Good product, excellent performance, and very, really good service to the client.

This is a review of the Yuka 2000 purchased in November of 2024.How long does it take to cut the grass.My lawn has 5 cutting areas totaling 11,947 sq. ft. There are sidewalks, curbs and several planting areas, some in the middle of the area to be cut. The estimated mowing time for all 5 areas is 147 minutes at 2 feet per second mower speed. Starting at 100% charge, the actual elapsed time including charging was 4:22; temperature between 50 and 60 degrees. I have good GPS satellite reception in my area. My grass is Bermuda grass and none if it was actually cut – its December and the grass is dormant – but the blades were spinning.Getting StartedAfter unboxing, initial charging, downloading the Mammotion app for your phone and creating a user ID it’s time to setup the equipment.First, select locations for the RTK ( main satellite antenna ) and the charging station. The RTK needs a clear view of the sky. The clearer the view the better. The charging station needs a good view of the sky for satellite connection because the mower, when parked at the station, needs the satellite connection to get started. The mower’s coordinates when parked at the station, are used to establish the GPS coordinates of the station. When mowing, the status page on your phone, if you touch the status bar, it displays a comprehensive connection status. One of the important things in the display is the number of “Co-viewing” satellites for the RTK and the mower. The more the merrier. I had good results with more than 20 for both L1 & L2 satellites. I moved the RTK and the charging station around until they both had good satellite connections. You will need power for the charging station and the RTK. If you co-locate the RTK with the station, there is a connector for the RTK inside the tower of the charging station. If they are in different locations, there is a separate power supply for the RTK. The included cables are very long.Next, establish a Bluetooth and WiFi connection to the mower and RTK. Do not use a guest WiFi network because the two devices will not see each other. You can manually drive the mower using the Bluetooth connection.With good GPS signals, I mapped one small area adjacent to the charger, told the mower to cut the area, broke open a beer and watched. It drove the perimeter correctly, mowed the area in the desired path and returned to the charger, I was happy. Next, I mapped an adjacent small area. It mowed that area, drove thru the first area and back to the charger. I was not concerned with precision area mapping. My focus was on RTK to mower connection and satellite reception in my yard. I mapped 3 more areas testing each one to ensure that the mower did not get lost. All five areas worked.Mapping AreasYou need to drive the mower around your yard to map the areas to mow. If you must drive over a sidewalk or driveway, to connect one area to another, you create a channel. If two areas touch you do not need to create a channel. I broke some very large contiguous grassy areas into several smaller areas.The app calls mowing “Tasks”. Each task describes a mapped area to mow and a collection of settings. Settings include when to start mowing, “Task speed” how fast – in feet per second – to drive the mower, the type of cutting path, path spacing, number of perimeter laps, number of no-go zone laps, and path order.SetupIn my case getting started was not as easy as many videos lead you to believe. I spent about 6 hours figuring out why the mower and the RTK would not connect. Turns out, when I installed the app it said it needed to update the firmware on the mower, which it did. The installed firmware on the RTK would not talk to the new firmware on the mower. After updating the RTK firmware, the mower and RTK connected and started working.Other Observations1. To map an area, you position the mower on the perimeter of an area and manually drive the mower around until you are back at the starting point. I am not a very smooth operator in terms of sliding my thumbs around on a phone screen to move the mower. Also has the mower trundles along there is some left and right drift. The little corrections I made to keep the mower on the intended path, show up in the mapped perimeter. When the mower actually cuts the perimeter it jinks right and left just like it did when I was laying out the area. There is an option to modify the path during this process. But if you are already awkward with the thumb controls it was little help. One solution in to drive the mower around in a wheelbarrow, that is less precise but very fast. I pulled my mower on a piece of cardboard, which negated the drifting and made it very easy follow the curve of a sidewalk or driveway. I could see exactly where the rear wheel of the mower was relative the edge of the area.2. Out of the box the app sets the cutting width to about 7”. The Yuka 2000 has a cutting width of 11.4”. So, you need to change the cutting width in the task area to avoid wasting time. You can only change this when it is NOT mowing.3. In the settings for a task, there is a button for the sweeper attachment. Mine was enabled and set to sweep by default, but I do not have the sweeper attachment. It should only enable the sweeper button if the sweeper is attached.4. To avoid the problem I had when starting, there should a single “Update Firmware” button in the app that updates both the mower and the RTK firmware.5. The RTK can communicate to the mower in two modes. One mode is over the internet using the SIM card, if installed, in the mower. The other is via your local network, known as LoRa. Over the internet is the preferred method. There is a status light on the RTK. It is blue if it has an over the internet connection to the mower. And green if the connection is over the local network. I covered the light with some tape, because I did not want another status light glowing in my front yard.6. Once it starts mowing the status screen shows your areas, the predicted mowing path, current mower position, remaining mowing time and percent complete. At the bottom right under the “Remaining” heading, it shows an estimate of the remaining minutes of mowing and below that the total elapsed time including charging. It is very informative.7. By default, it mows the areas in the order they were mapped. I could not find a way to change the mowing order of the areas.8. When the battery hits 15% charge, it pauses the mowing, returns to the charging station. It resumes mowing at 80% charge, but if you have just a little bit more to mow, you can tell it to continue mowing if it’s not fully charged.9. Battery management could improve. I had 5 minutes left to mow and the mower was 20’ from the charger when it hit the low limit. It would be nice if it said “hey I am close to the charger, I can mow a little more and finish the job and I will have plenty of charge to get back to the charger”.

