Your cart is empty.
Your cart is empty.Product Description
DaduoRi Diamond Hole Saws With Center Drill Bits-Saved a ton of money For You!
- Very quality product construction!
- Easier to get started on smooth tile surfaces.
- FOR Remodify OR DIY Bathroom, Shower, Faucet Installation Projects.
If you need a really neat hole, look for a diamond hole saw like this with a pilot bit
Glass Tile Hole Saw With a Pilot Pin, NO NEED ANY GUIDES
- Triple-Layer Diamond Coating
- Smooth, Precise, Clean and Fast Cuts Every Time
- Premium Quality Granite Drill Bits
DaduoRi's products can only be packed and shipped after strict quality inspection.
If there is anything you are not satisfied with our products, just simply send a text message and we will help you within 24 hours.
Other hole saw from DaduoRi
If you need to install 4-inch and 6-inch ceiling recessed lights and are concerned about dust and debris flying around, then this hole saw with a dust bowl is your solution. Find it in our store.
Josh
Reviewed in the United States on February 9, 2025
Clean cut, no overheating, easy to use, nice cutting speed, I used a 20V drill and I didn’t even use the full speed to go thru 1/2” cut.I recommend it.
Benjamin B.
Reviewed in the United States on February 6, 2025
The tile saw itself is wonderful. Cut well through two cuts of porcelain. No issues.The center auger is trash. Started smoking and rounded at the start of the second cut. Had to take it out and use wood blocks to keep the saw in place for the cut (much more difficult). If you buy this, just know the auger has extremely limited use.
Elizabeth Wright
Reviewed in the United States on February 18, 2025
Great price and worked extremely well!
Peter Who?
Reviewed in Canada on February 10, 2025
Needed to drill a drain hole in my gf's ceramic planter and this bit did a fantastic job! Remember to use water in the drilling area and the drill di the cutting and don't force it down.
Chuckken
Reviewed in the United States on February 1, 2025
Cut a hole through my granite counter in about 6 minutes using water... counter is 1 1/4 inch thick....saved a bunch of $ ... Home depot wanted 40 bucks for the equivalent cutter...this one 9 bucks!
Unsatisfied customer
Reviewed in the United States on January 25, 2025
This is a great hole saw. I used it to install an instant hot water dispenser for the kitchen sink. I had to cut a 1-3/8" hole in the 1" thick quartz countertop. I followed the directions (keep water on the blade) and it cut perfectly. I stopped the drill every minute or so to drop more water into the cut. I think the hole saw was a great value and I highly recommend it.
Abdugafur Khakimov
Reviewed in the United Arab Emirates on January 10, 2025
I used it for drilling kitchen countertop which is quartz and the drilling was ease
aculphur
Reviewed in the United States on September 2, 2024
The pilot bit was not centered and wobbled, ended up removing it. The bit also wobbled slightly so that the hole was a tiny bit larger than 1 1/4 because of the vibration. That being said, it got the job done and the cut was clean and easy.To keep the bit stable during the initial cut, I used it on a piece of cardboard to drill a hole, then In taped the cardboard to the counter. This worked beautifully to keep the bit centered. I added water during the cut to keep it wet.
ISMAEL JUAREZ
Reviewed in Mexico on March 3, 2024
Trabajo de una forma excelente haciendo un barreno en mármol de 2cms de espesor. Al cien recomendable, no olvidar mantener agua corriendo para que se enfríe.
Brenda
Reviewed in the United States on December 9, 2024
I needed to add a hole in my garage sink for a soap dispenser. The sink is an old porcelain over cast iron sink. I thought I would have to cut the pilot hole with a different drill bit and then use this hole saw. Turns out this went clean through with no issues at all. The pilot bit provided cut right through the porcelain and iron, as did the diamond saw.I'm sure I will have more uses for this saw and it will work well, but I needed this one job done and it worked perfectly. For the price, even if I never use it again, I'm happy.
Kelby
Reviewed in the United States on December 18, 2024
Needed to cut holes for hot water radiators in a property that we put tile floors in. Numerous holes for incoming and outgoing water pipes and held up great. Came in a nice case to keep in it. Price wise is was cheap compared to other tile bits that local stores had plus they didn’t have this specific size. Will definitely buy again when this one gets dull eventually, But it’s still going strong after a lot of usage
Larry MacDonald
Reviewed in Canada on November 3, 2024
I needed something to drill a 7/8" hole in ceramic tile. Using the pilot drill bit was a bit slow, but once the diamond hole saw portion settled in, it cut through the tile nicely. Be sure to remove the pilot bit once the diamond drill portion has started to cut through the surface. Even though it was very low cost, this drill bit works very well.
book fancy
Reviewed in the United Arab Emirates on November 11, 2024
We bought this to make holes on ceramic pots. It does the job well
Recommended Products