Shopping Cart

Your cart is empty.

Your cart is empty.

YH.YX11A Buoy Type Oxygen Inhalator Absorber Flow Meter Pressure Gauge Reducing Valve Regulator G5/8 BSPP

4.8 (8) Write Review
Free shipping on orders over $29.99

$29.99

$ 13 .99 $13.99

In Stock

About this item

  • PREMIUM QUALITY:The pressure gauge uses high-quality glass, thick and anti-drop design, clear scale and high sensitivity. The pressure reducing valve is made of high-quality brass, with high toughness, wear resistance, and more secure sealing. The oxygen cylinder connection port is equipped with gas filter Internet, double protection is more secure
  • FEATURES:The oxygen pressure reducing regulator uses a piston-type pressure reducing structure with a small volume
  • Adjustable: You just need to connect it to an oxygen cylinder to adjust the flow of oxygen output, without worrying about the oxygen flow being wasted because of too fast oxygen flow
  • Applicable to: Oxygen flow meters are suitable for home, outdoor, plateau, and oxygen supply system to provide oxygen inhalation
  • Usage: It regulates the variable inlet pressure to a stable outlet pressure as much as possible


Product Description

Oxygen Inhalator

Yicaca

Instruction

Oxygen Inhalator is mainly used in the oxygen supply system

1、Mainly component name(Pleasesee overleaf)

2、Mainly function:

2-1.Oxygen flow range:1~10L/Min 1~15L/Min

2-2.Pressure reducing range:2.0~3.0kg

2-3.Relief valve Pressure range:(3.5kg±0.5kg)

3、Appliance introduction:

3-1.Before using, please fill pour clear water into moisture bottle about one third

reaching water line site.

3-2.DF-2 blind nut straw into bolt head, make the pipe of flow meter square water line.

3-3.Put off regulator(9),put on oxygen tube switch, so you will the data from needle position of pressure gauge(2).At last, straw flow on/off at anti clockwise according to need, adjust switch.

3-4.If you need oxygen for a long time,can use the pipe to help absorb oxygen.

3-5.Moisture bottle(20) circles at clockwise,adjust(17) oxygen hole to other site.

4、Attention point

4-1.Before using the suction, you will check all parts bad or good and clean it by drying cloth.

4-2.Pressure gauge(2),regulator(3) no oil, otherwise explode

4-3.Clearwater in moisture bottle keeps clean

4-4.There is adjustable nut(6) in the front of plunder shall be straw at clockwise.

4-5. Relief value(7)(15) keeps out of danger.

4-6.After using suction, put off the oxygen tube switch, make rest oxygen out, pressure gage to zero site,last put off flow switch if using again, first put on the oxygen tube switch,avoidexploding

4-7.The product must be examined periodical, at least once every 6 month

Yicaca

Specifications:

  • Product name: Buoy type oxygen inhaler
  • Input pressure: <15Mpa
  • Output pressure: 0.25Mpa
  • Flow adjustment range: 1-10L/min
  • Safety valve: 0.5Mpa automatic exhaust
  • Imported thread: G5/8''
  • Export thread: M12x1
  • With humidification bottle device

  • Use:
  • It is mainly used in the oxygen supply system of the oxygen supply and scientific research institutions, industrial and mining, etc. The oxygen inhaler has precise flow and is easy to use and safe. It is an essential equipment for oxygen supply system.
  • Working Principle:
  • The role of the oxygen inhaler is to provide continuous constant pressure and flow of oxygen to use. The bottle-inserted oxygen inhaler uses the self-contained pressure reducing device to reduce the high pressure in the oxygen cylinder (15Mpa pressure at the full bottle) to the low pressure (0.2~0.2Mpa) suitable for use, and then output it.
  • The wall-inserted oxygen inhaler has an input pressure of 0.2 to 0.4 MPa, so it is not necessary to decompress and directly output.
  • Operation method:
  • 1. Add distilled water to the humidification cup. The water level in the bottle cannot be higher than the upper water line, but not lower than the lower water line. It is forbidden to use normal saline instead.
  • 2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch and adjust the direction of the oxygen quick plug, and then insert the quick plug into the oxygen supply terminal socket. When you hear a "click" sound and see the oxygen supply terminal When the locking sleeve of the socket slides automatically, it indicates that the quick plug and the oxygen supply terminal socket have been connected and locked.
  • 3. Insert the oxygen inhalation tube into the oxygen supply connector before supplying oxygen, and then turn the flow adjustment switch counterclockwise to turn on the origin, so that the float rises slowly (the scale line aligned with the center of the float is the flow reading, and the unit is liters/min) , The oxygen supply can be adjusted accordin
  • Package list:
  • 1 * Oxygen inhaler
  • 1 * Nasal tube
  • Note:
  • 1. Please allow slight error due to manual measurement. Thanks for your understanding.
  • 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standar
Yicaca

