Your cart is empty.
Your cart is empty.Product Description
Want to keep on your cycling training schedule but the weather condition outside doesn’t seem so well? Or trying to reduce risks to the minimum when you’re preparing for an important cycling event?
Let our indoor fluid bicycle trainer helps you convert your outdoor bike into an indoor stationary bike!
Specifications:
Materials: steel, aluminum, PE plastic;
Unfolded overall dimension: 21.5 x 24.5 x 16’’ (WxDxH);(Contains Fluid Flywheel)
Folded overall dimension: 21.5 x 8.5 x 19’’ (W x Thickness x H);(Contains Fluid Flywheel)
Suitable for 26'' to 28'' and 700C wheels
Max. load capacity: 265 lb
G.W.: 22.2 lb
Please pay attention to the compatible quick-release skewer type and bike tire types of this bike trainer.
Compatible bike tire: 26-28 in
Compatible quick-release skewer diameter: 0.2 in
Compatible quick-release skewer length: 6 in
This bike trainer includes a M5*6 in quick-release skewer. If your current M5*6 in quick-release skewer is incompatible with the bike trainer, we kindly request that you replace it with the one provided.
Incompatible Axle Types: Bolt-on/Solid Axles、Thru-Axles
The fluid bike trainer is smooth in applying resistance starting,maintaining speed,and coasting down
For your better riding experience, this indoor bicycle trainer stand features a noise-reduction wheel as well to further lower the noise.
Smoother and quieter fluid bike stand with stable progressive resistance gives you more road-like riding experience.
The foldable design makes this fluid bike stand easy to store without occupying much space when not in use. It can slide into any narrow space in your room.
Universal quick release fitting make it more convenient to use our bicycle trainer.
The cycle trainer features M-shaped design for better stability, safety and adaptability.
This fluid turbo trainer is secured by four non-slip feet caps to prevent the trainer from displacing or damaging the floor during a workout.
Why need an indoor trainer: When you need to prep for a cycling race at the minimum risks, or you’re not in the mood for an outdoor activity, or don’t want your training plan be interrupted by inclement weathers, the indoor bike trainer is always the best solution.
Great way to turn your bike into winter inside trainer! You could enjoy pedaling & watching it snow through the window.
Assembly was easy and works like a charm.Makes it super easy to get your exercise in bad weather.
Note: Although the mounting system can be compatible with most quick release skewers, we recommend replacing the original quick release skewer with ours to reduce risk of damage. Furthermore, our quick release skewer is also functional in the daily use of bike, so the replacement can also spare you from changing the quick release skewers too often.
Aaron J OConnor
Reviewed in the United States on February 14, 2025
After you get it together then setup is easy. Not put that many miles on the thing. We got few hours sitting on the bike. I like front wheel thing. I watch video when riding so when I see curve I naturally want to turn. It will slid or let me turn it a little. You don't want buy front wheel thing by it's self if notice price of those. Get a kit. Yes there is some noise so use volume button and turn up TV. I don't adjust Stand. Set it like you want and forget it. Bikes have gears if you want do that, which be more real! I don't want ride outside with ski mask to keep my face from being frozen. This is helping me keep in shape.
Gabbotonic
Reviewed in Mexico on December 1, 2022
El producto es bastante silencioso.. da seguridad montar la bicicleta en el.. incluso está donde pie.. la dureza es progresiva y eso me gustó.
doc
Reviewed in the United States on February 28, 2021
I haven't put a ton of miles on this yet but it is sturdy and a very good value. The instructions are kind of sketchy but an easy assembly overall. The noise level is decent and would be easy to tune out with some headphones or earbuds, and of course the noise will increase as you add tension either with the adjuster or by changing gears. This is my first trainer so I have no way to compare to others, however. It would be nice to have a tension (resistance) adjuster that could mount on the handlebar but you can vary the resistance by just shifting the gears; otherwise, to change it you have to dismount and turn the resistance knob on the back of the trainer. The unit is sturdy and you can ride hands-free without worry of the bike tipping over. There are several trainers on Amazon that do have a handlebar-mounted resistance adjuster. The trainer comes with the front tire support and a skewer (that holds the rear tire on the frame) that replaces the one on the bike to allow the trainer to lock properly and tightly onto the skewer nuts. It may be possible to lock it onto your existing rear tire skewers as per the instructions if they fit; in my case I'm using an older, heavier bike that I will just leave attached with the included skewer for best fit and stability. There is nothing needed to buy to use this trainer that is not included in the package. A couple of assembly tips:1. there are 2 similar looking parts numbered 8 and 11 in the instructions., Number 8 has a hole through it and #11 has and indent but not a full hole. 8 is used early in the assembly, the tension adjustment "screw", part 6, fits through it.2. Near the end of the assembly part 11 is used; this part is where the end of the adjustment screw (part 6) fits against. When you place part 11, tighten part 6 just enough to hold 11 in place. This is not in the instructions and part 11 will keep falling out as it is difficult to stabilize later...not a big deal, just inconvenient.3. there is a hollow black plastic "cup" included with the parts that is not shown or mentioned in the instructions. This fits over the tension screw handle to make it easier to turn.
Customer
Reviewed in the United States on November 15, 2020
It's my first experience with a trainer, although I'm a serious cyclist in terms of ride frequency (3-4 per week) and length (up to 60 miles on Saturday road rides). The unit is sturdy and works well. (Five rides so far) There is a definite warm up period of 15-20 minutes, after which the resistance noticeably and suddenly increases (I don't understand how this is possible mechanically). I don't have any data devices but it's not just my imagination or fatigue. This is not an issue, just something to know: it's easy enough to downshift a gear or two once it happens and keep spinning. With no basis of comparison the following statement may be characteristic of trainers, but I feel that the flywheel is too small because there is a slight surge with every pedal stroke. I'm working on a project to try building a larger flywheel and see if it smooths out the stroke and makes a more realistic feel. I'm not talking about resistance, but smoothness: there's plenty of resistance and that's not the flywheel's job anyway. I was pleasantly surprised by the sound level. The trainer makes a whirring sound that is no louder than the crunch of the chain. I'm using a trainer tire which probably also helps noise. I run a box fan and the fan is also just as loud as the rig. Assembly effort out of the box is trivial.
Raymond
Reviewed in the United States on November 12, 2020
First let me say that anyone complaining about noise doesn't have sense enough to realize it's the tire, not the trainer making noise. It's very quiet with a slick tire. The resistance is not really adjustable but it really does seem to be kind of perfect anyway. Its easy at low cadence in an easy gear but drop into higher gears and pick up the pace and the resistance stays with you. Maybe gets a little tougher. I thought it might be a little too easy but 15 minutes later I was wondering if it was too hard. You can easily downshift and make it easier if you want.I liked this model because it came with both an extra quick release skewer for the bike and the front wheel riser block. The stand itself is very sturdy and folds easily to be put away. The built-in quick release locking mechanism makes it so that you can set this up in a hot minute. I took one star off because the instructions are impossible to understand. The assembly is actually very simple its just that you can't tell from the instructions. Its not even bad English, it's bad photos and nonsensical diagrams. Mine came with 2 extra parts which threw me for a minute.Overall, after a lot of research I'm very happy with my purchase. I probably saved $100 compared to other fluid models.
Recommended Products
$1,999.99
$ 99 .00 $99.00
$129.99
$ 63 .99 $63.99