Shopping Cart

Your cart is empty.

Your cart is empty.

AURSINC NanoVNA-F V2 Vector Network Analyzer 4.3inch 50KHz-3GHz HF VHF UHF Antenna Analyzer Ham Radio, 5000mAh Battery, Measuring S-Parameters Voltage Standing Wave Ratio Phase Delay Smith Chart

Free shipping on orders over $29.99

$139.99

$ 67 .99 $67.99

In Stock
  • [Upgraded Version] The NanoVNA-F V2 with latest Firmware V0.4.0, the operation page is compatible with Nanovna-F. This antenna analyzer features a 4.3-inch IPS LCD display (800*480) and a resistive touch screen, providing a wide viewing angle and minimizing eye strain during prolonged usage. It is equipped with an 5000mAh lithium battery for longer standby time, up to 7 hours of usage
  • [Improved Frequency Range] The measurement range of NanoVNA-F V2 is 50KHz-3GHz, which is larger than the previous version (the previous one is 10KHz-1.5GHz). TX/RX method can measure full S11 and S21 parameters, S21 dynamic ranges: 70 dB (1.5GHz), 60dB (3GHz); S11 dynamic ranges: 50 dB (1.5GHz), 40 dB (3GHz)
  • [Compact and Powerful] The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02). It enables measurements of S-parameter, voltage standing wave ratio (SWR), phase map, group delay, Smith chart, DELAY, POLAR, LINEAR and more
  • [Design of Aluminum Cases] Rugged and durable aluminum alloy cases, shielding electromagnetic interference to ensure precise measurements. The SMA radio frequency interface enables seamless connectivity with various measurement devices. The device has a full touchscreen and three side buttons, making it easy and flexible to use
  • [PC Software Control Available] Using PC software NanoVNA Saver, it can connect to the NanoVNA, extracts data for display and save data in Touchstone files. The PC software enables us to export Touchstone (snp) files for various radio design and simulation software. For Win10 system, do not need to install the driver; for Win8 and earlier versions of the Windows system, need to install the driver: https://www. st.com/en/ development-tools/stsw-stm32102.html
  • [Packing List] 1x Nanovna f v2 Host, 1x SMA Open Calibration Kit, 1x SMA Short-circuit Calibration Kit, 1x SMA 50Ω Load Calibration Kit, 1x SMA-KK Double-Head Female Hole Adapter, 1x SMA-JJ Double-Head Male Pin Adapter, 1x SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter, 2x 20cm SMA-JJ RG405 RF Cable, 1x USB Type-C Data Cable, 1x Stylus



Product Description

Upgraded NanoVNA-F V2

The NanoVNA-F V2 portable vector network analyzer based on the NanoVNA-F, featuring a 4.3-inch IPS LCD display and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, support Chinese and English interface

AURSINC NanoVNA-F V2 Vector Network Analyzer Specifications

Material Aluminum Alloy (case)
Display 4.3 inch LCD (Resolution 800*480)
Power Consumption 5000mAh battery (up to 7 hours), USB 5V 200mA
USB Interface USB Type-C
Communication Mode CDC (Serial)
Measurement Frequency 50KHz - 3GHz
Rf Output Power -9dbm (error within 1GHz: ±1dB)
Frequency Accuracy < 0.5ppm (Port SWR: < 1.1)
S21 Dynamic Ranges 70dB (1.5GHz), 60dB (3GHz)
S11 Dynamic Ranges 50dB (1.5GHz), 40dB (3GHz)
2-port Return Loss 20dB typ(1.5GHz), 13dB min(3GHz)
Number of Calibration Points 201 points
Number of Scanning Points 201 points
Number of Traces 4 traces
Scanning Time About 1.9s/time(50KHz-3GHz full frequency band)
Output Capability 5V/1A, Supporting Android and Apple phones

4.3"

4.3inch IPS LCD Touch Screen

  • With wide viewing angle and featuring adjustable screen brightness
  • It ensures long-term usage without straining your eyes
  • The optimized UI design is convenient for users to perform measurement operations

5000mAh/7H

Built-in 5000mAh Battery (up to 7 Hours)

  • With 5000mAh Lithium rechargeable Battery, battery life up to 7 hours
  • Adopted 2A high current recharging IC, ensures shorter charging times
  • Designed with USB power output interface, which can support 5V/1A power output

Calibration Function

Built-in Calibration Function

  • Tap on calibrate to perform calibration, support calibration result interpolation, can measure without recalibration after adjusting the measurement frequency band
  • Setting save: 5 groups (After saving, the saved parameters will be automatically recalled upon startup, no need to recalibrate)
aluminum alloy cases

