Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #76,041 in Arts, Crafts & Sewing (See Top 100 in Arts, Crafts & Sewing)
- #83 in Sculpture Modeling Compounds
Product Description
Barb W
Reviewed in the United States on March 1, 2025
I really like the concept of these moldable beads, but the “cons” are that it is VERY hot and sticky (even wearing disposable gloves), and it left some kind of weird film in my pan that I can’t get out. Grrrr. I used these for making a mold out of a metal stamp. It did work very well for that.
kibrenner
Reviewed in the United States on February 19, 2025
These pellets are a great addition to my crafting supplies. They are also handy for repairing plastic or poly items that have broken. They can be used to create molds for clay or resin, and since you can just remelt your mistakes, it's a good way to learn modeling.
Sara
Reviewed in the United States on February 18, 2025
I've walked by these in the store and have seen them online for years. Well, I finally gave in to try it out! The directions are very simple. Add beads to a non-plastic container that will not shatter with heat. I used a small Pyrex bowl. Boil water, add it to the beads in the bowl, wait until they turn clear!I waited and then used a spoon to try to remove the clump. It wasn't as easy as I was anticipating. The plastic was very hot (because it was in boiling water, lol). This is why I don't think this would be good for younger children or those with sensitive hands. There was quite a bit of molding time out of the water. I haven't made anything of note, so I just put it back in the bag. I would imagine cold water would set the plastic up faster. Google is going to help me out with ideas and inspiration.Some of the plastic did stick to my metal spoon and in the bowl. I managed to pick most of it off, but there was a tiny bit that was difficult to remove. This was the only qualm I had beside the temperature of the material. As for the plastic, when it hardens, it is solid. However, I could see pieces shattering if dropped or hit with a hammer. This could leave sharp edges and pieces.I do like the fact this can be remoulded. If you are using it for something functional, make sure to do a stress test first. Preteens should proceed with caution and assistance. Teens and adults should just know (again) that the material can be extremely hot. The plastic is almost too fluid to mould right away (unless pouring it in a mould, which is neat), so you could try adding cold water a little bit at a time. I'm still learning as I go, too. I'm not sure what could be done about releasing the plastic from a mould. I may give it a try if I can find a small mould.
Belouise G
Reviewed in the United States on February 14, 2025
I got these for a cosplay costume and to just have in my artsy/crafty arsenal...so happy that I did! They are simple to use and I especially like having the instructions right on the bag. Excited for all the possibilities that this moldable plastic unlocks!
Customer
Reviewed in the United States on February 1, 2025
I recently tried the 1 LB Polymorph Moldable Plastic Beads for a few DIY projects, and I have to say, I’m really impressed! These beads are so easy to use. All you have to do is heat them up in hot water (around 140°F), and they melt down into a soft, moldable consistency that’s perfect for shaping by hand or using molds.I’ve used them for everything from small repairs to crafting custom miniatures, and the results are fantastic. Once the plastic cools, it hardens into a durable and sturdy form, and you can even re-melt it and reuse it for different projects, which is a huge bonus for me.The best part is how versatile they are. Whether you’re making cosplay props, creating custom parts, or just getting creative with some fun crafts, these beads are perfect for it all. Plus, it’s non-toxic and safe to use, which is great for peace of mind when handling them.Overall, I highly recommend the 1 LB Polymorph Moldable Plastic Beads for anyone who loves DIY projects or crafting. They’re easy to work with, super versatile, and offer endless creative possibilities!
Jay S
Reviewed in the United States on January 21, 2025
This is a bag of 1+ lbs (they appear to give you 10% extra to account for loss to sticking to utensils/pots, etc) bag of small beads of white plastic. If you pour them into near boiling water they turn transparent and get sticky. They stick to themselves the most, but they also left plastic residue on the bottom of my pot and on the metal spoon I used to mix and pull them out of the very hot water.The instructions say to smush them together to force out water, and then dry them on a towel. NOTE: A paper towel won't work well, as it gets stuck and you get paper in your plastic, or plastic on the paper towel. I'd recommend a piece of woven cloth without any "threads" or "fuzz" sticking out, so more of a cloth than a towel. Even then, don't let it touch anything you are not willing to dedicate to crafting, as you may not be able to get all the plastic off.The directions say to NOT use plastic pots or utensils as the hot plastic sticks to plastic very well. [It stuck to metal OK.]Once I had the clear plastic free of the water and slightly cooled down, I could mold and shape it by hand, much like modeling clay. I was surprized by the amount of working time I had. Even after being out of the water for 5 minutes I could still shape/mold it, and it took a good 10-20 minutes before I was confident it would hold it's own shape under gravity.When fully cooled/cured, it is strong, but still slightly flexible. If you put enough force into it you can bend/deform it, but not easily. I used it to make a "thumbscrew" for a 5/16th nut, and it took a LOT of torque before I could get the nut to "slip" inside the hex shaped hole of the thumbscrew handle. More flexible than ABS, but much less flexible than silicone or cooled hot glue.One nice feature is that as long as you haven't gotten the plastic "stuck" to something, or contaminated with oil/dirt/paint, etc....you can throw it back into hot water and re-use any mistakes or parts you no longer need.It definitely needs parental supervision for the heating step (when it first comes out of the water there is a danger of it sticking to skin and burning) but once the plastic has cooled down for a minute, it would be safe to hand off to a kid and let them mold it by hand.It has less working time than air-dry clay, but sets up much faster, and makes a less brittle final product. Overall I'm impressed with this material. Your only real limitations are your artistic / clay forming abilities. The better you are at sculpting, the nicer your results will look. [My thumbscrew, while perfectly functional, looked like it was made by a 5 year old with play doh.]
Recommended Products