Your cart is empty.
Your cart is empty.Product Description
ASNOMY Tungsten Carbide Tipped Metal Hole Saw
Specification:
Material: TCT Carbide；
Cutting Depth: 1-inch(25mm);
Shank Dia.: 2/5 Inch(10mm)
Package Included:
1 * TCT Hole Saw Cutter
2 * Titanium-Plated Pilot Drill bit
Warm Tips: This Hole Saw Cannot be used for concrete, tiles and stone. Do not forget to use a lubricant so that the bit does not overheat. It can be water or some kind of oil.
Why ASNOMY's TCT Hole Saw Would be your Best Choices?
Captn John
Reviewed in the United States on March 2, 2025
Great Product cut Stainless Steel with ease
Michael R. Parsons
Reviewed in the United States on February 21, 2025
Worked as expected and even better!
Justin
Reviewed in the United States on January 9, 2025
I had 14 holes 2 1/4" diameter to cut through some 10 gauge steel with a hand drill and this hole saw ate them up like it was nothing. Way better than a typical bi metal hole saw and all the carbide tips still look good and ready to cut a bunch more. The steel was standing up so I couldn't use cutting oil very well but it held up to the abuse fine. I don't think anyone will be disappointed with this hole saw.
Richard
Reviewed in the United States on January 22, 2025
I bought one of those hole-saw sets they said would work on metal. They didn’t, but this hole-saw did a great job, in fact I ordered a 3-1/2” one to finish my job. Great hole-saw.
Ancient Technology
Reviewed in the United States on January 22, 2025
Need a hole in your wood house? Buy this one. Put a hole in my walls and floors. Cut through nails and wood with ease. Fast cut with an aggressive blade design that made holes nearly effortless. If you're used to diablo or Milwaukee, this thing a huge upgrade.
Sanders
Reviewed in the United States on January 21, 2025
Feels pretty solid. The plastic cylinder packaging seems a little on the small side. One tooth was broken off and was rattling around the bottom of the cylinder.
okwoodworker
Reviewed in the United States on June 21, 2024
I used this hole saw in a hand drill to put vent holes in a 50-gallon drum burn barrel. The hole saw, center drill bits (2), springs, and allen wrench come in a nice plastic container. When installing the center drill bits, there is a "flat" side that needs to be aligned with the allen set screw. If these are not aligned, the center drill bit will come loose (don't ask me how I know that). I drilled about 13 holes in the barrel which is made sheet metal probably about 1 mm thick. The center drill bit cut through the metal ok -- nothing spectacular but not bad. The hole saw portion worked fine, but unless the saw was entering the metal at a perfect 90-degree angle, like it would when using a drill press, one of the hole saw teeth would catch as it cut completely through the metal and torque the hand drill almost out of my hand. After several holes I was better at keeping the hole saw at the correct angle and mostly avoid this. I ran the drill at a slow speed and used cutting oil, two important tips whenever cutting metal. I noticed a slight slow down (i.e., dulling) on the center drill bit from the first two the last hole, but expect it will continue cut fine for many more holes. The item comes with two center drill bits. The hole saw did not seem to dull over the course of the 13 holes I drilled. I would buy this again for the price and the limited number of times I expect to use it.
RanchMom
Reviewed in the United States on November 14, 2024
Bought this to use for some small cut-in can lights being installed in 26 gauge R-panel. Drilled over 20 holes and didn't even chip one tooth off of the saw. Pre-drilled my pilot holes to keep the saw from catching and it did a great job.
DANIEL SEPULVEDA ARCEGA
Reviewed in Mexico on June 7, 2023
La precisión para perfóralar
ba1
Reviewed in Canada on October 5, 2023
sharp and cuts good, cut 10 holes in steel don't know how long it will last though, pricey name brand not as good as this thing.
gmo
Reviewed in Mexico on March 30, 2022
Buena calidad
Alexander
Reviewed in Canada on October 7, 2022
I needed to cut some AR400 plate steel. these cutters, while not the best quality, did the job. I was able to cut 4 holes at 2" diameter in 3/4" thick steel. Chip evacuation is rather poor, so i had to retract the cutter often to clear chips. And i used plenty of cutting oil to give the cutter a fighting chance. After these four holes, the teeth on the cutter are very worn, and i don't think it will cut one more hole.
Rene A. Dieck H.
Reviewed in Mexico on April 7, 2022
agujere en una placa de acero y funciono muy bien, hice lo mismo en una lamina y se quebró la broca pero trae una de repuesto
Recommended Products
$98.00
$ 48 .99 $48.99