Your cart is empty.
Your cart is empty.Product Description
Bert
Reviewed in the United States on February 10, 2025
This works great for my Dell Desktop. If your PC has the power and SATA connections, you could mount up to 4 SSDs. I needed to add 2 SSD's. Both brackets allow 2 SSD's each. They can be stacked. Each bracket can be installed (or replace) a 3.5" drive. I removed two 3.5" HDDs and added both brackets to my Dell XPS desktop. I have 2 new 2.5" SSDs installed on one bracket. The remaining bracket will allow me to add 2 more SSDs if I want. The only negative is the lower SSD is harder to install because you need to attach the side screws thru holes in the side brackets. Make sure you have a long reach magnetic srewdriver. It is doable but can be time cnsuming and a bit frustrating. It would help if they had made the holes a bit bigger and slotted them.
DB
Reviewed in the United States on February 1, 2025
This mount is what I needed to mount all the ssd drives into the space available. I'm building a raid array and needed more ssds than drive slots available. Doubling the drive slots did the trick!
J F Seattle
Reviewed in the United States on January 24, 2025
This is a simple, easy to use SSD mounting bracket and hardware kit from Eluteng.The kit includes two metal brackets for mounting two 2.5" drives in one 3.5" drive location. The brackets rely on using side-mount screws for the 2.5" drives and the 3.5" drive location, which might be an issue with some case drive cages that have 3.5" drives mount using the bottom screw locations.The kit also includes screws, a small screwdriver, power Y splitters to feed SATA power from either a SATA power source or a 4 pin MOLEX source. The provided SATA data cables are slightly different than what's in the product photo, since it's not a pair of identical, straight-feeding cables and is instead one straight cable and one cable with a 90 degree angle on the one connector. It's a slight mismatch to have two brackets (capable of mounting 4 2.5" drives) and only having 2 data cables in the set, but if you need just 2 cables you're set.This whole kit for just $10 is a pretty decent value too.
Rover100
Reviewed in the United States on January 20, 2025
Arrived well-packaged and in excellent condition These work great as you can install two SSD drives in the space normally taken up by one drive bay. Easy to install and comes with the screws and cables needed for most computers.
Susan C.
Reviewed in the United States on August 14, 2024
I used this 2.5" to 3.5" adapter to mount Crucial 1TB SSDs (2) into the drive cage of an HP-Envy Desktop h8-1540t. The shouldered drive screws provided worked fine to attach the SSDs (the exiting hard drive mounting screws were too large). The flat head screws used to mount the adapter to the drive cage were fine, but the metal of the adapter is so thin, that the screws easily strip when installing. Weld Nuts are needed. I got 3 out of 4 with each SSD (did not stack the SSDs (note one would need straight at SSD SATA 3 connectors). I put blue painters 3M tape over the stripped screws to keep them in place, and used the adapter anyway. In the future I will research better and find a more substantial adapter (that or one with weld nuts).Note: I lost a lot of time trying to remove the L SATA III connectors on the existing hard drives. To the side of some connectors (like mine) there is a gap. One had to push a small Jewler's flat blade screwdriver into this slot to push that catch that is on the SATA III connector over, to allow the connector to be removed. Comes out very easily when done this way. Will NOT come out otherwise, you will break the connector on the drive.
Friagram
Reviewed in the United States on December 7, 2024
I used these to add storage to a thin client. Some of the screw holes needed to be threaded by forcing a screw through, but everything worked out in the end. There were a lot of extra screws provided.This allows me to add up to 4 more drives. I initially installed one, but added two others during black Friday sale. There is enough space so that SSDs don't overheat. Mounted externally they are staying around 35-42 degrees.
Kyle Haendel
Reviewed in the United States on December 30, 2024
Just what I needed.
Layton T. Webb
Reviewed in the United States on December 29, 2024
great price and fast shipping
Recommended Products