Your cart is empty.
Your cart is empty.From the Manufacturer
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new conditions. Some tools may contain cosmetic blemishes. The fastest, longest lasting breed of rotary hammer the totally redesigned bulldog xtreme outlasts the competition in both speed and performance. Multi-function selector has 3 modes of operation: rotary hammer, hammer-only and rotation-only mode. Vario-lock positioning rotates and locks chisel into 36 different positions to optimize working angle. The patented rotating brush plate provides equal power in forward and reverse. Cord turret has a 35-Degree pivot for added flexibility and longer cord life. Sds-plus bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Variable-speed reversing trigger for accurate bit starting as well as removing fasteners or bound bits. Integral clutch helps minimize torque reaction. The 11255vsr has a comfortable d-handle grip design for greater control, especially when drilling overhead or downward.
MM
Reviewed in the United States on February 26, 2025
I am impressed. Was a little hesitant about buying refurbished. Got it today and it is in immaculate condition. You would have no clue from looking at it or using it that it was refurbished. I give credit to whomever works on these items. They do a great job.
Jesus Eduardo Torres Ortiz
Reviewed in Mexico on February 13, 2025
Pues en estética está muy bien solo traía dos Rayones pero cosa de nada, se siente fuerte al perforar sobre concreto con brocas de ½, solo el tiempo dirá qué tanto aguanta la herramienta
Lizzy Rent
Reviewed in the United States on January 8, 2025
I got it for my father for a birthday gift. Few days later he calls me back saying that it works great and that is light. Ask me to order another one for his brother
Bahamaroot
Reviewed in the United States on September 30, 2024
Excellent deal and an excellent tool. The one I received looked brand new.
Kevin M. Miller
Reviewed in the United States on September 13, 2024
This is third one I have purchased. First two lasted a long time and worked well in a contractor setting. Now retired I didn’t plan on buying a new one (gave other two to grind and son-in-law) but a personal project came up that my other hammer drill (battery powered) wasn’t sufficient for. Great tool!
Gus Lopez
Reviewed in Mexico on May 14, 2024
La calidad de los materiales es muy buenaEl motor se escucha bienLa durabilidad sólo el tiempo la dira pero se siente muy fuerte y piendo que dandole sus descansos va a durar mucho
Maxi
Reviewed in Mexico on February 20, 2024
Llegó antes de la fecha
James D Craig
Reviewed in the United States on December 15, 2024
Hammer drill worked great. Even though it was labeled as a re-manufactured tool, there were no signs of any blemishes, damage or previous repairs or adjustments made.
Juan José Román Rojas Carrizales
Reviewed in Mexico on October 23, 2024
EXCELENTE HERRAMIENTA.
ian goodall
Reviewed in the United States on October 4, 2023
So far the chisel function works goodTrick is to not bear down on it. Let the tool do the work… gentle pressure
D. Brown
Reviewed in the United States on January 5, 2011
I purchased this tool for a single project, working on our new front porch. The design calls for 12 3/8" holes to be bored into a 15-year-old concrete slab for mounting strike anchors. So far I've drilled four of the holes, and I must say that this tool has turned what I was expecting to be a real fight into a pleasure.Prior to this, my only experience with drilling masonry was an attempt two years ago to mount a door stop into a freshly-laid tile-over-slab floor. I managed that installation with a quarter-inch impact-rated masonry bit, the hammer drill setting on my Milwaukee cordless drill, and a great display of stubbornness. Boring the inch-deep hole took nearly ten minutes, and totally destroyed the masonry bit. As you can imagine, when this project came up and demanded TWELVE holes of half again the diameter and four times the depth, I decided that some better tooling was on the list. This Bosch DELIVERED.Each hole took perhaps twenty seconds to drill into the aged concrete, using a 10" Bosch bit purchased from a local big-box store, and the bit looked as good at the end of the four as it did at the beginning. After brushing off the dust, you'd never know it had been used at all.A few closing notes:1: Wear ear plugs, this is a LOUD tool.2: I vastly over-purchased for the job, but in this case overkill makes the project EASY.3: This reconditioned tool looks new. There was a very slight amount of concrete dust on it, and it came in a 'reconditioned' cardboard box instead of the normal one. If it had been in a normal box, I would never have even noticed it wasn't brand new from the factory. A heck of a deal!UPDATE - 02/16/11I've used the tool several more times since I wrote the review. I drilled ten more 1/4" holes in a second slab of the same age as the first, to a depth of two inches (using the stop rod) to install floor anchors for some trim strips in our lower level. As before, performance was smooth, powerful, effective and loud. I have another project coming in the following months (installing a gate and post adjacent to a concrete retaining wall) that will require additional drilling, this seems to be the kind of tool that possession ends up breeding ideas for its use!UPDATE - 01/07/16Just used it again, this time to drill four very small-diameter holes with a Tapcon-branded bit, to hold down a new doorjam in the shop with (surprise) tapcons. Worked great, still just as awesome and as noisy as ever. Drilled two inches deep into fifteen-year-old concrete in a matter of just a couple seconds.
David M.
Reviewed in the United States on April 22, 2010
Always wanted a proper Hammerdrill for use around the house, have commercial units at work and get frustrated with 1/2" conventional drills that have a hammer function and standard chuck that slips with carbide smooth shank bits. This Bosch Hammerdrill uses the "SDS +" drill bits that are available on Amazon from Dewalt, Milwaukee & Bosch as well as other manufacturers, these bits are available in 1" and smaller sizes and for reasonable prices if you look around for packages. You can also buy dedicated chisels for this Bosch drill as it has a Hammer only setting.This Bosch drill is perfect for my use and drills holes pretty quick compared to a light duty 1/2" hammerdrill. Bosch has bigger hammerdrills for more money but this was all the drill I needed and at a great price point. The "recon" model saved me $90 that I quickly spent on bits and chisels to outfit my new hammerdrill (bought more than I needed, but that is okay!). There is one small mark saying "Recon" on the drill, otherwise everything looked brand new including the case, I am very happy with the purchase and would recommend CPOBOSCH & BOSCH products to all. Besides the name brand hammerdrill bits, look for Hitachi & Heleta on Amazon for deals as well as the 11 piece sets that Amazon has available, the one I bought came in a nice carrying case that I can hand my son along with the drill and not care if he ruins a bit when he uses it.
Recommended Products
$229.00
$ 97 .99 $97.99
$506.83
$ 99 .00 $99.00
$138.99
$ 60 .99 $60.99