Your cart is empty.
Your cart is empty.The M.2 SSD cooler MC1 provides efficient cooling, enabling maximum read/write speed for single and double sided M.2 2280 modules. ● Lower temperatures for your M.2 SSD ● Allows maximum read/write speed and extended lifespan ● Fits both single and double sided M.2 2280 modules ● All-black finish for an elegant look
Customer
Reviewed in the United States on February 28, 2025
Quick and easy install. Just a little extra protection with heat dispersion.
Arlene
Reviewed in the United States on January 21, 2025
The price and quality were good
Rob P.
Reviewed in the United States on January 2, 2025
This heatsink is incredibly easy to install, it comes with good instructions and fits perfectly on the motherboard. The company but in a lot of thought behind the packaging design. It comes with 4 tiny screws that are needed to secure the cover but instead of having the screws loose or in a tiny bag they attach them to a piece of one sided tape so they don't go all over the place when you remove them from the packaging. Furthermore on the side of the tape that is sticky where the screws are they provide a small section that is not sticky. What you do is put your one finger on the none sticky section of tape and with your other hand and fingers you remove a screw and then just lift your other finger off the tape, Genuis! Since the screws are tiny and most people would not have the correct tiny screwdriver they provide one in the package. This is the heatsink to purchase, the pricing is great, the packaging is great, the included screwdriver is very thoughtful.
meine39
Reviewed in the United States on July 10, 2024
I have a TEAMGROUP MP33 256GB NVMe drive installed in a 2U server chassis as a boot drive for my home server/NAS. I recently installed a 3 bay 3.5" HDD hot-swap dock in the 2U case's 2x5.25 optical drive bay, and was curious about temps of the 3x3.5 HDDs I installed, so I downloaded HDDSentinel to check out the temps.The 3.5" HDDs were all running at an acceptable ~30C, but the TEAMGROUP MP33 256GB NVMe drive was showing a frightening operating temp of 50C.I purchased and installed this be quiet! MC1 M.2 SSD Cooler Heatsink, and the temps immediately dropped down to 40C, better but still not great. I reconfigured the BIO fan settings for the 2x80MM cooling fans at the front of the case to run at full speed, and temps dropped another 10C to an acceptable 30C.The heatsink is well made and includes a tiny screwdriver to install it. The 10C drop in temperature is impressive. I docked the review one star for the price - TBH if I had known that the TEAMGROUP MP33 256GB NVMe was going to run so warm, I likely would have spent the additional money I shelled out to add the heatsink to get a better NVMe drive that perhaps includes its own heatsink or overall just runs cooler.The heatsink has peel-and-stick thermal pads on both the top and bottom of the NVMe drive, so it is a "one use" item, meaning if you end up removing the heatsink, it likely won't stick too well to another NVMe drive - I saw some complaints about that in other reviews, unwarranted IMO. This is a well made and effective item.
Rast
Reviewed in Italy on June 16, 2024
Che dire, è un ottimo dissipatore per m.2 , non occupa spazio ed è molto facile da installare.Crystaldisk sengna circa 15°c in meno.Super consigliato, anche per chi è poco pratico
M.Histre
Reviewed in France on May 9, 2024
Le dissipateur thermique pour SSD M.2 Be Quiet! MC1 est un accessoire de qualité supérieure conçu pour maintenir des températures optimales lors de l'utilisation intensive de votre SSD M.2. Sa conception robuste et efficace assure un refroidissement efficace pour les modules de stockage 2280 à simple et double face.Grâce à sa structure bien pensée et à ses matériaux de haute qualité, ce dissipateur thermique aide à réduire la chaleur accumulée pendant les sessions de travail intensives ou de jeu prolongées. Cela contribue à préserver les performances et la durabilité de votre SSD M.2 en évitant les risques de throttling thermique ou de surchauffe.De plus, l'installation du dissipateur est simple et ne nécessite pas d'outils spéciaux, ce qui le rend accessible à tous les utilisateurs. Sa taille compacte et son design discret lui permettent de s'intégrer harmonieusement dans votre système sans compromettre l'esthétique ni la compatibilité avec d'autres composants.En résumé, le dissipateur thermique Be Quiet! MC1 est un choix judicieux pour ceux qui cherchent à optimiser les performances et la durabilité de leur SSD M.2, tout en assurant un fonctionnement silencieux et fiable.
The Review
Reviewed in the United States on December 21, 2024
I saw a review about bricking their ssd and another about it being too high. So I bought this on a whim because I needed a heatsink for my secondary drive and I can say this works as intended. The design on this heatsink is pretty slim and was able to fit under my gpu (7800xt) on a mATX board. Other reviewers mentioned tiny screws.. Yes they are pretty small BUT to avoid searching for tiny screws in your case just assemble the heatsink in a controlled area in case you drop a screw then install it on the mb. Another thing, the heatsink does not include a m.2 screw those 4 screws are for the heat sink assembly (2 on each side) .
GT
Reviewed in the United States on November 28, 2024
Installation was really easy, I hadn't gone inside a computer in 3 years and it always makes me nervous anyways as I have somewhat large hands. Before completely sticking the thermal pads to my SSD, I made sure it fit snuggly in my Rog Ally x handheld with the SSD (these have a bit more space - I wouldn't try it in an older Rog Ally version).It fit perfectly well without hitting the motherboard, and without crushing the battery cables. My SSD now runs 10-15 degrees cooler (Celsius). This isn't actually necessary according to the handheld manufacturer, but for the price it's good peace of mind.Highly recommended.
Clint Wade
Reviewed in the United States on October 7, 2024
Dropped my temps by 10C. Highly recommend.
Kirk
Reviewed in the United States on January 8, 2024
I installed this on my secondary NVME since my primary had a heatsink that was part of my motherboard. Before installing this heatsink, I would routinely see 10-15C deltas from the primary drive (with heatsink) to this drive (without heatsink). After installation, its dropped at least 10C off my idle temps, and roughly 10-15C off loaded temperatures. Now temps are right in line for both drives. If you want to prolong the life of your NVME, I highly suggest getting a heat sink.The BeQuiet unit her was a breeze to install, and was happy it came with its own thermal pads and a screwdriver for installation.100% would buy again, and I should have bought this sooner.
Arthur
Reviewed in Saudi Arabia on August 15, 2023
I used it on my PS5 without any problems.
RawLu
Reviewed in Canada on December 5, 2023
Worth it just for the cool little magnetic screwdriver you get with it! LOL!Bought a super efficient power-supply from them years ago was well worth the investment.
Alan
Reviewed in the United Kingdom on June 7, 2022
What a nice product. Easy to follow instructions and screwdriver that works for full installation process in a PS5 provided. My Crucial SSD fit perfectly in this, which had no issues fitting in PS5 (and you can replace the PS5 SSD cover on top should you wish to).The screws to secure the heatsink are tiny, but work in a bright environment, and magnetised to provided screwdriver, and you should have no issues. I like that they are packaged in a compartment behind tape, it's little touches like this that make sure nothing goes missing.Drive works OK with no overheating, though I'd expect it to anyway - however other reviews here shows it is effective in keeping temps down.For a similar price to many cheaper products, provided with rubber bands and the like, this is way better and still provided at a good price. Highly recommended.
Recommended Products
$10.99
$ 5 .99 $5.99