Your cart is empty.
Your cart is empty.Product Description
ACBungji 25 FT 3/16" & 1/4" Copper Coated Brake Line Flaring Tool Kit
The Package Includes :
- 1 x Double & Single Flaring Tool Kit For Bake Line in Blow-Molded Case;
- 1 x 25FT 1/4" Copper Coated Brake Lines + 1 x 25FT 3/16" Copper Coated Brake Lines;
- 32 x Brake Line Fittings + 4 x Unions Brake Line Fittings.
Double & Single Flaring Tool Kit For Bake Line in Blow-Molded Case
This Set Includes:
- Flaring Cone x 1;
- Flaring Bar (Flaring Yoke) x 1;
- Tube Cutter x 1 (Apply to 3/16", 1/4",1/8" O.D. tubing) ;
- Adapters x 5 (Apply to 1/2", 3/8", 5/16", 1/14", 3/16 O.D. tubing).
1/4" & 3/16" Copper Coated Brake Lines + 32 Brake line Fittings ＋ 4 Unions Brake Line Fittings
- 1 x 25FT 1/4" Copper Coated Brake Lines;
- 1 x 25FT 3/16" Copper Coated Brake Lines;
- 32 x Brake line Fittings;
- 4 Unions Brake Line Fittings.
Wide Application
- Our 3/16" and 1/4" copper coated brake line and fittings kit is suitable for most hydraulic brake systems, fuel systems, transmission systems and more.
- It is also widely used in industrial, household, domestic and commercial applications (e.g. HVAC, automotive repair, plumbing, home improvement projects, etc.).
Jeremy Diener
Reviewed in the United States on January 10, 2025
Very cool value with double flare!
Dillon
Reviewed in the United States on September 11, 2024
Fixed up a blown rust tube as we are all familiar with, double flair was fun and solid with no leaks. I will probably buy and keep an extra kit for my shelf as backup
Cjirvine
Reviewed in the United States on July 31, 2024
Used it like 6x and everyone turned out pretty good No instructions but a youtube video will help ya out only problem I would have wish they came with at least 2 of the double flare dyes was worried the 3/16 was going to snap off every time I'll buy another dye for backup
Ralph taylor
Reviewed in the United States on June 15, 2024
Works great ,good price and quick delivery..
Customer
Reviewed in the United States on May 25, 2024
I have used several of these Double Flaring tools over the last Half Century or so. This ACBungji Double Flare Set is comparable to my Top Dollar Name Brand Set that I passed down to my Son some fifteen odd years ago, that really says a lot. Double Flares don't crack or split like normal Tube Flares, they are super easy to make with the right Tool like the ACBungji Flaring Tool. The ACBungji 3/16" - 1/2" Copper Coated Brake Line Flaring Tool Set came with plenty of 3/16" and 1/4" Fittings and Tubing which should cover everything I could do with those two sizes for quite some time. I am using 3/16" through 1/2" Metal Line on my Truck. I am rebuilding the Stainless Steel High Pressure Fuel System on my Ford F-550, some of my lines are 1/2", 3/16" and 1/4". The ACBungji Brake Line Flaring Tool is doing them all with no issues whatsoever. I gave the ACBungji Flaring Tool Set a Full Five Stars Across the Board. the Set is, Durable, Easy to Use, Reliable, Makes Perfect Double Flares, and has Wonderful Product Support to Name a Few of Them.
dan
Reviewed in the United States on May 25, 2024
This is a brake line kit. You get two 25 foot copper lines. One 3/16 and one 1/4. Comes with tools to double flare and cut to size. Even comes with fittings. Good to have if need to make a repair or if you want to switch stuff out with the copper line. Can also do single flare for other things like crafts.
bob
Reviewed in the United States on December 22, 2024
Worked as it should but don't think the tooling will last but a few times as I can see it wearing out after a couple of uses
Robert
Reviewed in the United States on November 13, 2024
This one way better than the last one I bought at a Big Chain Auto Parts store. And much! Lower price. And! it did not come with Tubing!!! Also did not come with a Cutter! Tubing is not bad soft enough to bend. Cutter works good for soft tubbing that comes with Kit. I bought the Kit Double Flare tool set WITH 25ft 3/16 and 25ft 1/4 Tubing. So USE with the "Soft" copper coated Line it works good. you may get a little warp in Flare but its normal with this kind of Flaring tool. And when you tighten Nut to the correct fitting. It will compress flare flattens and seals easy. With soft copper. With Steel or Stainless. ehhh, I dont know? Also the Flare black driving or Flaring Pin !WILL STICK IN TUBING! after you set Flare. Theres tricks to get them out with out Breaking Dam Flare pin in tubing. 1 Deburr inside of Tubing after cutting. 2 after you set Flare dont take it out of tool but loosen tool till you can slip a Flathead Screwdriver under bit. retighten tubing and Gently pry off Flare bit. If you break Flaring bit. YOUR GOING TO HAVE A BIG PROBLEM because there only 1 freaking bit per size! You cant buy just a Flare bit. You will have to buy the whole Set again! I know Im the Idiot that did it before. Youtube "how to double Flare Tubing for beginner" YOUR BEST FRIEND. until you do about 10 flares on your own.
Recommended Products