Shopping Cart

Your cart is empty.

Your cart is empty.

XMark Commercial Olympic Weight Plate Tree or Bumper Plate Tree, 750 lb Capacity, with Two Bar Holders and Transport Wheels

Free shipping on orders over $29.99

$229.00

$ 90 .99 $90.99

In Stock

1.Color:1) For Olympic Weight Plates


About this item

  • DURABLE STEEL CONSTRUCTION: Crafted from premium-grade steel, this Olympic weight tree is built to withstand intense use, supporting up to 750 lbs. of Olympic plates, making it a must-have for any serious gym setup.
  • EFFORTLESS MOBILITY WITH CASTORS: Move your gear with ease. The heavy-duty castors ensure smooth mobility and, once locked, will stay firmly in place no matter how much weight you're moving around.
  • ORGANIZED WEIGHT STORAGE: Featuring seven strong storage posts, the vertical plate rack holds a range of Olympic plates from 2.5 to 45 lbs., keeping your weights neatly organized and within easy reach during every workout.
  • DUAL OLYMPIC BAR HOLDERS: Keep your Olympic bars secure and close by with the two dedicated holders. This efficient vertical barbell holder design ensures your bars stay off the ground and ready for action whenever you need them.
  • COMPACT, SPACE-SAVING DESIGN: Maximize your gym’s potential. This vertical design minimizes its footprint, storing all your plates and bars in one compact space while leaving room for serious training.


Choose between the XMark Olympic weight plate tree or the Olympic Bumper Plate Tree. The XMark plate tree allows ample room to store and grow your weight plate collection. You can rely on this XMark storage tree to carry the weight and handle whatever you can throw at it in both commercial settings and in your home gym. Keep your weights off the floor, organized, and protected with this compact, presentable vertical storage tree. Four swivel casters make moving your equipment a breeze. Easily roll your weights and bars out of the way and utilize the two locking casters to keep it in place for convenient storage. Note: This storage tree was designed to be used with casters. To protect flooring, casters must be used. The XM-9055 is designed to store Olympic weight plates, while the XM-9057 conveniently stores Olympic bumper plates. XMark is a trusted brand found in schools, gyms, and homes across the United States. Long-lasting quality is what you can expect from XMark.


knightkazz
Reviewed in the United States on July 31, 2024
Pros:Very strong and sturdy equipmentCan hold Olympic size weightsCan hold Olympic size weight bar (max 2)Portable/Easy to move aroundCons:If you dont have the proper tools, it will take longer to assemble
Ms Kay
Reviewed in the United States on July 14, 2024
We just built out a garage gym and needed a weight tree. This thing is fantastic- space for all your weights plus two bars. Moves easily and the locking function is key.Sturdy material, easy to put together. Best value product we could find and the price was great. Highly recommend.Also shipped much faster than the estimated delivery date.
A. Kouns
Reviewed in the United States on July 18, 2023
This one of the nicest and most solid items I've put together from Amazon. Everything fit together nicely. Instructions are an exploded diagram, but it's common sense to put together. I think this will easily hold all the weight it's listed for. It rolls super easy as well.
JV
Reviewed in the United States on March 9, 2023
I thought it was a little pricey until it arrived and put it together. Thick gage steel, rolls smoothly. I only have 300lbs on it but it moves with ease. The brake is a great addition. Heavy duty, worth the price! Only wish it came with instructions to show my Teens how to put the weights back on after use.
Nathan
Reviewed in the United States on October 29, 2023
Upon putting together details or lack there of were noticed. Appears robust. Design and style are great no complaints. PROS: Holds 320 lbs with ease and can be carted easy. Coated metal frame and chrome finished sleeves. Wheels are hearty and the locking function of the wheels is very easy to operate. Holds two bars and has plastic sleeve for bar protection in the bar holders. Rubber stops so the weights won't slam against the frame. CONS: finish could have been applied neater as a couple spots were missing paint and raw metal is exposed. The sleeves should have been designed to bolt from both sides not just one side. The sleeves don't come with spring clamps and are smaller than 2 inch so finding clamps to prevent weights from being taken off by body bumps or by kids is going to be hard if at all possible. Plastic end caps for the sleeves should have been made of rubber, cut to fit so no exposed metal from the sleeves ends are showing and likely to scratch the weights sleeve collar and in case if tipage the sleeves are protected. The metal may be strong enough for the job however flexing from the bolts being tightened occurs. The two outside plates that help support the center frame to the leg supports should have been made of a stronger grade steel also. Overall: priced a little high for metal quality. Will do the job with at least 320 lbs. Great design overall. I would definitely recommend this to buyers but i would only buy this product again if a newer more robust model comes out. Saves a lot of space. Wheels are great and strong. Easy to assemble, only took 10 min with one person. I would be willing to spend more money for this design(LOVE THE DESIGN) if made of higher quality metals. I rate this at a 3.8 overall
Jimmy
Reviewed in the United States on September 6, 2020
Review : Manufacturer (XMARK)- emailed them regarding a bolt issue when placing the original order and they sent out a new one within 2 business days. FAST SHARP AND RELIABLE SERVICE! A+ for that 10/10 in the customer service regardProduct: 5 post movable plate tree- (4 standard size and 1 change plate/small plate size) = 10/10I use this EVERY work out since I am limited to space (see attached picture) in my 8x10 olympic platform. I move this front and back daily depending if I am going to do squats or bench, and the wheels are RELIABLE! They do lock with tennis shoes on (don't recommend locking them if you have just socks or sandles on, the clamps are pretty tight). I don't ever lock the wheels and just move them accordingly per workout.I have 1 pair of 45, 35, 2 pairs of 25's, 1 change plate set and it moves flawlessly (335LBS approx. total including the 2 bars). Smooth, not getting stuck, positioning the unit left / right / front / backThis thing is a nice way to show off your plate set if you are working out from home! I placed the 45 and 35 in front where people can see the plates walking back my garage and its a shiny nice feelingI was comparing the rogue version though the engineering of this base seems much stronger and planted. It does not wobble or squeek and the weights hold perfectly in place and do not move around. Would buy again from XMARK in the future. Incredibly happy with the purchase
Customer
Reviewed in the United States on August 14, 2020
Very simple to put together, it took about 35 minutes. With weight rolls so easy you could stack on anything. Gorgeous finish, this unit not only looks good, but is practical and is made for home use, unless you want to gym Buy 10 of them. The wheels are great unlike other weight trees that have none, these wheels were designed to carry 6 to 700 pounds and move easily. I would give it 15 stars if it was available.
Allison Elvert
Reviewed in the United States on May 24, 2020
Worth every penny! I needed compact and moveable storage for the weight set and XMark weight tree has exceeded my expectations. Heavy duty construction and glides easily when loaded with bars and weights. Also they fixed the spacing issue from earlier reviews so you don’t have to worry about that.What mine is loaded with - 4- 45lb, 2- 35,25,10; 2-10lb, 5lb steel plates; 2- 5lb, 2.5lb change plates plus. 45lb Olympic bar and a 32lb Bella BarAnd still has room for more plates!Extra 5 stars for customer service. Two of the lock nuts were not threaded correctly and snapped two bolts. I might have tried to force them - whoops. Emailed customer service and they had a USPS tracking code for my replacements in less than a day!My one recommendation- put short plate holders vertically over each wheel to hold change plates and collars. Not a negative, but would be that small extra nice to have.
Recommended Products

$39.16

$ 18 .99 $18.99

4.4
Select Option

$107.00

$ 41 .99 $41.99

4.8
Select Option