Mega Produkt tut was es soll, Kundenservice extrem freundlich. Reparaturen werden sofort ausgeführt. Alles bestens kann ich nur weiterempfehlen.

It is super quiet. You could run this at 3 am and it would not bother anyone. I love the various levels you can adjust the blade height. My approximate 1/4 acre lawn gets done on one charge. Make sure the satellite receiver is in the absolute open, with open sky and no obstructions. That is important. If I have a complaint it would be with the software, it needs a little refinement. I cannot define the problem I have, but it does not work as easily as I think it should. It's a small complaint, I expect the company to improve the software with updates. I am willing to wait. My lawn looks great and I like this mower. It's well made and somewhat robust.

Salve, voglio semplicemente evidenziare la super efficienza del servizio assistenza Mammotion che è a livelli top!!Ho avuto un problema con la stazione di ricarica del robot yuka 1500 dopo soli pochi mesi di utilizzo e contattando l'assistenza, è stato compreso il problema e in 7gg lavorativi ho ricevuto la nuova stazione di ricarica!!! Problema risolto e felice di esprimere le mie congratulazioni a tutto lo staff!!Saluti

I bought the YUKA 1500 as a Christmas present for myself due to my seasonal allergies. Luckily it was still warm enough to test it when it arrived. It did an amazing job mowing. I did have an issue several times while programming it where it would lose its positioning, and I would need to start over. I messaged the support team right on the app and they helped me conclude that mounting the RTK unit on my tv antenna was most likely causing a signal loss due to it being so close to metal. They understood that it took a lot of time and effort to mount it up there. They sent me a brand new RTK unit with only the promise that I would provide feedback to help others in the future. This is clearly a forward-thinking company.

Ich war wirklich sehr überrascht, wie einfach die Inbetriebnahme und Kartenerstellung war und hervorragend funktioniert. Manche Teile im Garten muss man wohl ein bisschen an den Robi anpassen.Bei mir hat er jetzt den letzten Sommer gemäht und das wirklich gut und zuverlässig.Das einzige was ich bemängeln muss ist die Einstellung zwischen ohne Berührung und leichter Touch, bei ohne Berührung dreht er zu früh um und bei leichter Touch schiebt er teilweise noch an das die Räder durchdrehen obwohl er schon am Baum ansteht. Ich hoffe das wird noch über ein Update angepasst.Das Schnittbild kann sich auch sehen lassen, natürlich müssen dafür auch mal die Klingen gewechselt werden.Ganz klare Kaufempfehlung

Mine stopped working few hours after I received it. I couldn’t connect to the Bluetooth anymore. Reading through the reviews online, lots of people encountered this issue. I was lucky that it happened so soon and was able to get a refund. I don’t recommend this product. Stay away from it.

Vraiment une superbe machine. En marche depuis 6 mois. Ma pelouse est toujours impeccable.Cela m’a pris 2h pour programmer une terrain très complexe avec beaucoup de massifs et et de zone differentes. Cela aurait été impossible avec des fils.L’application est facile a utiliser.Franchement je suis très satisfait. Aujourd’hui je suis a 2000km de la maison et je lance la tonte. Je suis a distance avec la caméra fpv. Fini les retours de vacances démorlisant.J’ai fais appelle un fois au sav pour un problème sur la caméras. J’ai une réponse en 5 min par chat et un contact après 1h par mail avec un technicien. Le lendemain le problème était résolu.Pour moi et jusqu’à aujourd’hui c’est un 10-10.

Ce robot fait dans l'ensemble un bon taf,surtout que je n'ai pas un terrain facile. Les 1500m2 dont il s'occupe sont en pente, avec beaucoup d'obstacle (tronc d'arbre, haies, fleurs, mares, grosses pierres en tout genre...etc). Il s'en sort plutôt bien.Et il le ferait encore mieux sans l'essuie glace.... En effet, il n'est pas rare que lorsque il tape contre un obstacle ou monte sur une motte de terre (taupe imprévisible), le capot qui sert de bumper va se coincer sur la fixation d'essuie glace, et ça agace....Les mises à jour successives ne sont également pas folles. Le robot capte de moins en moins bien le gps et s'arrête dès qu'il passe sous un arbre. Ca aussi ça agace.Sinon, il est rapide, simple d'installation (malgré un jardin en plusieurs zones séparés par des corridors), efficace (c'est toujours propre) et endurant (les recharges sur une journée de tonte restent rares).Je ne regrette pas mon achat mais espère que les mises à jour à venir aideront à améliorer réellement ce robot.Il serait aussi bien qu'il se déconnecte moins vite lorsqu'il se met en pause car toujours aller le chercher dans le terrain,c'est frustrant.

The media could not be loaded.