Your cart is empty.
Your cart is empty.Product Description
Package Included
1 x Tire Pressure Gauge
1 x ¼” NPT Steel Fitting
4 x Valve Caps
1 x Brass Air Chuck
1 x Thread Seal Tape Roll
1 x Valve core tool
1 x User Manual
AstroAI Accurate 2.5" Glow Dial Tire Inflator with Pressure Gauge 100 PSI
The glow dial makes it easier and more accurate to inflate, deflate and check pressure. AstroAI Analogue tire pressure gauge can meet the 2-3% Grade B40.1 International Accuracy Standard with a resolution of +/- 1 PSI and a range of 0-100 PSI. No more guessing with large 2.5" easy read glow dial tire gauge!
- Specifications
- Dial Type: Analogue
- Measurement Units: PSI
- Resolution: +/- 1 PSI
- Inflation Range: 0-100 PSI
- Accuracy: 2-3% Grade B40.1 International Accuracy Standard
- Compatibility: ¼" NPT air compressor connector
3-In-1 Multifunction Introduction
Press Trigger to Inflate
Simply press the trigger down, the tire will be inflated to exact pressure, then release the handle, it will stop filling. It is easy and time-saving.
Pressure Check
The air pressure gauge can also check the tire pressure with ease. Simply connect the chuck to the valve stem and the pressure will be read automatically .
Press Reset Button to Deflate
The gauge holds the pressure reading until it is reset by pressing the bleed button, which can also be used to deflate the tire when connected with the valve stem.
Luminescent Dial
Extra convenient for filling flat tires at night or in the dark.
Air Compressor Connect
The NPT quick connect fitting will fit most air compressors.
Widely Use Design
Compatible with all industry standard schrader valve stems.
Increased Safety
Inflate and deflate everywhere and anytime to assure your safety timely.
Don Arnold
Reviewed in the United States on February 26, 2025
This is a very nice tire pressure gauge that is convenient to use and is accurate. I especially like the fact the chuck will latch on without leaking. It's very well made and came with spare caps and valve tool as well as Teflon tape in the event you need to change a fitting or something.
RodgerHoll
Reviewed in the United States on February 26, 2025
This is my first trigger style inflator. I really like it.The dial is easy to read and I checked against other gauges, it it accurate.The glow in the dark on the dial face and needle is nice at night. saves needing a flashlight to read it.Has fit all my tires and with the range, can serve from lawn tractors to 80 lbs in my truck.I like that it releases air when the trigger is pulled. helps blow out valve stems that may not have a cap on them before inflating.The hose seems to be good. although a braided hose cover may protect it longer.I think its a good value and will replace it when my kids loose it.
Kelli H.
Reviewed in the United States on February 10, 2025
The AstroAI Tire Pressure Gauge with Inflator, 100 PSI-ANSI B40 is just what you need for tire maintenance. It is well made with an easy to read analog gauge, even in the dark. There is nothing worse than grabbing the air hose and tire gauge to check tire pressure in the winter. First check air pressure than add air, then check air pressure and either add more air or deflate tire pressure cause you added to much. When it’s below freezing your hands get cold. The AstroAI gauge is everything in one. No need to switch between the air chuck and tire gauge. It saves time so your not outside freezing as long. The air pressure gauge registered the same as my other analog and digital gauges. It was also consistent with the car’s tire pressure reading.
TD
Reviewed in the United States on February 10, 2025
Works fine as an inflator, but the gauge reads 4 PSI high (per multiple TPMS sensors and a more accurate gauge). Does the job but I probably need to add a label to remind myself to add 4psi to what I want. It's also a 'right handed' tool - as a leftie, I expect this, but for some reason this one annoys me more than usual since it's not as easy (due to hose length) to turn it where I can see it when I hold it in my left hand.