Component Name:

1. Flow meter

2. Pressure Gauge

3. Pressure Reducing

4.(DF-2blind Nut)G5/8G 7/8 CGA540

5.Gas Filter Unit Inside

6.Pressure Reducing Plunger System

6.1 Spring

6.2 O Model Circle(ф6x1.9)

6.3 O Model Circle(+22x24)

6.4 Gas Hole

7. Relief Value

8. Flow meter Buoy

9. Flow Switch Dump Iron

10.Dump Iron

Yicaca

Component Name:

11.O ModelCircle(ф15x2.4)

12.Gas Pipe Dump Iron

13.O Model Circle(ф15x2.4)

14.O Model Circle(ф22x2.4)

15.Relief Value

16.Gasket

17.Oxygen Hole

18.A Bind Nut

19.O Model Circle(ф60x3.5)

20.Moisture Bottle

21.Gas Pipe

22. -Water Line-

23.Filter


Mayte Galigarcia
Reviewed in the United States on February 21, 2025
Excelente
Yayi
Reviewed in the United States on November 26, 2024
Llegó en tiempo, fácil de usar e instalar, gracias
Mayelin Crespo
Reviewed in the United States on October 16, 2024
Did not needs it any more
Osloandys
Reviewed in the United States on May 21, 2023
Muy buen producto excelente
Rudi Stolt
Reviewed in the United States on December 8, 2022
Good value
maria romero
Reviewed in the United States on August 20, 2021
Demasiado bueno! Llegó a tiempoExelente compra
Michael
Reviewed in the United States on August 12, 2021
This product make very cheap. Definitely not a good buy.
RMASTER
Reviewed in the United States on July 1, 2021
Responsable
Recommended Products
Gas Cylinder Regulator Protector Safety Cap Fine Thread 3-1/8 x 11

$96.95

$ 41 .99 $41.99

4.5
Select Option
InoKraft Air Compressor Regulator 1/4' NPT, for Spray Guns and Pneumatic Tools, Good Tightness, Precise, 0-140 PSI

$24.48

$ 10 .99 $10.99

4.3
Select Option
Watts LF25AUB-Z3 Series 1-1/2' Lead-Free Cast Copper Silicon Alloy Water Pressure Reducing Valve, NPT Female Union x NPT Female Outlet, Polymer Seat, Adjustable Pressure 25 to 75 psi, Maximum 300 psi

$376.25

$ 99 .00 $99.00

4.4
Select Option
Toilet Button Pusher for Nail Protection, Toilet Seat Lifter Accessories, Cute Flower Toilet Tank Button for Long Nail Aid (2PCS Clear)

$7.99

$ 3 .99 $3.99

4.6
Select Option
VULCAN-HART 3/4' NPT Nat Gas Pressure Regulator 3' to 5' Water Column Range 00-408279-00022

$29.08

$ 12 .99 $12.99

4.7
Select Option
Universal Natural Gas Pressure Regulator with 1/2'-14NPT Thread Inlet and Outlet connection, 1/2 PSI Inlet Pressure and 4' WC Outlet Pressure(NG)

$18.99

$ 8 .99 $8.99

4.4
Select Option
Watts LF25AUB-Z3 Series 1' Lead-Free Cast Copper Silicon Alloy Water Pressure Reducing Valve, NPT Female Union x NPT Female Outlet, Polymer Seat, Adjustable Pressure 25 to 75 psi, Maximum 300 psi

$243.03

$ 99 .00 $99.00

4.6
Select Option
Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4' QC Ports, 40 PSI

$15.00

$ 8 .99 $8.99

4.3
Select Option