Your cart is empty.
Your cart is empty.Product Description
Klaus F.
Reviewed in the United States on February 17, 2025
Having had a lot of experience with these plates it really is a shot in the dark if one will work right off the bat with minimal cleaning and this was no exception. I had to scrub this with soap and water about 5-6 times per side and even after that when I rubbed it with 90% IPA there was a wax like coating on it that was easily visible. I have no idea what that was but it took me a long time to get it to adhere any type of first layer.I will say that regular PLA worked fine after that but silk PLA still will not go down very good. I tried different silk PLA settings on things that normally print fine but still I am not confident to start a print and leave it unattended. This was even with different silk PLA rolls.I would say try at your own risk. Not really a fan although it does impart the pattern to the print. Your luck may be better than mine.
barrett
Reviewed in the United States on January 14, 2025
The media could not be loaded.
NCS
Reviewed in the United States on December 5, 2024
The Jusnboir Bambu Lab 3D Printer Build Plate Double Sided Textured PEI Sheet is a great addition to the Bambu P1S family of printers. It's a great fit on the magnetic plate.Like most new plates you are going to want to wash with warm water and dish soap to start with a clean plate.The other must-do when you add a new plate, make sure you run a bed leveling on your first print. Many of these prints are slightly different thickness and it doesn't take much difference for a successful or a botched print.Adhesion has been the same as original textured PEI plate. Biggest difference is the double sides have texture/patterns on these. So I nice change when you need it and also gives you an additional plate.Another stated: 2. Prints exhibit enhanced adherence during the printing process, effectively mitigating the risk of failures., I would say that I have not run into adhesion issues with this so I am not disputing what they said.And like most of these print plates, when the platform cools down, the removal of prints is done with relative ease.If you're looking for an additional print plate and want some design options, this is certainly a good choice.
Steve Lucas
Reviewed in the United States on December 14, 2024
Nothing quite like a new fresh build plate to re-invigorate your printing. Started having some prints release before printing was done so I figured it was time to change my plate. This thing works like a champ and holds the prints nice and tight when you want it and releases nice and easy once cooled off. It’s a good upgrade for your Bambu. Works great, would buy again.
Carlex
Reviewed in the United States on November 19, 2024
Want to say how pleasantly surprised i am with this build plate. I've had a mixed bag of experience with non-oem build plates. This is one of the very good ones. Everything sticks just like my BL textured PEI plate. With the plus side of the awesome design that it gives you. Easy to clean, just use some IPA 70-99 and you are good to go.
Dan
Reviewed in the United States on October 24, 2024
I really like how this plate looks. It has a nice engraving showing the supported filaments, and it perfectly matches my Bambu P1S, working smoothly right out of the box. The plate has two different textures, but you’ll only notice them on very flat figures. I’ve attached an example in the third picture, but for most prints, it will look completely flat.It feels solid, not cheap, and seems like it will last a while.
Dave W.
Reviewed in the United States on October 22, 2024
This build platform represents a valuable enhancement for my printer.1. Its dual-sided texture offers versatile adhesion options.2. Prints exhibit enhanced adherence during the printing process, effectively mitigating the risk of failures.3. Once the platform cools, the removal of prints is accomplished with ease.Overall, I express my utmost satisfaction with the exceptional quality and performance of this build platform.This awesome buildplate is a worthwhile investment for any printer owner like me.
Norm D’Gear
Reviewed in the United States on October 21, 2024
This plate is identical to the stock plate until very close inspection. Geometric textures are embossed on both sides and they leave a subtle imprint on the bottom surface. It has a code in the same location as the stock plate, but X1C does not recognize it. There are instructions on how to disable a check for it. Adhesion with PLA and PETG seems the same as the stock plate. If the bottom pattern is important or your stock plate is wearing out, this is a good choice for an improvement or replacement.
Recommended Products