Bob Brown
Reviewed in the United States on January 27, 2025
works well so far, impressively quick to raise tire pressure, battery run time between charging goodI especially like the auto shut off when set pressure is reached, would highly recommend
Dave
Reviewed in the United States on January 2, 2025
This is a well-made tire pressure gauge, and it looks like it will be very durable. The gauge is very easy to read. I checked the compared the gauge reading to another gauge I have been using; both reading was about the same. The reason I gave the gauge a 3-star rating is because it is supposed lock onto the tire valve stem securely. The gauge I have does not properly lock on to the valve stem and seal, so it leaks. To get it to seal on the valve stem, like any other tire gauge you must securely hold it in place to avoid leaking. I guess I will keep it, I can get it to work, it just doesn't work as well as it should.After writing this review and reading this product, three stars, I was contacted by Astro AI customer service. Astro AI’s customer service is great. They are very thorough and have corrected the problem that I’m having. I’ve changed my rating to five stars. This is a good product good value for money spent.
Frank
Reviewed in the United States on September 8, 2024
I recently upgraded from an air pump to a compressor for a problem tire on my car. Since I have to fill it so frequently I wanted a filler with a gauge.So far my only problem is with the tire valve chuck. As many other reviews have said, the chuck doesn't stay on the valve well and leaks air from the tire. One review said to pull out one of the two thread-catches, but that didn't work in my case. I'll be buying a new chuck, I haven't decided from whom. It's interesting to note that the pics of AstroAI's replacement chucks only have one thread-catch, but the chuck that comes with this gauge has two. And, those two catches are closer to the end of the chuck, I think the they're missing the threads entirely. Not only that, but in two of the pictures of this product there is a single catch but there are two catches in the main photo. [EDIT: I'm guessing that where I see one catch it's a CAD image rather than a photograph.]The rest is fine. Air hose connection is solid. Pressure readings match my stick/pen gauge as well as the car's TPMS when I hold the chuck seal manually. The trigger adds air, the "reset" lets it out.EDIT: I bought a pair of new chucks, AstroAI brand. In the picture the top one is the new one and the bottom is the one that came with the inflator. As I mentioned I did alter the original chuck, I pulled out one of the thread-catch teeth. But look at the differences here: the replacement chuck is far beefier, has a better lever action, and the thread-catch is set deeper into the chuck, which makes it possible to actually catch the threads of the tire valve. The teeth on the original chuck are way too far out, they skip past the threads, which is probably the cause of most of the bad reviews. It's a shame that AstroAI makes you go thru this replacement process when they have WORKING chucks on hand. Feels like a double-dip to me. Like, "buy our product, then buy more of our products to make the original product function as it was advertised in the first place."One thing that seems like common sense but maybe isn't, when you put the chuck on the valve stem, align it so there's nothing in the way so you could give it a quarter or half-turn after. IF you've caught the threads correctly you can give it a twist and make a better seal.
Pasquale 61
Reviewed in the United States on December 27, 2024
The media could not be loaded.
francisco r.
Reviewed in Mexico on September 16, 2022
muy bonito funciona bien para el precio no seme ocurrio comprar dos pero cuando este otra ves a precio bajo lo are
Raul Sergio Flores Cristerna
Reviewed in Mexico on March 9, 2022
Fácil de usar, precio económico y muy útil para mis vehículos
Hector m.
Reviewed in Mexico on March 8, 2022
MUY BUEN PRODUCTO,MATERIALES DE CONSTRUCCION MUY BUENOS,LO RECOMIENDO AMPLIAMENTE
SNK
Reviewed in Canada on April 13, 2021
Broke after 1 week use.
Mwah
Reviewed in Mexico on June 8, 2020
Un equipo muy bueno para inflar llantas con una compresora. Trae adaptador de sellado rápido para manguera de compresora. La boquilla que se conecta a la llanta se fija fácilmente y sella bien. El gatillo permite al presionarlo inyectar aire a la llanta y al soltarlo medir la presión de la misma para saber si es necesario presionar nuevamente. Super cómodo no tener que estar desconectando la boquilla para estar midiendo la presión de las llantas. 100% recomendado.
Recommended Products
$42.54
$ 19 .99 $19.99