Your cart is empty.
Your cart is empty.Product Description
3M Dual Lock Low Profile Reclosable fastener.. TB4570 is a low surface energy adhesive on the back of a clear polypropylene Reclosable fastener.. This product is half the thickness of standard 3M Dual Lock Reclosable Fasteners, providing a low profile attachment. An alternative to screws and bolts, this hidden fastener provides a snug fit and smooth aesthetic appearance.
From the Manufacturer
A low surface energy adhesive on the back of a clear polypropylene reclosable fastener. Low profile. 0.10 inch engaged thickness. Closure life 100.
Ashlee s.
Reviewed in the United States on July 14, 2024
Use it for my crafts and I love it super strong hold
Brian
Reviewed in the United States on May 7, 2024
I used this to adhere boat flooring. Even with the felt backing, this stuff stuck and provided a secure connection. Great product!
Charz
Reviewed in the United States on March 4, 2024
Love this product. I only wish the cost was a little lower. I have purchased multiple times and will continue to do so.
Jalyn
Reviewed in the United States on January 15, 2024
Works great and is very sturdy. I use it to hold my resin badge toppers for my badge at work. And they have never popped off or anything it holds very well
Miryam
Reviewed in Mexico on July 31, 2023
Muy resistente y de buena calidad, agarra muy bien, perfecto para lo que lo quería en mi auto, a pesar de el movimiento y vibración no se despega.
David C
Reviewed in the United States on November 27, 2023
Was easy to measure and cut for using on my guitar effects pedal board. I put strips on the bottom of each pedal then pieces all the way across the slats on the board. I’ve repositioned a few and they take a bit of a tug to get them off, and I’ve only done it a few times but there seems to be no indication of losing grip.This is the low profile stuff, so there isn’t a lot of bulk under the pedals. I think it’s sufficient, if I kicked a pedal hard enough to remove it from the board I’d likely break my foot or the pedal.I have a fairly large board and bought 2 rolls, I still have at least half of the 2nd roll left and have been looking for other things to use it on. So far I haven’t found any, but I think the desire to use it is a review of its own… it’s a product I actually want to use.I can’t speak for the longevity or repeated sticking and peeling, but it’s working great for me so far.
mando man
Reviewed in the United States on May 26, 2021
Beats Velcro for most applications... only one type of material so it always mates, positive locking when you push down on it, very strong. Used on a guitar pedal board, when you push down the pedal, it gives a satisfying "thonk" when it seats, and it holds tight. I'd recommend only using a small square in each corner of the thing you want to affix, if you intend to get it back up. A lot of square inches and you have to push really hard to get it to seat, and when it does, it does not want to let go.
Cliente de
Reviewed in Mexico on September 13, 2019
Es el ofrecido por el proveedor de acuerdo a las especificaciones mostradas en la pagina de Amazon
rbgiantfan
Reviewed in the United States on August 6, 2019
I've always been a fan of 3m dual lock fasteners because they really hold well and don't seems to wear out. I had been using them on my last pedal board but I didn't like the way they raised the pedals up from the board. That's why I bought this low profile version for my new board. The clear is almost invisible and it is indeed much thinner than regular dual locks. Obviously they don't hold as well as the full thickness ones but they seem adequate for a pedal board. I wouldn't recommend using the low profile ones for mounting something completely upside down, like on the ceiling but I am pretty confident they would hold a pedal at 90 degrees, like on a wall (not that I would ever do that !).I am glad I chose this for my new board, but I wish it was a little less expensive.
Tim Flath
Reviewed in Canada on May 16, 2019
We use this stuff on our yacht - works better than velcro when you require a fastener that needs to be done up repetitively. Velcro frays badly when used too many times. This stuff simply works great
Tom F.
Reviewed in Canada on April 3, 2019
Bought this to secure my portable audio dac/amp to my phone. Totally works in this application, and very secure. It takes a good amount of force to remove it when I want to take it off of my phone case. A bit pricey (I paid about $30 for 10ft) but it often goes on sale for less. Very satisfied!
claire
Reviewed in the United States on October 3, 2016
I couldn't find two long strips of velcro for some reason, so I go this as a substitute. What I took for granted in velcro is that velcro is "stick and go". When something is velcro, all you gotta do is get the two sides to touch and boom, theyre stuck pretty nicely. This type of fastener needs to be "clicked" into place. You cant just touch the two sides and walk away. You need that extra push to get it to fasten together. Also, velcro seems to hold up a lot better than this. I use this to fasten two remotes back to back for our surround sound system and the TV itself (both remotes are pretty small). With velcro before, the two remotes didnt come apart if you threw them on the couch or dropped them on the ground. With this stuff, the remotes sometimes do separate if you toss them on the couch and definitely separate when you drop them on the ground. Now that could be do to not pressing them together tight enough, but that in itself was my first concern anyway. With velcro, I just touch the two remotes together and Im good. With these, I gotta give a good press to lock them in, and even then, they sometimes come apart. Im too lazy to switch it out with velcro and I dont think I can return it since I already cut strips off, but like I said. It does work. Its just not as good as velcro.
Judas
Reviewed in Germany on February 14, 2013
Nutze dieses Tape um diverse Dinge wie z.B.: "große Bilder, Whiteboard, Kopfteil (Bett 140cm x 30cm, Holz mit schaumstoff und Leder-Bezug)" etc. an meiner Raufasertapete zu befestigen.Alles haftet zuverlässig; man muss sich lediglich an die Montageanleitung halten.Habe sogar Dinge umgehängt. D.h. Bild o.ä. von der Wand nehmen; Tape von der Tapete losen (erstaunlicherweise löst sich ausschließlich etwas Farbe, welche am Tape kleben bleibt, ab; die Wand ist weterhin weiß); Neuen Klebestreifen zurechtschneiden, aufkleben, 24h warten und dann den auszuhängenden Gegenstand aufhängen.
Recommended Products
