Your cart is empty.
Your cart is empty.Product Description
Zooz Z-Wave Plus Remote Switch
Simple and Smart Control
The Remote Switch adds simple wireless control to your connected devices. With a sleek design that matches the look of a paddle switch, the Remote Switch provides remote control of your Z-Wave devices, without needing to worry about wiring.
The paddles on the device work just like buttons on a remote control, and with hubs that support advanced parameter input, you can assign multiple actions to each paddle for single tap, double tap, held, released, etc. (up to 5-taps). The ZEN34 provides a great alternative to voice control for a modern and discreet way to trigger multiple devices and scenes.
NOTE: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The Remote Switch is supported by Hubitat, Home Assistant (Z-Wave JS), HomeSeer, and compatible with SmartThings (all hubs sold separately). Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
Flexible Installation
Stick it to a wall or install in a standard switch box.
Packed with innovation
Add Control Anywhere
Powered by 2 CR2032 coin batteries, the Remote Switch is simple to install. Forget the wiring hassle. It comes with a magnetic base designed to fit any standard switch box.
No electrical box? Simply stick this device to a wall with the provided adhesive tape. Now you can finally have a smart switch right by your bedside!
Great For Smart Bulbs
You can use the Remote Switch for simple on/off control of your smart bulbs or create more elaborate scenes featuring multiple devices. Trigger your favorite color and brightness presets with a click.
The Remote Switch can also be used with smart bulbs and switches as an additional point of control in virtual 3-way or 4-way set-ups.
700 Series Z-Wave Chip
Enjoy extended range and faster, more reliable wireless communication.
The Remote Switch comes with SmartStart for easier and safer pairing of your device, plus the added peace of mind of S2 authenticated security.
Keep your device up to date with OTA firmware updates.
Advanced Programming
Change the LED color to suit your preference or sync it with your scene activation (on hubs that support advanced programming.)
Program the ZEN34 via central scene control or direct association (on supported hubs) to add flexibility and advanced control to your Z-Wave devices. Trigger up to 8 scenes or control up to 8 devices with multi-tap control.
Customer
Reviewed in the United States on March 3, 2025
Works well with HomeAssistant. I have not been impressed with the battery life - it uses two CR2302 and they seem to last around two months before needing replaced.
ian Customer
Reviewed in the United States on February 5, 2025
The functionality is great, but the battery should really last longer than 3 months.I'll update my review if the replacement battery has a better lifespan.
Richard Crum
Reviewed in the United States on January 5, 2025
Use it on the night stand to control a group of three lights. Intergrated easily in SmartThings.
Customer
Reviewed in the United States on May 25, 2024
I rarely write reviews but I’m very pleased with this, so I’m writing day 1:I use z-wave plug switches power my lamps for ambient lighting in rooms (I hate harsh overhead recessed can lights, even with low kelvin bulbs).Bought this switch to control said plug switches by way of my Hubitat Elevation model C-7 running platform version 2.3.5.152.I am pleased with the result in terms of function for 3 reasons:1) Now I don’t have to tell my voice-activated smart home devices to turn off the lights, I can simply tap the switch on my way out.2) intuitive for visitors in my guest room, which lets them/me disable the voice based device for privacy peace of mind.3) robust programming flexibility: via Hubitat button controller app, I can program actions for FOUR actuations of EACH switch direction (up or down) for a total of 8 possible programs! 1) press, 2) hold, 3) double-tap, and 4) release… x2.I set mine so the press turns on or off (for each respective button), hold will pause (for 48 hours) rules that turn lights off or on based on a motion sensor, and double-tap resumes said rules. No action for release, but I could see it being used to have some light on only while holding the button down then turn off on release… or actuating a motor for smart blinds.As for the device itself:Feels like a solid, quality build and sleek modern appearance blends well with modern paddle switches.Be cautious, it could differ from your switches and/or switch plates, so if you care about that you might need to swap those switches, get a new plate, put on a wider plate (not sure if practical while keeping old gang box), or accept some mismatch.One gripe: Took a couple tries to pair, had to exclude to remove it then re-add, but it ultimately worked and I can’t for certain blame the device and not myself.
