Your cart is empty.
Your cart is empty.Product Description
Joda
Reviewed in the United States on January 28, 2025
Seems to be really high quality alloy. Machined just right so the hub centric spacer snugly fits. Does the job.
Muy buenos, los probé en ruta 4x4 y aguantaron
Reviewed in the United States on January 26, 2025
100% recomendable, lo probé en ruta 4x4 y todo muy bien.
James F.
Reviewed in the United States on September 23, 2024
Perfect offset for 2021 Tacoma
Guy from Calgary
Reviewed in Canada on August 11, 2024
They are just enough to bring the edge of the tire to the edge of the truck. They don't look too aggressive they don't make the tire stick out too much, I have an aggressive Tire with meaty sidewalls and the side walls just ever so slightly stick out. Makes it look right. Handling a significantly better. They fit perfectly.
Sarah
Reviewed in the United States on June 20, 2024
Had these on my truck for a couple months now. I drove from PA to OK (1500 miles) in two days. Zero issues.
Robert B.
Reviewed in the United States on March 27, 2024
Local used spacers were going for $150+, so I decided to buy these instead. Installed 1" spacers on a '23 Toyota Limited with 17x7.5 Sequoia wheels (+15mm offset), 265/70 AT tires, and they push the wheels right to the edge of the splash guards. Nice wider stance, better than the narror 20x7 OEM setup. Used the supplied blue loctite on the spacer nuts, torqued to 90 ft-lbs, anti-seize on the wheel nuts, torqued to goodntite with the cordless impact (also checked at 90 ft-lbs). Hub-centric fitting was perfect, both on the hub and the back of the wheel.
Steven
Reviewed in the United States on April 25, 2024
Very very cheap quality. Not only do they not screw on all the way onto the stud, After only one day after I decided to take them off because of the poor quality, I realized one of the studs were stripped. I didn’t even use an impact driver
Raul
Reviewed in Mexico on August 27, 2023
Excelente producto y cumple con lo que promete, calidad y medidas.
Carey Ross
Reviewed in the United States on December 18, 2023
Bought a new truck and put a 3” lift on it. Couldn’t put bigger tires on the new Tacoma wheels (inset too much) and couldn’t afford new tires AND new wheels!! Left the truck looking a bit funny with the tires inset so much! These spacers put the stock wheels and tires out just enough to look good!
pablo corona
Reviewed in Mexico on July 11, 2022
Exelente calidad
Customer
Reviewed in Canada on January 25, 2022
These seem awesome, went on nice, and the lugs supplied are awesome. Went onto a first gen tundra 4wd
Roberto Herrera
Reviewed in Mexico on January 22, 2022
Lo bien echo
Chelsea
Reviewed in the United States on February 14, 2021
See my attached pics1) These look and feel to be strong and perfectly made as compared with other forged aluminum parts I’ve bought for my car from other companies, like jacking pucks. These appear to be one piece of solid aluminum not multiple pieces as one reviewer stated2) These are hub centric and fit well not sloppy3) The instructions could be better. I suggest watching you tube for installation which is actually simple4) I have not been driving much due to Covid-19 so I’ve only had them about a month and about 25 miles5) highly recommend retorqing after 50 miles just in case. Torque to factory spec for your car and wheel. Use cross pattern to evenly torque them down6) I’m happy with the way they lookCons:1) See pic. One of the studs had messed up threads so I had to ask for replacement which arrived next day. Irritating but no biggie2) Many of the studs were not fully seated. They all eventually seat when you torque them down but this is a little disconcerting and the manufacturer should not send them out this way. Also, while not being fully seated, the nuts are assembled and delivered very tight and I had to use a socket wrench to get them off3) I do feel a little a little more sensitivity or vibration in the steering wheel. Not bad but it seems like small vibration is amplified. Not bad enough to cause a problem but worth mentioning. I believe when you extend the geometry of the wheel mass hanging off the studs, hub and knuckle that additional vibration is likely but I’m not an engineer and I think what I’m feeling, however slight, would be the same from any spacers at any price. This is the price of wheel vanity4) There is a slight rub now when turning wheels full lock - against the mud flaps. I may take the flaps off or reshape themOverall I love the look of my 4RUNNER
Recommended Products