Sturdy and Durable: All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to improve measurement accuracy, which makes the S21 better than 80dB dynamic range in 1GHz

PC Software Control: With PC software NanoVNA Saver, providing a user-friendly interface. Supports capture screen images from your device using the PC software, enabling you to conveniently view and operate your device through the comfort of a larger display. The test engineer can monitor and control the test process remotely

nanovna f v2

Portable and Flexibility

  • Body size: 13x7.5x2.2cm/5x2.9x0.9inch
  • Packing size: 25X15X5cm/9.8x5.90x2inch
  • Weight: 426.5g/0.94lb
Features

  1. The NanoVNA-F V2 features full touchscreen design, complemented by 3 side buttons that enhance operational flexibility.
  2. The radio frequency interface is SMA, which is convenient for connecting various tested parts

Package Lists

1 x NanoVNA-F V2 4.3 inch host (with protective film)

1 x USB Type C2 SMA cable male to male RG316 RF 20 cm

3x SMA Calibration Kit -OPEN/SHORT/CHARGE

1x Connector SMA-JJ Male A Male

1 x SMA-KK Female to Female

1 x SMA-JKW Male to Right Angle Female

1 x Holder for folding machine

1 x Resistive stylus

1 x EVA protective bag

  • Equipped with high quality calibration parts and RG405 phase stable cable to ensure calibration accuracy
  • Allows for firmware upgrades through a virtual USB drive without the need for programmer, using the included USB Type-C cable to upgrade firmware
  • Note: The signal input strength of the two ports of this instrument must not be greater than 0dbm(1mw), too strong signal input may burn the device
f v2

Various Antenna Measurement for amateur radio enthusiast or a professional in the field of telecommunications

The NanoVNA-F V2, being a lightweight and user-friendly RF test instrument, finds extensive application in the domains of RF circuit design, microwave device performance testing, antenna matching, and other related fields


Kenneth R Smith
Reviewed in the United States on February 15, 2025
Been very pleased with this analyzer. First one i received had a extremely small blur spot in display. Contacted them and had my replacement back within the week. Dont let let this thing intimidate you. Not hard to learn functions. Calibration takes only a minute. Bonus being able to save your calibrations for a later time. Nice unit. I'll always hang onto my mfj, but dang.. The graphing really helps.. Well pleased
Michael W.
Reviewed in the United States on January 13, 2025
Years ago, I installed wireless networks that beamed data from roof-top to roof-top to cell towers. I had access the the expensive equipment to check my antennas. Just recently, I got into MeshTastic which transmits on the 915MHz ISM band (a non-licensed band in the USA). I quickly discovered that the antennas shipped with the inexpensive radios were crap. They were either mistuned or they were 868MHz antennae that were relabeled (but not tuned) as 915MHz. This device lets me test the SWR to see if the antenna is tuned as advertised. I have been writing reviews of any antenna that I buy (this is a good 915MHz antenna. https://a.co/d/h7jje9O). For a few bucks more I got this model because I can test up through 3GHz which covers the 2.4 GHz wifi range. It would cost me twice as much to get the 6GHz model which would also do the 5.8 GHz wifi range.
Gary L Johnson
Reviewed in the United States on January 1, 2025
If you are working with antennas and or electronics you need one of these. There is learning curve that you can get over with the many videos on Youtube.
Eric
Reviewed in the United States on March 30, 2024
This thing is hard to learn, but well worth it
John Jolly
Reviewed in the United States on November 27, 2024
Product quality is good. Came with out a manual. Used QR code in package to locate website. It's in Chinese language. The download for the manual is also in Chinese language.Would be nice to get a manual in English.
Thomas B.
Reviewed in the United States on October 11, 2024
Had a nano VNA with the smaller touch screen. Upgraded to the larger display. The menus have been improved and are more intuitive. Love it.
Scott
Reviewed in the United States on January 2, 2024
Honestly... get off the fence and just buy it already! I debated back and forth with myself then finally went ahead and bought one. Wish I would have done so months ago. Best little tool you can have in your HAM shack. I added a TinySA at Christmas and am super happy with what I can test around the shack with these two instruments.
John Doe
Reviewed in the United States on April 1, 2024
Beware, the product documentation and a link to "PC software" is provided only on the company web site. The "software" is a link to a Github page with no binaries. I would consider every claim above about software to be completely false.Otherwise, the device itself appears to work as expected, but the product description is incorrect at best.
Recommended Products

$2,595.00

$ 99 .00 $99.00

4.6
Select Option

$214.99

$ 84 .99 $84.99

4.8
Select Option