Your cart is empty.
Your cart is empty.Specification Type : 250 stems density polyolefin fastener Width: 1" Backing Attachment: Black , pressure sensitive very high bond VHB acrylic adhesive, Designed to bond to metals, glass and high surface engery plastic Operating Temperature: -20°F - 158°F continuous , -20°F - 200° intermittent Features: UV Resistant. Plasticiser Resistant. 3M Dual Lock Reclosable Fastener SJ3560 has a clear acrylic adhesive on the back of a clear polypropylene reclosable fastener with 250 stems per square inch and 0.23 inch engaged thickness. 3M Dual Lock Reclosable Fastener SJ3560 has a closure life of 1,000 times.
カスタマー
Reviewed in Japan on March 1, 2025
様々なベルクロや耐震ジェルを試しましたが、運搬してケースを開けると毎回剥がれてグシャグシャになっていて、いつも鬱になっていました。エフェクターへの無用なキズも怖かったですし。デュアルロックを使ってからは全くその心配がなくなりました。値が張るだけの価値がある、とてつもない優れものです。テープの面積を大きくしすぎると、逆にがっちり固定されすぎて剥がせなくなるので、お気をつけください。
カスタマー
Reviewed in Japan on March 1, 2025
様々なベルクロや耐震ジェルを試しましたが、運搬してケースを開けると毎回剥がれてグシャグシャになっていて、いつも鬱になっていました。エフェクターへの無用なキズも怖かったですし。デュアルロックを使ってからは全くその心配がなくなりました。値が張るだけの価値がある、とてつもない優れものです。テープの面積を大きくしすぎると、逆にがっちり固定されすぎて剥がせなくなるので、お気をつけください。
Customer
Reviewed in Canada on January 9, 2025
Very useful product.
Customer
Reviewed in Canada on January 9, 2025
Very useful product.
Customer
Reviewed in the United States on January 28, 2025
These really lock down my guitar pedals to my pedal board. Love it!
Customer
Reviewed in the United States on January 28, 2025
These really lock down my guitar pedals to my pedal board. Love it!
Steve Held
Reviewed in the United States on January 18, 2025
Super contact. This stuff makes regular Velcro look like scotch tape.
Steve Held
Reviewed in the United States on January 18, 2025
Super contact. This stuff makes regular Velcro look like scotch tape.
DAVID TARRANT
Reviewed in the United States on August 4, 2024
Really works as well as described
DAVID TARRANT
Reviewed in the United States on August 4, 2024
Really works as well as described
Customer
Reviewed in Canada on July 14, 2024
Used it to secure a power supply to a pedalboard, that thing ain’t going anywhere
Customer
Reviewed in Canada on July 14, 2024
Used it to secure a power supply to a pedalboard, that thing ain’t going anywhere
Kirk Dickinson
Reviewed in the United States on May 10, 2024
I have ordered a lot of this over the years. Don't mess around with the lesser junk. Pitch the velcro in the trash. 3M Scotch brand Dual Lock is the best there is. In the past using velcro, I have opened my case for my pedal boards on a warm day and all the adhesive had come off and I had a sticky mess. Not with the Scotch dual lock. Adhesive is great.Not sure why there is a "Remote Control" for this item. Nope, no remote control. Doesn't make sense. I gave that feature a 1 star.
Kirk Dickinson
Reviewed in the United States on May 10, 2024
I have ordered a lot of this over the years. Don't mess around with the lesser junk. Pitch the velcro in the trash. 3M Scotch brand Dual Lock is the best there is. In the past using velcro, I have opened my case for my pedal boards on a warm day and all the adhesive had come off and I had a sticky mess. Not with the Scotch dual lock. Adhesive is great.Not sure why there is a "Remote Control" for this item. Nope, no remote control. Doesn't make sense. I gave that feature a 1 star.
Raymond
Reviewed in the United States on December 9, 2024
If you want something to stay put, this is what you need. I keep this stuff on hand, not because I use it all the time, but when I want something locked down (but removeable, with effort), this is my go-to. The uses are many... I use it mostly for automotive purposes, usually to mount small component type stuff. The last application was for a ScanGauge 3 in my Tundra, which I had fabbed a bracket for. The gauge did not come with a bracket or mounting, so I did my own. A small piece of this, and the ScanGauge is securely fastened onto my bracket and doesn't flop around or fall. If I want it off, then I'll earn it, I'm sure.Good stuff.
Raymond
Reviewed in the United States on December 9, 2024
If you want something to stay put, this is what you need. I keep this stuff on hand, not because I use it all the time, but when I want something locked down (but removeable, with effort), this is my go-to. The uses are many... I use it mostly for automotive purposes, usually to mount small component type stuff. The last application was for a ScanGauge 3 in my Tundra, which I had fabbed a bracket for. The gauge did not come with a bracket or mounting, so I did my own. A small piece of this, and the ScanGauge is securely fastened onto my bracket and doesn't flop around or fall. If I want it off, then I'll earn it, I'm sure.Good stuff.
