Your cart is empty.
Your cart is empty.Product Description
Outdoor unit
The outdoor unit adopts an integrated electric compressor, which greatly improves the refrigeration efficiency of the air conditioner and reduces the failure rate of the air conditioner. Compared with the traditional old-fashioned compressor, the integrated compressor has been greatly improved.
Indoor unit
The indoor unit adopts an intelligent numerical panel. When the air conditioner fails, you can see the fault code of the panel to confirm where the fault is. The five hole rotary air outlet can adjust the air outlet angle at will for low decibel operation.
Remote control
The remote control has a variety of modes to choose from. The cooling mode can be adjusted as required. The wind speed of the outdoor unit fan can also be controlled by the remote controller.
12V air conditioning parameters
- Voltage: DC 12V
- Starting current: 75A
- Power: 750W
- Refrigerating capacity: 8875BTU/1800W
- Compressor: integrated variable frequency compressor (including refrigerant oil)
- Refrigerant type: R134a/600g
- Outdoor unit size: 660 * 490 * 210mm (20kg)
- Indoor unit size: 455 * 355 * 165mm (6.5kg)
- Installation type of outdoor unit: (1) horizontal installation. (2) Vertical installation.
- Indoor unit installation type: wall mounted.
Installation steps
- Install the external machine: remove the casing, mark the drilling position, use an 8mm drill to drill holes, use a riveting tool to fix the rivet nut at the drilling point, install shock pads and sleeves at the holes of the external machine, and fix the external machine to the car .
- Install the expansion valve: remove the iron sheet at the position of the expansion valve of the evaporator, and fix the expansion valve to the evaporator. The two black screws correspond to the two holes, so there is no need to worry about wrong installation.Then wrap it in black cotton wrap.
- Install the indoor unit: first install the wooden board to the indoor wall, and then install the evaporator on the wooden board.
- Install high and low pressure pipelines: first open a (50mm) hole in the car, and then install the rubber cover with three holes. The thick pipe is the low pressure pipe and is connected to the compressor. The thin tube is a high pressure tube and is connected to the condenser. Then connect the other end of the high and low pressure pipes to the holes corresponding to the expansion valve of the indoor unit, use long black screws and iron sheets to clamp the aluminum joints, and tighten the screws.
- Install the connection line: connect the connection lines of the internal and external units, plug the power cord plugs into each other, and connect the drain pipe of the evaporator.
- Vacuuming/Adding refrigerant: It needs to be vacuumed for 15-20 minutes, and then add refrigerant R134a/600g. The refrigerant can be added according to the pressure value. Generally, after the R134a refrigerant is injected into the air conditioning system, the pressure at the low pressure port is 35psi, and the pressure at the high pressure port is 140-180psi.
- Connect the power cord: Connect the power cord to the battery, pay attention to the positive and negative poles of the battery, do not connect them wrongly, + positive / - negative. It is forbidden to connect it to the power-off switch and the power switch.
- Turn on the air conditioner: Drive the air conditioner to see if it works properly. If the current is insufficient, the refrigerant is too much or not enough, the control panel will display a code, which can quickly troubleshoot.
Lrg
Reviewed in the United States on November 28, 2024
Works great wish I would have ordered this a long time ago. I've spent over$6000 over the last few years trying to get the factory air working. I have taken the truck to three different places.One was the Kenworth dealer I bought the truck from. None of them could get it to work right. I finally bought this air conditioner and installed it myself. A lot cheaper than any of the places I took it to to get the factory air fixed. It took me about a half of a day to install it. I did buy a vacuum pump and a set of gauges from Harbor Freight to help charge the system. I would recommend this to anyone needing a good air conditioner.
Robin Los Angeles
Reviewed in the United States on July 30, 2023
The ac is easy to install . It cools ok. But: it needs a lot of power .
Wendy YU
Reviewed in the United States on June 13, 2023
Best product ever, cooling system runs faster than the others, high quality and stable, solid package with thunder shipment, I 100% recommend people to buy this.
EmergencyGetaway
Reviewed in the United States on November 16, 2023
We've been using the NEKPOKKA 12V DC air conditioner in our converted ambulance for the past few months, and it has exceeded our expectations.The air conditioner works like a charm, effectively cooling our space with ease. It pulls about 40 to 55 amps (12V) when the compressor is running. We requested custom length hoses, and NEKPOKKA provided them at no additional charge. The small footprint of both the inside and outside units is a game-changer, especially in a confined space like our converted ambulance.Installation:Installing the NEKPOKKA 12V DC air conditioner was a breeze. The process was straightforward, and we had it up and running in no time.Overall Impression:We highly recommend the NEKPOKKA 12V DC air conditioner to anyone in need of a reliable cooling solution for their vehicles. It's a quality product with outstanding performance, and the company's commitment to customer satisfaction sets them apart.This air conditioner has made our travels much more comfortable, and we couldn't be happier with our purchase. NEKPOKKA has delivered a top-notch product, and we're grateful for the enhanced experience it brings to our converted ambulance.
nnoooo
Reviewed in the United States on June 26, 2022
i know there is a video, i watched it. that is the only way to install the unit. i have screws that i don't know where they go. the video does not explain anything. you will need a special tool to install the nut inserts.
Azbek Magomed
Reviewed in the United States on October 14, 2022
I bought this item because I though to install it on my truck, but I sold my truck. I tried to return and it’s impossible because “it has some hazardous gases”. But it came not charged and I didn’t even unpack it, so Amazon doesn’t accept return. I tried to sell it to my friends but they all are afraid it might not be quality product.
rene gall
Reviewed in the United States on April 27, 2022
Thx
Sagitarious D
Reviewed in the United States on April 1, 2022
Works as expected & is very! Very ! Efficient! & strong cooling. I have 600ah lifepo4 battery that can run it all night till next day, (but battery doesn't drain due to 990w of solar on the roof the during day when charging) So basically can run 24/7 lolOriginal cables are not thick enough & do get a little warm but no big deal. As you see in pictures . The motherboard on compressor got rusty from very high moisture, my unit stopped working at 3-4onths of use.Motherboard is inside compressor & small. Also as seen on pictures the capacitors got swollen. Once I open it to see what's wrong with it, a lot of water came out from the small compartment where the motherboard sits on compressor side. Not a good design, not completely waterproof or sealed, screws got rusty. Also main negative & positive battery connection cables are not waterproof neither, (I'll upload a pic to show wich side)Long story short, it's an amazing unit!! Made me happy while it lasted! Only flaws are the compressor or (motherboard) overheats too quick on high temperatures & motherboard doesn't last long enough.The seller offered a new motherboard, since my warranty (3 months) is expired) so I'll try to seal it the proper way once it arrives.If the motherboard & overheating issue was fixed. I would buy unit over & over again. Maybe a unit with a motherboard outside compressor housing with a big heatsink?
Recommended Products