Shopping Cart

Your cart is empty.

Your cart is empty.

LiteVNA-64 VNA Analyzer 50KHz-6.3GHz Portable Vector Network Analyzer Antenna Analyzer 4' Display

Free shipping on orders over $29.99

$199.00

$ 96 .99 $96.99

In Stock

About this item

  • with multiple internal RF switches for S11 and S21 measurements, and IFFT calculations for TDR and DTF measurements.
  • the LiteVNA-64 now brings faster scanning speeds and more scan points in addition to a wider measurement range
  • Combined with an easy-to-use interface consistent with the NanoVNA, the LiteVNA-64 can now be easily used as a field test tool.
  • With a measurement range of up to 6.3GHz, the LiteVNA-64 is capable of meeting common amateur radio and IoT applications, as well as emerging 5GHz testing, enabling the application of the latest 5.8GHz wifi and 5.8GHz image transmission


Description: LiteVNA-64 improves on the popular NanoVNA and SAA2.
Now you can get a portable vector network analyzer (VNA) as small as the NanoVNA and capable of meeting the ultra-wide measurement range of 50 kHz to 6.3 GHz.
To minimize power consumption and size, the LiteVNA-64 uses only one mixer, with multiple internal RF switches for S11 and S21 measurements, and IFFT calculations for TDR and DTF measurements.
Designed with the community's input in mind, the LiteVNA-64 now brings faster scanning speeds and more scan points in addition to a wider measurement range.
Combined with an easy-to-use interface consistent with the NanoVNA, the LiteVNA-64 can now be easily used as a field test tool.
LiteVNA-64 includes a MicroSD slot, so you can save field test data or screens to a MicroSD card at any time.
With a measurement range of up to 6.3GHz, the LiteVNA-64 is capable of meeting common amateur radio and IoT applications, as well as emerging 5GHz testing, enabling the application of the latest 5.8GHz wifi and 5.8GHz image transmission.
Package Included:
- 1 x VNA Analyzer Host (with 2000mAh battery and 4" display)
- 2 x 30cm SMA male to male SS405 RF cables
- 1 x SMA female to female connector
- 1 x SMA calibration kit-SHORT
- 1 x SMA calibration kit-OPEN
- 1 x SMA calibration kit-LOAD
- 1 x USB Type-C data cable
- 1 x Pick


Voxtel
Reviewed in the United States on August 4, 2024
I watched a ton of reviews for these. There is a more robust version out there that apparently has a dedicated high frequency oscillator. But this one works fine for hobby grade tinkering.
Charlie
Reviewed in the United States on July 28, 2024
I'm using this for WiFi and Drone VTX antenna testing and tuning. This VNA needs to be capable of running at 5.8GHz for it to be useful for that application. So far, my testing has proven this little unit to be valid there, which is awesome. Antennas that I knew were working showed up as expected in the plot. Antennas that I had that were suspect showed bad characteristics in the plot. Pictures are of some quality cloverleaf antennas I made, plotted with this device and the freeware app.One thing I will say bad, and this is really only about the art in general, is that everything is incredibly sensitive. Merely re-torquing the SMA connector changes the tuning up/down by an entire channel. An SMA torque wrench would be much better than just my fingers.
DannyP
Reviewed in the United States on May 7, 2024
I like the size, the 4 inch display is a big improvement from the tiny display on cheaper units. The internal battery lasts fie hours of use and recharges very quickly. When compared to other antenna analyzers, it us better in almost every way ad well as being able to be used fir many more functions than just antenna work. Besides tuning antennas to the proper frequency, I have used mine to tune a bandpass filter, calculate the velo itu factor of coax and used it as a weak signal source for checking UHF and microwave radio receivers. The biggest complaint is trying to use the touchscreen or shuttle wheel to access menu options, both leave something to be desired.
tjander
Reviewed in the United States on December 30, 2024
Love the device it works well when plugged into my bush port. However take it to the field and the internal battery lasts about 30-49 minutes then it’s off and needs to charge again.If anyone knows of a solution to this please let me know.Will be happy to take this to 5 stars if I can fix the battery issue
Casey L
Reviewed in the United States on May 27, 2023
Received VNA allegedly in new condition, but it didn’t work as it should due to touchscreen not functioning correctly. Multiple attempts to calibrate touchscreen function didn’t solve the problem. I was unable to check if any VNA function works due to not working touchscreen. It looks like no QA at all.
VexedPhoenix
Reviewed in the United States on December 2, 2023
This VNA is fairly user friendly, at least in my opinion from my experience with VNAs. The unit does appear to operate up to 6.3GHz as advertised (well at least with a thru device, S21 is flat across its functional band). Thus far, I used it to characterize several antenna, very handy for that need.
Steven Hageman
Reviewed in the United States on May 7, 2022
This product works great. Dynamic range at 6 GHz is better than 60 dB. That is good enough for 80% of most users common tasks. Measures fast and accurately.
Recommended Products

$19.95

$ 8 .99 $8.99

4.3
Select Option