February 13, 2024
I purchased two-pack this along with an SSD. The two-pack was just slightly more expensive than a single adapter. It turned out that I didn't need it for the machine I was working on... so I ordered another SSD and used one of these in a different machine! I left the 3.5" HDD in there as a second drive but I'll need the other adapter when I get around to replacing that HDD. Everything lines up and it installed very quick and easy. I didn't need the cables but they look okay and should work fine.
PAP
Reviewed in the United States on February 13, 2024
I purchased two-pack this along with an SSD. The two-pack was just slightly more expensive than a single adapter. It turned out that I didn't need it for the machine I was working on... so I ordered another SSD and used one of these in a different machine! I left the 3.5" HDD in there as a second drive but I'll need the other adapter when I get around to replacing that HDD. Everything lines up and it installed very quick and easy. I didn't need the cables but they look okay and should work fine.
chezpasfer
Reviewed in France on October 30, 2024
Qualité
chezpasfer
Reviewed in France on October 30, 2024
Qualité
DIA
Reviewed in the United States on January 6, 2024
Tiny screws, tiny screwdriver, bracket, wires - everything fits inside the PC and it comes with extras! After 2 years the screws have not rusted or come loose. They just as shiny as when first purchased. Wires are still in excellent condition as well. Bought this again just recently for a friend who was unsure what kit to buy and gifted this to him since it worked for me.
DIA
Reviewed in the United States on January 6, 2024
Tiny screws, tiny screwdriver, bracket, wires - everything fits inside the PC and it comes with extras! After 2 years the screws have not rusted or come loose. They just as shiny as when first purchased. Wires are still in excellent condition as well. Bought this again just recently for a friend who was unsure what kit to buy and gifted this to him since it worked for me.
Brent
Reviewed in the United States on January 4, 2024
Very easy to use and all the items needed are provided
Brent
Reviewed in the United States on January 4, 2024
Very easy to use and all the items needed are provided
Terrapin
Reviewed in the United States on November 12, 2023
I get a lot of use out of these, cold swapping 2.5" hdds. Having 2 positions for the hdds in the same rack is a nice feature. I don't use 2 hdd's at the same time, but it does allow me to position them to where I don't have to bend my SATA power cables or worry about stress put on the drive connector points because of pressure on the cables. One does seem like it has just a smidge of a wider angle, making it difficult to wedge into my 3.5" drive bay slots, but with a little effort it fits. The screws are typical HDD screws, but good quality. SATA cables included are also good quality, with one 90° angle plug and security clips to keep them in place. Kind of wish they weren't at 90° angles, as it makes it difficult to place them in certain places either on certain motherboards or if there's any metal ledge behind where the caddy will sit. Haven't tested the SATA splitter, but it's also a nice addition. 10/10 would purchase again if I needed extras.
Terrapin
Reviewed in the United States on November 12, 2023
I get a lot of use out of these, cold swapping 2.5" hdds. Having 2 positions for the hdds in the same rack is a nice feature. I don't use 2 hdd's at the same time, but it does allow me to position them to where I don't have to bend my SATA power cables or worry about stress put on the drive connector points because of pressure on the cables. One does seem like it has just a smidge of a wider angle, making it difficult to wedge into my 3.5" drive bay slots, but with a little effort it fits. The screws are typical HDD screws, but good quality. SATA cables included are also good quality, with one 90° angle plug and security clips to keep them in place. Kind of wish they weren't at 90° angles, as it makes it difficult to place them in certain places either on certain motherboards or if there's any metal ledge behind where the caddy will sit. Haven't tested the SATA splitter, but it's also a nice addition. 10/10 would purchase again if I needed extras.
Jason
Reviewed in the United States on October 18, 2023
This was an easy to install upgrade for an older PC case that does not have existing hard drive mounting brackets for 2.5" SSDs. It allows making even better use of the space with mounts for 2 drives, but I am currently only using 1 drive in each mounting bracket. I will upgrade my review later if I find that mounting 2 drives to the same bracket is any different of an experience. An added bonus is that this kit comes with a bunch of screws for mounting SSDs that never come with the drives, a power splitter cable, and some SATA cables.
Jason
Reviewed in the United States on October 18, 2023
This was an easy to install upgrade for an older PC case that does not have existing hard drive mounting brackets for 2.5" SSDs. It allows making even better use of the space with mounts for 2 drives, but I am currently only using 1 drive in each mounting bracket. I will upgrade my review later if I find that mounting 2 drives to the same bracket is any different of an experience. An added bonus is that this kit comes with a bunch of screws for mounting SSDs that never come with the drives, a power splitter cable, and some SATA cables.
Recommended Products