Customer
Reviewed in the United States on December 12, 2024
This switch is great, I was able to essentially add a switch to an existing wall where I wanted one. Super easy to program with my Homey Hub. Even better than the switch is the support from Zooz. I have also purchased their Zen32 switch and had questions about how to properly wire it given my electrical configuration. I can not overstate how helpful their support team was! They were very responsive, had me send them photos of my boxes, sent me back marked up photos, and spent 45 minutes on the phone explaining different options I had. I couldn't believe they were willing to spend that much time with me. It was very refreshing to have a support team there willing to help after the purchase is made!!
Anon6190289
Reviewed in Canada on October 16, 2024
It works well and follows Zwave specifications and can be programmed with advanced parameters from Home Assistant. My only complaint is that there is about a 0.5s delay after you press the button where it waits for a double/triple press, and only then does it transmit, so this means the switch always has a 500-700ms second lag from pressing it to the lights coming on. This bothers my guests who aren't expecting it and they end up pressing the button several times. If only there was a way to disable the double/triple press scene behavior and just transmit immediately on the first button press it would be perfect.
Kyle Dibble-Dabney
Reviewed in the United States on April 26, 2024
Easy to include into my network and very responsive (using Home Assistant). I like the optional wall mount but I have these sitting on the nightstands of our bedrooms. Multi-tap works great. Battery life so far seems good. Quite configurable for what they are. Haven't had a bad product yet from Zooz and their support is top notch. I have 4 of these on my network and every single one has been great.
DT_TO
Reviewed in Canada on January 2, 2023
I have standardized my automation using Z-Wave. I wanted to add a 2-way switch in two locations in my cottage and I decided to give this a try. It was SUPER easy to setup. In one location in a hall I just stuck it. To the wall. In the other I bought a 2 gang wall plate and mounted this under it next to an existing switch. I added it to my smartthings hub and then programed the click actions. It was up and working in minutes. I was pleasantly surprised to find that you can program double, triple etc clicks. This such a great device. The oy small drawback is that it runs on small coin sized lithium batteries but for the convenience it is worth the price of replacing the batteries every once in a while. Love this switch!
Eric
Reviewed in the United States on May 10, 2022
The media could not be loaded.
Salman Naqvi
Reviewed in Canada on March 1, 2022
I bought one a year ago, and then I bought three more since. These things are awesome. I have used these with SmartThings to control lights and other things super easily. The setup with SmartThings is easy enough - not much different than other zigbee and z-wave devices. The one I bought a year ago still has battery life - so the battery seems to last a long time - and uses a super common button cell battery type. I REALLY love the fact that I can put it on the wall, but, also, whenever I want to, remove the magnetically attached switch and use it anywhere in my room or house. SUPER CONVENIENT - both to install and use. Definitely good value for the cost
KC
Reviewed in the United States on June 24, 2021
If you have used the Luton Caseta Pico remotes, these Zooz Z-Wave remotes are very similar in terms of size and functionality. Primary difference is the Z-Wave functionality and mapping of the buttons you can set. There's a standard faceplate and uses magnets to stay in place within the faceplate if you want to use the remote as a replacement for a 3-Way switch. I've always appreciated the simplicity of the Lutron Caseta Pico remotes and being able to install them into wall switch location and quickly changing your single pole switch into a 3-way or more switch just using software. This Zooz switch allows you to do the same thing or just use it as a mult-functional Z-wave remote. Of all the 3 way smart switches out there for Z-wave, I think this is the most elegant solution.Remote Switch was easy to pair with Hubitat and was identified quickly (click the top button 6x to enter pairing mode), button assignments were quick and easy, and is able to work with my other Z-wave switches seamlessly. There are two batteries, so will monitor the battery life, but it's been great to see something like this for Z-wave. Quality of the plastics and construction appear to be good quality. Thus far, very pleased with the purchase and will buy another one.
D. Huras
Reviewed in Canada on February 22, 2021
This switch is easily included to your ZWave network via Homeseer (HS3 in my case) and its a simple matter to spawn events and/or control devices based on input from the switch. You can trigger things based on the number of taps (one to five on either side of the paddle switch); you can also trigger events based on holding either side of the button down. (You can also trigger an event when the button is released...but I am not using this feature as it implies to me that you'd always trigger 2 things...the initial hold down, AND the release). Regardless, its great to have this kind of simple control of Zwave devices without having to use some of the cumbersome remotes that are available.
Dan M
Reviewed in Canada on October 20, 2021
Connected to SmartThings with no special handler. Lots of programming options. Love it!
Recommended Products