This item far exceeded my expectations! Solid aluminum bar, quality fit and finish. Packed in a custom made foam fitted cardboard box.

Excellent quality. Better than expected. Well constructed and easy to use. Would recommend.

The hold down screws did not fit the track I have, I will be using them in my ttrack of my router table so I had to modify them to fit. Nowhere on the discription does it give the bolt size. Once I modified the hold down screws they work great, no slippage of the material being held…I would recommend them just know you may need to modify or change the screws to fit the track your using.

This T-Track and 2 clamp set is amazing for the price you pay for it!!! The finish is flawless and everything is incredibly well made! This even includes the screws to fasten the T-Track to whatever it is you are making and with it being made of aluminum, you can cut the T-Track with normal woodworking saws. I was a bit skeptical of that, but then tried it on my miter saw and it cut beautifully!!!

The bars were much heavier than I expected. They work great.

heavy duty clamps

These clamps are larger than the Rockler hold down clamps. If you need good heavyduty hold down clamps you really need to look at these. These would be great for jigs and CNC use for large projects. They are well worth the price.

I bought these with the intention of using them on a crosscut sled that I built, thinking they would be the same size as some other blue ones I have. Alas, I should have gone down and verified, because these are larger, and a bit too bulky for use on the sled. Not to worry, I'm going to swipe the blue ones from my CNC and replace them with two of these (I'll just have to cut off the top of the bolts to provide clearance with the gantry). The other four will get used when I add tracks to my miter station and/or build a table for my drill press. Having said all that, these are a good value for the money and will work well, if this is the size you need.

They're easily the size of your hand out stretched, and that's too large for my drill press. They're good quality, just massive.

They work perfectly with the black t-track purchased on Amazon. Arrived on time and well packaged. Finish and screw threads are top notch. I purchased two pairs and I am more than happy.

Worry Not! These clamps will "EXCEED", (ANY & ALL), expectations you may have!And I say this with no reservations! Indeed, I was very pleasantly surprised when I '"very" quickly, received these clamps! (How Fast? Within 24 hours of ordering fast)! So, they must be stocked by Amazon!And these clamps are a "very well thought-out", product as well.They measured (6-3/8") in length. In the center, and for the length of the screws "slot", they are (Exactly), (0.500" thick). This thickness then tapers to (0.375" or 3/8" thick), on both ends.This tells me two things.1) An actual mechanical engineer, "Who knew what he/she was doing", was involved in the design."This taper coincides (very well) with all of the force vectors involved, and as applied, when utilized in this particular clamping geometry". So there is absolutely, no loss in the clamps strength. Just a bit less in the clamps total mass. "Or Weight".2) This company wasn't afraid to put in the thought, extra time, and also the work that is associated with manufacturing a high-quality product! "Milling that tapered profile did not "have" to be done. But I am glad they did this. "For several reasons". (They will perform and work better. As well as being easier to work with)!And at (1.200" inches) wide, not counting the rubber composite end caps. Which (X2). would add (0.182") to the width at, (0.091" inches), wall thickness. Which helps make these are some truly, sturdy clamps!So, (1.382" inches for the total width), or a "touch" over (1-3/8" inches). Which feels quite substantial!The blue anodizing also gets an (A+), as does all of this clamps, "Fit & Finish"! But the wear factor for this anodizing I cannot comment on, as they have only one day's use on them at this time. The hardware that comes with these looks to be "Grade 2", (or better). And all of it is, "Zinc Chromate" plated for non-corrosion.Overall? This set of two clamps at ($17.99) U.S. is a deal. I have other clamps purchased from "Rockler Woodworking" and also "Kreg" which in the online pic's look exactly the same.But if you compare them side by side? Both "Pale" in comparison to these! Because, while both the "Rockler" and also the "Kreg" clamps are quality products. When looking at them in-hand, and not at just pic's online? These are in-fact, the same "type" of clamp. But these are simply better. By "A leap and a bound" better!These? These by comparison, are on "Steroid's", (if you will)!Imagine a chimpanzee at the zoo.And that chimp meeting "King Kong"!It is that kind of difference. And at about (1/3rd) of the pricing, last time I checked. As those other clampswere roughly ($28 and $36) a piece, "respectively"!And these are just ($18) for the two! Hard to go wrong with these at that price-point! I may add a pic or two later to show the basic, physical, differences between brands. But I am currently a bit short on time.I have NO affiliation with this company or any other, by the way. AND, I almost never write such "Glowing" reviews as this one. In fact, "Counting this one? I can only think of two"! Ok, maybe three...And I write "A Lot" of reviews. "Retired"!So, Good Luck!

These Hold Downs are very sturdy and well made. They fit into my T-Track perfectly and bolt down very solid. They lost a star because they are a tiny tad finicky getting into the Track end, not a game changer at all, just as I said, a tad. It comes with a washer, I'm not sure which end of the bolt it is to go on as there could be a small note or simple brief instructions, it's not rocket science using them, but it's how I felt. They matched my blue T-Track, looks cool all in blue.

These clamps are sturdy and nicely finished, but will NOT work out of the box with Kreg AccuCut traks. the bolt shoulder and threads are too wide to slide into the more narrow Kreg track. I used a Dremel and cutting wheel to shave off 1mm of metal from each side of the shoulder and the threads closes to the head of the bolt. They work fine now. If you'd rather not do that, the Kreg KMS7520 Track Clamps can be found on fleabay for about $25, though without Amazon's quick shipping.