Your cart is empty.
Your cart is empty.Product Description
How to use it correctly?
Thoughtful security protection design!!!
- Safety Gopper Pipe
- Front Lighting Design
- Handheld Switch Design
- Easy to Use
- Note: Works with most thicker plastics. Too thin plastic may not withstand the temperatures of a plastic soldering kit.
Jorge Gavino Tanamachi
Reviewed in Mexico on February 9, 2025
Está muy bien. Pero me llegó sin las palitas de aplanado
Customer
Reviewed in the United States on February 4, 2025
Used this plastic welder for grandsons fourWheeler when he had a slight mishap with the fender causing a tear in the plastic. He is 13 and was able to use it himself. So far repair is holding up nicely
John Green
Reviewed in the United States on February 23, 2025
Quality kit. If you repair broken plastic parts you need one of these.
Jerry G
Reviewed in Canada on February 10, 2025
Works great, used it to repair a fridge/freezer drawer that was discontinued.
Dan
Reviewed in the United States on January 7, 2025
Bought a ride that had a crack in the fender just starting. 3 of these staples kept it from spreading. Fast and easy to use.
Parker O.
Reviewed in the United States on January 31, 2025
This thing works magic on bumpers and any broken plastics, I have patched up two bumpers now and it is just amazing how easy it is to use and how effective it works. It makes me feel like a surgeon as I "stitch" bumpers back together in seconds.
Ilmar Saar
Reviewed in the United States on January 26, 2025
This product is misleadingly advertised as 150W. In reality, the hot staples operate at a maximum of 35W, and the hot knife peaks at 79W. The manual confirms the maximum current draw is only 0.5 amps, equating to 60W. Staples heat up within seconds, so the wattage seems appropriate for that function.However, the cutting performance leaves much to be desired. While cutting starts adequately fast, it slows considerably after just a few inches, even when the current draw remains above 75W. Strangely, the heat doesn't seem to transfer effectively to the tip, leaving it unclear where the energy is going.
GatorFan
Reviewed in the United States on June 23, 2024
In my opinion, it's a good value, pretty sturdy, and works well. I used it to repair cracked vehicle trim pieces that are difficult to find.
R. Jackson
Reviewed in the United States on November 9, 2024
Remarkably fast heat up -within only 2-3 seconds. Works amazingly well, and very simple. Pins slide in and out easily and clip cleanly with appropriate side snips. Was reserved this wouldn't work well but it does and it's a wonderful addition that I wished I would've bought years ago. Certainly recommend this.
Raimon
Reviewed in Mexico on August 8, 2023
Funciona al 100%, calienta rapido y solda muy bien
Air cooled addict
Reviewed in Canada on August 13, 2023
I bought this to repair my car bumper and assorted broken pieces from the unfortunate “Dukes of Hazzard” incident when I accidentally jumped my car. Fortunately the bumper was only cracked on the underside, although a fairly big chunk was missing along with some mounting tabs. Just to see if I could, I joined some scrap ABS plastic to the polyurethane of the bumper using the supplied wavy staples. I made two mounting tabs as well as a piece to bridge the gap that been torn out. This unit worked quickly and flawlessly. It almost worked too well, you have to be cognizant of the thickness of your piece, I almost burned through on one spot. The supplied staples are good, but it’s impossible to supply a staple for every possible scenario. Luckily some needle nose pliers and careful bending created the right profiles. The repair was nice and solid, we’ll see how long it lasts. Like it says in the manual be careful to leave the gun in place after releasing the trigger, the material needs to set up. Be careful also when clipping the ends of the staples with the provided side cutters, they shoot off at somewhere between the speed of sound and Warp 3. One ricocheted off of my forearm, making a wound that bled profusely. I just rubbed some dirt on it and kept going.It’s already paid for itself. I’m confident that I’ll get allot more use out of it. Oh yeah, when the other reviews say the included case is flimsy and cheap, they aren’t exaggerating. It’s so weak I’ll probably have to use the gun to weld it back together. I’m not sure if that’s a problem or an opportunity?
Sqweezel
Reviewed in the United States on August 12, 2023
Someone broke a piece of the rear-right fender off of our UTV at work ( A Kubota RTV500 ).I saved the piece, and bought this tool to see if I could fix it.One tiny triangular chunk was lost for good, but, I did manage to try this tool for the first time.I had never used a tool like this before, and was unsure of it.All I could think was, "This is going to be one of those, "NAILED IT!" before and after shots, I know it" Because I didn't believe the tool would work so well for being so inexpensive.Again, I have NEVER done this kind of repair before with a tool like this at all.It was so simple and easy to use... I was, very impressed.For a first time ever touching this type of tool, I think it came out really well.I have included the photos I took while doing the work, and it only took me about 25-30 minutes, literally did this on my lunch break at work...I recommend watching a youtube video on this tools operation, to be sure it is something you think you can do.Also, here is a tip, press the "staple" against the plastic first and pull the trigger, don't just heat it up in the air n stick it in there.The tool heats up fast, but not too fast to use properly. This wattage, (150W) is PERFECT. Any less and it would have been super slow and annoying to use, any MORE and it would be TOO fast to use.Once you get the ends snipped off (I used flush cutters because the wire cutters it comes with leave WAY too much of the staple sticking out) then I hit the ends with a grinding stone on a Dremel tool and it was fine, I didn't have sand paper to make it look pretty but despite this, it came out rather well for a first time ever use.If you have an ATV, or any vehicle that has a broken bumper, rather than frankenstein-ing it with pop rivets a sheet of metal, or epoxy, or plastic adhesives, TRY THIS.This tool sets hot wire into the material, LOCKING it in place, and once you smooth it over with the flat spatula end, (Which you can bend to a usable curve shape or any shape you need it comes with TWO of them) you will be able to make the repair, solid, and look fairly okay for what it is.I am CERTAIN with a couple uses, you will become REALLY good at it and it will look better than my poopie job depicted in the photos. I am not saying I want more broken things to fix, but really this was FUN to use, like a little craft project that took only 20 minutes. So the next time something plastic DOES break, this is going to be my go to tool of choice. 100%
Rigoberto L.
Reviewed in Mexico on December 17, 2023
Se economiza mucho en reparaciones.. muy fácil usar
Recommended Products