Your cart is empty.
Your cart is empty.Product Description
ard78641
Reviewed in the United States on January 6, 2025
Be sure to clean really good with soap and water then pat dry, do not use IPA. Then raise bed temps by 10c and enjoy the cool effects!
Jason
Reviewed in the United States on January 5, 2025
These are hard to get first layer adhesion on but once you get them dialed in they work great. No real complaints; the texture will only last a hundred prints or so but the price is right and the quality is good enough.
Erynn
Reviewed in the United States on January 17, 2025
This build plate works great with the Bambu P1S. It's got good adhesion and the smooth pattern is really fun to see on the bottom of the 3D prints.
Amazing
Reviewed in the United States on January 16, 2025
At least not without raising temp/only using TPUPETG PLA NYLON ASA does not seem to work well.I don’t like to use adhesives on build platforms so this a big no no.
Oh hey...
Reviewed in the United States on December 4, 2024
Great plate to add some fun bottom texture to prints. This one is the Smooth PEO (geometric shapes) +Smooth PET (carbon fiber style) plate. After removing the clear plastic on both sides and washing the plate with warm water and dish soap (and letting it dry), I simply put it in my printer, selected the textured PEI plate settings (with plate detection turned off since this doesn't have the QR codes on the plate), and hit print.What I got was a perfect print, no tweaks needed. The PLA stuck great and after printing, I just let the plate cool and the print slid right off. The pattern transferred perfectly to the item I printed and looks really great in person.I'm very happy with this plate and how simple it is to use. I didn't need to tweak any settings at all and I had no issues. I would gladly buy this plate again if this one gets worn out or damaged.
Joshua B.
Reviewed in the United States on December 28, 2024
These build plates are fantastic! Both sides are smooth PEI, and the adhesion is top-notch. Prints stick perfectly during the job and release easily when the plate cools down. I’m using this on my Bambu P1S printers, and it’s been working flawlessly.What really amazes me is how this plate transfers the holographic effect onto my prints—it’s like magic! Every time I peel off a finished model, I’m blown away by how clean and sharp the results are. I’ve been collecting different build plates for a while, and this one is hands down one of the best I’ve used.The build quality is excellent, too. The spring steel is super durable and doesn’t warp or lose its shape, no matter how much you bend it. Cleaning is quick and easy—just a bit of isopropyl alcohol and a lint-free cloth, and you’re good to go.I’ve used this plate with a variety of filaments like PLA, PETG, TPU, and even nylon, and it handles them all like a champ. The adhesion is consistent across every material I’ve tried. I didn’t have to mess with any special settings for my P1S—it just works perfectly right out of the box.If you’re looking for a smooth, reliable, and versatile build plate for your P1S, this is a must-have. It’s incredibly well-made, delivers amazing results, and is a joy to use. Highly recommend it!
Davis
Reviewed in the United States on December 23, 2024
This dual-sided PEI build plate for the XC1 has been a fun addition to my setup/prints. Both sides are smooth but have subtle, but noticable patterns that transfer onto prints, giving them a unique and retro vibe—perfect for the bookmarks I've been making for gifts. The adhesion is great as well; every print I’ve done so far (8–10 runs) has stuck perfectly, with no warping or failed starts.With dual smoothness on either side, it’s easy to switch between them depending on the looks Im going for. Cleaning it with alcohol between prints and washing with soap every so often is essential to keep that great adhesion, but even when I forget to clean it, the plate has still held up. I also make sure to manually level the bed since this plate doesn’t have auto-detection like Bambulabs plates. Once set up, though, it’s rock-solid—prints pop off cleanly after cooling, and the whole process and quality feels like something from Bambulab. Definitely a cool upgrade if you’re into unique smooth finishes and reliable adhesion.
Customer Review
Reviewed in the United States on November 15, 2024
I ended up getting a different design than I ordered, so that's not ideal, but the one I got was still very impressive. The designs transfer onto the print very well. It also fits the bed and magnetics as expected. A simple heat plate profile and a QR code gets this working exactly as you'd expect. I love printing with designs because it adds some unexpected flair. Especially if it's an industrial print. Cleaning is also easy, using Isopropyl alcohol and you're good to go. I'm sparing with the Dawn and water on these third party plates because I've had some rust before. That's also mostly for plates that need glue.Liking the design I did get.
Recommended Products