Your cart is empty.
Your cart is empty.Product Description
BACOENG Manufacturer & Distributor of Top Pneumatic Supplies
- VITON solenoid valves are available for use in corrosive fluids.
- Keep piping clean before installation
- Note the insulation of the circuit
- Install solenoid valve in the direction of water flow
BACOENG Solenoid Valves (Normally Closed)
Product Feature:
- The valve body part is made of high quality material, with strong corrosion resistance, sturdy and durable.
- BACOENG Solenoid valve uses electric signal, can work for automatic or Remote control, property stably, easy to use. With the use of pure copper coil, the valve can be opened and closed in one second, and the service life is far more than one million times.
Parameters:
- Pipe size: 3/4"
- Voltage:AC 110V
- Material: Brass
- Operation Mode: Normally Closed
- Available : Water, Gas, Oil (non-corrosive)
Thicker Pipe Wall & Clear Threads
- Thickened pipe wall, resistant to high load, and long service life
- Clear interface threads are not easy to slide, and the connection is precise and not easy to leak
Flow Direction
- The valve body is marked with inlet and outlet arrow indication, please use according to the inlet and outlet signs.
- Solenoid valve coil keep in a vertical position.
High Quality Copper Coil
- The copper coil is lower resistance than aluminum coil.
- It can adapt to high-temperature environments and has good stability and corrosion resistance after long-term use.
Wiring
- No Polarity, + and – can be interchanged.
- For two-wires solenoid valve, you do not need to distinguish between positive and negative poles and its performance would not be affected at all.
Usage Scenarios
Warm Tips:
1. Keep the pipeline as clean as possible before installation.
2. When installing the solenoid valve, be sure to wrap the appropriate raw material tape around the pipe threads and adjust the position of the solenoid valve.
3. Pay attention to the insulation of the circuit.
4. Please install the direction of the solenoid valve according to the direction of water flow.
5.Note that your solenoid valve is a VITON gasket, NBR gasket, or other type. NBR gaskets are not intended for use with gasoline, kerosene, or other corrosive liquid products. If your valve needs to be used for these, you can purchase a valve with a VITON gasket from BACOENG.
A. Sempe
Reviewed in the United States on March 22, 2024
Worked great for a shut off valve for my auxiliary diesel fuel tank
Daniel
Reviewed in the United States on November 23, 2024
hooked it up to a 12v adapter and then to a smart plug with a timer. Now i fill you my outdoor cold plunge tub on a timer! So when it gets full, it automatically turns off
Andrea Hammond
Reviewed in the United States on September 23, 2021
I put this in between a 20lb propane tank and a stove for my van and it's safe to say I would never recommend purchasing this. I don't know what was going on with the valve, but it had very restricted flow when it was "open". I couldn't even light my stove with how much was coming out. Second, this thing gets dangerously hot and really fast. Even if you're not using it in a propane system I wouldn't recommend it for this reason. Like it was seriously 30s to a minute of operation and it was too hot to touch.One last thing. If you choose to disregard those pretty important features...mounting it is not easy either. Maybe if it's attached directly to a rigid part of the system it might be okay, but the thing is really heavy and can't be mounted easily otherwise.
Eugene
Reviewed in the United States on April 13, 2021
It dose heat up a bit but I open two holes on the bed of my truck where it’s mounted to let the air rush and cool it down. It worked out ok for me
wren revilla
Reviewed in the United States on September 20, 2020
I have this on my gravity feed auxiliary diesel tank, it works good but overheats after about 15 gallons, I drive for a living and have to pull over to let it cool to transfer more fuel, so i only used this for 3 days and had to change it
Skolror
Reviewed in Canada on November 14, 2020
Awesome value works every time
Farva V3
Reviewed in the United States on September 9, 2018
Using as a valve on a 63 gallon auxiliary Diesel fuel tank. When I was researching for a valve, I heard about the valve overheating if left energized for too long. Another review stated installation of a 100 watt 5 ohm resistor inline with the power lead takes care of the overheat issue. Did it and used it when towing my 5th wheel from NoDak over to Puget Sound and back. No problems. UPDATE: Valve does not appear to like extremely cold temps. Put some fuel into my aux tank this past winter and once opened, the valve would not close until it got warmer. It gets down to -30 here in North Dakota so be guided accordingly. Find a different valve if needed in extremely cold temps.
Customer
Reviewed in the United States on July 22, 2018
Works as expected. Used to control Diesel fuel from auxiliary tank in my Ford F-250. Placed a rocker switch on dash and not have control of fuel flow from tank without having to exit the cab.
Alexis
Reviewed in the United States on November 22, 2016
I need to install a valve located on a brass pipe which is not easily accessible, but I still need turn it on and off periodically. Therefore, an electric valve which can be controlled remotely would solve my problem. I find that BACOENG 3/8" DC12V Electric Solenoid Valve perfectly fits my needs. It is made of brass, similar to the pipe. So I do not need worry about galvanic corrosion. The machining of the fitting is precise and no water leak even at 100 psi. The installation is easy. Both wires can be either positive or negative. The flow is stopped completely with any leak when the valve is closed. I also notice that the valve exert negligible resistance to the flow when it is open. This is a perfect electric valve!
Recommended Products