Your cart is empty.
Your cart is empty.Minimize dust during drilling and chipping applications using the Bosch HDC300 SDS-max Hammer Dust Collection Attachment. Easily installed on all Bosch SDS-max and Spline rotary and demo hammers without removing the shroud. The metal extension arm increases durability to accommodate different chisel lengths. Prevent damage with the rubber bumper to cushion the shroud if it contacts the work piece and easily adjust the attachment using the adjustable metal extension arm. Accommodate different hammer/hammer tube sizes with three adaptor sizes, while a flexible band easily clamps to SDS-max and Spline hammers. Fits 1-3/8-Inch vacuum hose nozzles and is compatible with the snap-in connector on the Bosch VAC Series Dust Extractors. Optional adaptors available for 1-1/4-Inch and 2-Inch hose nozzles. Kit includes dust collection attachment, extension tube, and 3-hammer tube adaptors.
Hector G
Reviewed in the United States on April 16, 2023
The attachment to extend it is a little long for the bits I have. It be nice if there was another extension that was slightly mid length. Other than that it works great.
Anthony
Reviewed in the United States on July 16, 2021
It is a little awkward to mount since you cant adjust the length once you have it on. Once you figure out the setting for your tool length you know how to set it before you mount it. Solid grip from clamp, doesnt interfere with the work, stays on the tool, and with a good vacuum it pulls dust well. Came with adapters and a chart for bosch tools.
Fernando
Reviewed in the United States on April 4, 2021
Nice
ConnieB85
Reviewed in the United States on November 9, 2020
I actually have a Bosch SDS Plus hammer drill, but I was able to secure the dust collection attachment to it without difficulty. This attachment significantly reduced the amount of dust in the air as I removed a ceramic tile floor. I used a shop vac equipped with a HEPA filter for dust collection.
Gtin
Reviewed in the United States on June 10, 2019
This item is not designed or recommended for the Bosch SDS Plus hammer drills, but it will work fine, you just have to attach it on the tool main body as there is not enough space in the spindle area. The SDS Max have a much longer front area and the the dust collector attaches there.This was the only dust collection system I could fine for an SDS Plus. It really works very well when hooked up to my Festool CT48 or CT26, no dust at all when using hammer function to remove floor tile and thin set, from concrete floor.I found that by angling the mount slightly to the left or right of center the unit attached very firmly.
J. Henson
Reviewed in the United States on May 10, 2019
Works great, but it needs a longer bit than you might think. I was trying to use it with a tile chisel bit, and the bit was to short so it was jamming up. also be aware that you will need some sort of adapter to hook up to a shop vac hose.
Ricardo S.
Reviewed in Mexico on September 27, 2017
Buen producto, cumplió con mis expectativas, la entrega del producto a tiempo sin problemas.recomendado para los que necesiten contener polvo en la demolición de elementos de concreto.
Justin T
Reviewed in the United States on September 26, 2016
Sucks up all the dust. Works great. It's just a little bulky but l can live with that. Just make sure your vacuum hose is the right size otherwise you will need to duct tape it to the collector port.
Customer
Reviewed in the United States on February 16, 2016
Bought this for tile demolition, to match ability of Dustram, as seen on Youtube. Used with Bosch DH507 demolition hammer, and Oneida Dust Deputy, to control dust collection.Use with 2 1/2" vacuum hose, to maximize suction.
Recommended Products
$129.99
$ 53 .99 $53.99
$506.83
$ 99 .00 $99.00