Shopping Cart

Your cart is empty.

Your cart is empty.

Solenoid Valve 12V for Air co2 Water 1/4 Inch NPT 2 Way Normally Colsed

Free shipping on orders over $29.99

$9.99

$ 3 .99 $3.99

In Stock

About this item

  • Valve Type: 2 Way Normally Closed (Valve opens with energized)
  • Port Size: 1/4" NPT Female Port
  • Coil Voltage: DC 12V
  • Service Media: Air, Gas, Liquid, Water
  • Operation Model: Direct Acting; Flow Model: Uni-Directional



Product Description

solenoid valves

Solenoid Valve for Air co2 Water Products Features:

  • This solenoid air valve body is made of high precision aluminum and has strong pressure resistance,good Seal, safe and reliable to use.
  • The friction resistance in the hole is small, the starting air pressure is low, and the service life is long. Smooth work, no jam in high-speed use.
  • Compact size, easy to assemble and disassemble.
  • The 2v025-08 high-precision guide head is adopted, which is sensitive in response, and the response speed can reach 5 times/second.
  • This product widely controls the flow of various types of fluids, such as air, water, mud, liquid metal, etc.
air valve

2-way normally closed solenoid air valve is to control On/Off of air and inert gas.

Operation principle: ln En-ergized State, Inlet &outlet Holes Open. ln Non-energized State,Inlet & Outlet Are Closed.

We have solenoid air valves of various specifications. Each solenoid air release valve has two interfaces. 1/4 inch or 1/8 inch NPT inlet and 1/4 inch or 1/8 inch NPT outlet.

Electric Solenoid Valve 12V 24V for Air co2 Water 1/4 1/8 Inch NPT 2 Way Normally Colsed

co2 solenoid

Safety & Convenience air valve

Our cap of solenoid air valve is made of waterproof material, which prevents metal screws from being exposed to the outside and fingers fromdirectly touching metal.lt's easier to use than others. lt can be screwed directly by hand, without a screwdriver.

air release valve

High Quality Air Valve by AOMAG

It adopts aluminum air valve body with fine surface treatment, high durability and low air leakage. High-precision valve stem and seal design ensure sealing. Adopt pure copper high-precision pilot head inside, with high sensitivity, stability and no jamming. Long-term use is not easy to heat.

air solenoid

2 Way Normally Closed air valve

The screw threads of the inlet and the outlet are smooth, so that the working speed can be well ensured. Allows you to quickly install and disassemble solenoid air valves. This Solenoid Valve is greatly used for for Air CO2 Compressor.

AOMAG 2 Way 2 Position Solenoid Air Valve

Product Specification of co2 solenoid air valve

  • Material:Stainless Steel, Aluminum
  • Exterior Finish:Stainless Steel, Brass
  • Type: 2 Way 2 Positions
  • Inlet = Outlet = 1/4" FNPT or 1/8" FNPT
  • Inlet Connection Type: National Pipe Tapered
  • Specification Met: CE, ISO 9001, RoHS
  • Voltage: DC12V,DC24V,AC 110V, AC 220V
  • Operation Type:Internally Piloted Acting Type

The solenoid valve (also called co2 solenoid, air release valve, air horn valve, electric water valve, air idle control valve, air valve, air solenoid) is equipped with ED 100% packaged coil for continuous service and continuous energization.Solenoid valves with multiple voltages are available for you to choose from.

Solenoid Air Valve Installation Instructions

  • Clean and rinse the impurities in the pipeline before installation.
  • Be careful not to drop the debris into the pipeline to prevent blocking the solenoid air valve.
  • Keep the direction of air valve body consistent with the flow direction of medium for installation.
  • After the solenoid valve is connected, it should be confirmed whether it should be connected firmly.
air solenoid valves

Pay Attention To :

  1. Before use, check whether the components are intact.
  2. Please pay attention to whether the installation conditions meet the technical requirements, such a Voltage, Working Pressure, Temperature Range, Etc.
  3. When connecting pipes, pay attention to the dust and other impurities in the pipe fittings to prevent impurities from entering the valve body.
  4. Avoid using the product in vibration environment as much as possible.
  5. Pay attention to anti-freezing measures in low temperature environment.
  6. Pay attention to dust prevention of ntake port & vent port when not in use.

Jimmy
Reviewed in the United States on February 17, 2025
Ok
Nicholas B.
Reviewed in the United States on January 2, 2025
Don't buy, lost my money and gotta buy another one. Do yourself a favor and buy local stop screwing with shipping problems
Customer
Reviewed in the United States on July 18, 2024
Product was exactly as described
AJA
Reviewed in Canada on July 11, 2024
Great quality, recommend it!
WM NELSON
Reviewed in the United States on October 5, 2024
I bought this to install on my compressor to drain water from the tank. works great!!
Alejandro Martínez de Maya
Reviewed in Spain on January 10, 2023
Medidas contenidas buen funcionamientoCoge algo de temperatura perdonada preocupante
Joël T.
Reviewed in France on April 16, 2023
Très bon produit . Un peu lourd . Mais ça fait bien le job .
Allan G.
Reviewed in Canada on December 15, 2022
Used on my sawmill for blade lube control, go through 1/4 of the lube I use to
Stuart Singer
Reviewed in Canada on September 3, 2020
Thought this would work for an air horn. Sure it’s 1/4inch threads but the hole for the valve is tiny. It’s a great little unit and it works great but the air flow is seriously restricted.
Luke
Reviewed in the United States on August 6, 2020
Used 10 of these for a project, all 10 worked perfectly out of the box. They're cheap but the manufacturing is pretty good, the threads are cut well and fittings screw into them nicely. Very good considering the price.
Kenneth
Reviewed in the United States on February 9, 2020
Installed 2 of these in my car to actuate a pneumatic exhaust cutout. Knowing so little about inductive loads at the time of purchase I was surprised when it stalled my car upon releasing power. I didn't know it at the time but the collapse of the magnetic field in an inductive load sends a NASTY voltage spike into your electrical system. I added a diode backwards between the positive and negative leads when rewiring them and I never saw the problem again. They have worked as expected this entire time with absolutely no issues.
Bobby J Mullinax
Reviewed in the United States on March 28, 2018
These are good valves for the price. I used these to build a remote controlled braking system for a vehicle for crash testing purposes. The valve is energized remotely and then allows air flow from a storage tank to a shock mounted to the brake pedal. Has enough flow and pressure to fully move the shock, around a 5 in stroke, and maintain pressure on the pedal. Survived a 40 mile per hour impact and is still working fine. Very pleasantly surprised by the performance of this valve.
jim1945
Reviewed in the United States on April 30, 2017
Seemed to work fine but is designed for air not liquid so flow was inadequate for my needs. Would like to see something in the description emphasizing that it is for air, not liquid, and that the orifice is correspondingly small. Otherwise it worked as advertised.