Your cart is empty.
Your cart is empty.Product Description
MarcusXL
Reviewed in the United States on February 8, 2025
I am having total success with this product but I must mention when installing into the A1 Mini it is just slightly snug!It puts just a little pressure on the clip that holds it in, so I can see after many hot end swaps you may need to replace the clips / heater from the added metal fatigue. Well that's not too hard to do and it's a $20 part but be careful with those clips!
A man called J
Reviewed in the United States on February 7, 2025
Works as well as babmu's official nozzles.
CARL A LAMB
Reviewed in the United Kingdom on February 20, 2025
I’m not usually the one to buy aftermarket parts but by the time the manufacturer sends it from America I thought I’d give him a try just as a back up truthfully guys I can’t fault this product. I bought a couple the spares and back up and they were perfectly is not better than the originals worth the money value for money. I would highly recommend this. I have a Bambu A1
Average Family Parent
Reviewed in the United States on February 18, 2025
Bambu nozzles are on back order. These came within a couple of days. Fit just like the original. I ended up printing for about 12 hours the first day and about 10 the next no problem. So far no issues. We like to print small things and we do print multiple color things with AMS.
Stewart
Reviewed in the United States on February 18, 2025
Absolute garbage. Clogged after 4 hours of printing. Luckily my Bambu nozzle was free on my other printer so I could swap it out and finish the job. Stick with Bambu. Returning for sure.
Michael S. Anderburg
Reviewed in the United States on February 16, 2025
Every bit as good as Bambu nozzles. Only issue is that there isn't a setting for a non-stainless 0.2 nozzle. So far every print has been perfect though.
LAVANDIER DIDIER
Reviewed in France on January 29, 2025
Buse 0,2 en acier trempé de qualite
Walesa
Reviewed in Italy on January 22, 2025
Ottimo estrusione, dopo ore di utilizzo non ho trovato problemi. Facile smontarlo e montarlo nella bambulab.
Z. Soulantzos
Reviewed in the United States on January 21, 2025
60mm tall model. Bambu A1 mini, .08 layer, .2 nozzle, ultra fine settings. 12 hour print.I would definitely recommend this nozzle. It gets the job done.
Melanie
Reviewed in Germany on December 8, 2024
Habe dieses Hotend als Alternative zum Original Bambulab Hotend bestellt und bin sehr zufrieden.Ich habe mir ein Hotend mit 0.6er Düse aus gehärtetem Stahl ausgesucht weil ich Carbon gefülltes Material verarbeiten möchte. Ich bin vom Ergebnis begeistert was dieses Hotend macht. Es passt hervorragend in den Bambulab drucker und macht einen guten soliden Eindruck.
Bo Dockx
Reviewed in Belgium on November 17, 2024
Very good printer head, my print are very detailed now.I print with a Bambu Lab A1 Mini
Kevin
Reviewed in the United States on October 24, 2024
quick easy change out. prints well
C & L
Reviewed in the United States on October 20, 2024
I recently got my A1 mini and I am trying to get the most out of it.I was watching some videos online and I heard that this printer was really good to print minis with a quality comparable to that of resin printers. I have absolutely seen the quality of resin printers and I know it is very high with no layer lines and extremely smooth prints but, I also know that there are many extra steps involved in getting a print from it and that it is a lot simpler to work with FDM printers, so I decided to give it a go. The video indicated you would get much better results with a 0.2 nozzle, so I started to shop around and found this one. As usual, I like to order from Amazon a lot better than ordering from Bambu due to the extra fast shipping and customer service. This hotend is very good quality and made of hardened steel which, checking the Bambu page, you cannot order from them as they only have regular stainless steel 0.2 mm hotend. This one also has the option to replace the nozzle without the need to replace the entire hotend. I don't particular like that feature as it appears to me that Bambu Labs made it super easy to change the hotend where you don't even need any tools, so I am not planning to replace the nozzle on this one, but it is good to know I have the option if I wanted to.Anyways, I followed some instructions I found online, changed some settings on the slicer and printed the miniatures you see on the pictures at 0.08-layer height, and I am extremely pleased with the results. I am just starting to test it, but I think the results I have obtained already are very promising. No issues printing, no clogs or anything. I would definitely recommend it.
Recommended Products