Your cart is empty.
Your cart is empty.Product Description
2" x 2" Slip-On Cast Iron Sewage Check Valve
From the Manufacturer
Save time and material costs with this 2-Inch cast iron slip x slip union. The 30-0151 is simple to install (no threading of pipe is required). The neoprene gasket and flapper are weighted with heavy stainless steel metal backing plates and a stainless steel rivet. This product slips over ABS, PVC, steel pipe or copper piping and can be installed on vertical or horizontal line. It checks backflow of water and sewer gas and reduces motor and pump noise from the plumbing system. The 30-0151 meets the requirements of Wisconsin Uniform Plumbing Code. The flexible neoprene slip x slip union includes stainless steel clamps for low pressure systems. Avoid more than 10-Feet static head above the check valve.
Winston Woodward
Reviewed in the United States on January 6, 2025
Let me start by saying I am not a plumber by trade. However I’m broke and can’t afford one so I must do my own repair work. A while back our sewer extraction pump was overflowing and leaking and the previous owner even had it venting inside the house. So I fixed the pipes to vent outside, replaced the cover and bought 2 separate check valves and they both leaked. So after some research it seemed to be the consensus of the plumber community that this brand is what you want. I was reluctant considering it’s more than twice the cost of others but I bought it and I’m so glad I did. Not only did it not leak from what I read if in the future it goes out you can rebuild it because it’s cast iron not plastic. If you are trying to send poop uphill just buy this one first or you will have to buy it after you fail with the cheap ones. Quality comes at a price but so does piece of mind. After all I want what is best for my family and this is it.
Nancy A. Werth
Reviewed in the United States on August 17, 2024
This was very easy to install and works well. Much quieter than PVC S-613 Legend valve. Definitely go with the cast iron. What a difference.
Ramesh Savla
Reviewed in the United States on March 7, 2024
Great product
Live Simple, Live Well
Reviewed in the United States on November 25, 2024
Rugged and bombproof.But thuds loudly when the pump turns off.
Thinker
Reviewed in the United States on October 12, 2024
There are hair raising stories by people whose plastic valve exploded, because it was...glued. Even drinking bottles are made as one piece by blow molding...what an idiotic design for a part under the internal pressure!I just replaced it with Zoeller valve because I DID imagine my basement looks when that valve breaks and starts shooting excrements all over the area....GOOD job, Zoeller...your valve is top of the line and worth every penny!
Client d'
Reviewed in Canada on April 26, 2023
merci
Randy
Reviewed in the United States on February 20, 2020
I moved into a very old Mid Century home about a year ago. The first thing I noticed was a bad odor coming from the basement. Being a city dweller I had never had to deal with an ejector pump. I did some research and found that my old sump pump was defective. So I did more research and found that Zoeller made some of the best and found almost all reviews to positive. I replaced the Backflow preventer as well as the Ejector pump. The old was loud, every time it eliminated waste up into the main it sounded like an explosion. My cats even jumped. (I think they still have PTSD from that pump) So long story short, the new Zoeller backflow preventer and ejector pump are very quiet, efficient and sturdy. They're made off Cast Iron and are heavy duty. I think that's what makes them so quiet, instead of those cheap pumps. Believe me, you want to pay a little extra and use Zoeller.PS- I'm considering getting Aroma Therapy for the Kitties.. Lets hope they'll forgive me.
NorKeil
Reviewed in Canada on March 2, 2016
Very robust unit. It should last for many years.
Mashpo Tatoe
Reviewed in the United States on February 19, 2016
So far so good with this valve. I had to replace the old one after it got clogged with a child's toy that had been flushed. The clog caused a pressure build up that forced the union to separate. I could hear a strange noise coming from the mechanical room after flushing the toilet. So, like an idiot I flushed the toilet again and then went straight into the mechanical room only to be greeted by the lift pump spraying raw sewage all over the entire room blanketing the furnace, hot water heaters, storage boxes and myself. Do yourself a favor and make sure you get a secure connection to your pipes and if you hear a weird sound coming from your lift pump, check the pump and plumbing first before flushing the toilet again.
brc
Reviewed in Canada on December 3, 2016
very fast delivery, had to cut 3/4" from the sump pipe but installation only took about 15 min. altogether and no more loud thud after every cycle
Phyl R
Reviewed in Canada on February 15, 2015
This was very easy to install and works well. I installed it replacing a leaky one. It is being used for an ejector pump in our basement washroom.
Julie Mo
Reviewed in the United States on December 4, 2011
I just installed this along with a new Zoeller ejector pump. It has a solid cast iron body with heavy duty rubber sleeves that fit snugly on the 2" SCH40 PVC waste pipe. The flapper is made of a heavy rubber membrane with a large stainless steel plate on top and a smaller one on the bottom. It looks like it should hold up to the rigors of sewage pumping.The only problem I have with it is it came with no product information, no warranty information (if there is any) and no paperwork of any kind. If someone has never done this before, I guess there's a possibility it could be installed upside down. There is no flow direction on the valve either. So, if you're not paying attention... (no, I didn't make that mistake!)But without some sort of product information, you have no idea what part to order should one fail. The body should last forever. But the rubber parts will eventually fail. I like to have that kind of information on hand. Also missing was a packing slip and/or receipt.
Recommended Products
$311.25
$ 99 .00 $99.00