Warren L.
Reviewed in the United States on July 30, 2023
Very impressed with this stuff. It really “locks” in with a click. Shame it’s so expensive but it is great for my pedal board and because I mount my pedals on a high incline (it’s like a dumb modular synth setup) the adhesive being stronger than industrial strength Velcro was important. Over a few months’ time, the backing glue would come off of particularly heavy pedals like a Boss MD-200 or Strymon BigSky and I’d have to use new Velcro. That shouldn’t be happening with this stuff.
Warren L.
Reviewed in the United States on July 30, 2023
Very impressed with this stuff. It really “locks” in with a click. Shame it’s so expensive but it is great for my pedal board and because I mount my pedals on a high incline (it’s like a dumb modular synth setup) the adhesive being stronger than industrial strength Velcro was important. Over a few months’ time, the backing glue would come off of particularly heavy pedals like a Boss MD-200 or Strymon BigSky and I’d have to use new Velcro. That shouldn’t be happening with this stuff.
カスタマー
Reviewed in Japan on November 28, 2022
オスメスがなく、ガッチリ止まる優れもの毛のめくれ等が一切発生しないからイイ
カスタマー
Reviewed in Japan on November 28, 2022
オスメスがなく、ガッチリ止まる優れもの毛のめくれ等が一切発生しないからイイ
HJW0045
Reviewed in the United States on September 20, 2020
Used for PedalTrain Classic I board, mostly Boss pedals and a wah. Would like to see the low profile clear tape compared to this; the thickness profile isn’t too bad actually, but I could see thinner being a little better as the pedals wouldn’t be as high (we’re talking fractions of an inch, tiny). Was able to pick up the entire board by one single attached pedal but it’s not as strong as you’re thinking. The product’s reliability is much increased after cleaning surfaces with alcohol prior to applying adhesive strip, not pressing two strips together too hard (it can weaken the DualLock hooks), and being mindful of how much you need to use in order to achieve the degree of “locking” you’re after. Holds all my pedals and wah in place — very solid and firm. Used about 16’ of Dual Lock to cover the entire Classic I so I had to buy 2x rolls. Probably worth it because I won’t need to replace any Velcro ever again hopefully, plus this stuff is very strong. I’m glad I did my research and chose DualLock, no wonder everyone recommends it for pedal boards!
HJW0045
Reviewed in the United States on September 20, 2020
Used for PedalTrain Classic I board, mostly Boss pedals and a wah. Would like to see the low profile clear tape compared to this; the thickness profile isn’t too bad actually, but I could see thinner being a little better as the pedals wouldn’t be as high (we’re talking fractions of an inch, tiny). Was able to pick up the entire board by one single attached pedal but it’s not as strong as you’re thinking. The product’s reliability is much increased after cleaning surfaces with alcohol prior to applying adhesive strip, not pressing two strips together too hard (it can weaken the DualLock hooks), and being mindful of how much you need to use in order to achieve the degree of “locking” you’re after. Holds all my pedals and wah in place — very solid and firm. Used about 16’ of Dual Lock to cover the entire Classic I so I had to buy 2x rolls. Probably worth it because I won’t need to replace any Velcro ever again hopefully, plus this stuff is very strong. I’m glad I did my research and chose DualLock, no wonder everyone recommends it for pedal boards!
Theresa PRATT
Reviewed in the United States on March 17, 2020
i love that it mates to itself instead of a male and female type of velcro if you will. and the backing film that protects the adhesive comes off nice and easy, i've used other velcro that you really fight to pull the backing off and end up ruining the velcro sometimes. the adhesive is also nice and strong. i have things mounted on the under side of the roof of my sxs for a couple of months now and hit 80+ regularly with no issues, i can also yank the items down and pop them right back up. i have a rechargeable light and a few other things mounted so this product really fits the bill
Theresa PRATT
Reviewed in the United States on March 17, 2020
i love that it mates to itself instead of a male and female type of velcro if you will. and the backing film that protects the adhesive comes off nice and easy, i've used other velcro that you really fight to pull the backing off and end up ruining the velcro sometimes. the adhesive is also nice and strong. i have things mounted on the under side of the roof of my sxs for a couple of months now and hit 80+ regularly with no issues, i can also yank the items down and pop them right back up. i have a rechargeable light and a few other things mounted so this product really fits the bill
Federico
Reviewed in Italy on November 17, 2019
ottimo come da descrizione
Federico
Reviewed in Italy on November 17, 2019
ottimo come da descrizione
Recommended Products
