Your cart is empty.
Your cart is empty.
Say goodbye to welding and painting, zero maintenance cost. GUARANTEED to save you tons of time and money spent on building your fence gate either by hiring a contractor or on your own.
We offer you the EASIEST steel fence gate to install yourself with following benefits:
- Fence Gate in a box with snap-together assembly for easy DIY or on-site setup. Follow our installation manual or video on how to assemble a fence gate. No tools needed thanks to its easy snap-together construction.
- It is sturdy and strongly made and is designed to hold up to harsh elements like UV rays, heat, cold, snow and rain. High quality steel material is hot-dip galvanized to retain strength of steel and resistance to corrosion. High tensile strength: 58,000 PSI (400MPa). Passes 3,500 hours salt spray test. ISO 9001 Certified.
- Completely knocked down packaging minimizes the damages during transportation. Compact size box saves transport and storage spaces and allows loading, unloading and lifting easy at jobsite or at home.
- This Vail gate is compatible with Vail style fence panel to complete your fence project.
- Two top and one bottom rails enhance durability. Easily create an 8’ wide openning double swing fence gate with two gates. This rugged steel fence gate is crafted for superior performance and long life covered under a 1 year manufacturer warranty.
Any questions, please feel free to contact customer service: (866) 392-0808.
Luigi
Reviewed in the United States on May 4, 2024
The media could not be loaded.
Shelly Henderson
Reviewed in the United States on May 15, 2024
I needed C a gate for an existing fence. The one that I bought was a perfect match in design. I was really surprised by the weight of the posts and the individual pieces. This really seems that it will be quite sturdy,
W Wagner
Reviewed in the United States on January 1, 2024
I didn't experience any of the corner braces cracking but I did have to cut all the posts and pickets down to the size of my fence which was a fair amount of cutting and painting the ends to prevent rust. I discovered that the pickets are held in with little plastic latches in the upper and lower cross bars and they break quite easily. This resulted in me using some construction adhesive in the bottom crossbar (each picket has an opening there) to cement all of the pickets in so they wouldn't slide down. Other problems included having trouble getting the cement anchors (brace and anchors added separately to order from this supplier) to grab the sides of the holes I drilled. Maybe my 1/2" anchor holes were too big or the sides of the included anchors were too smooth. The last problem I experienced was with the auto-closing hinges. After loosening the screw adjustment, per the instructions, so I could install them on the posts they no longer had the force to closed the gate after retightening the adjustment screws. I'm thinking I will need to install a closing spring to this gate to force it to close. Now, it seems the gate will not latch shut. I'm not sure if the advent of cold weather has warped the gate or what has gotten it out of alignment.Overall, I like this gate and I made it fit to my fence opening with some cutting but that took extra work and the use of spacer material and extra U bolts to clamp the posts to my existing fence for sturdiness.
Sue A Spychala
Reviewed in the United States on April 8, 2024
Bought fence as well. Overall a very nice product but the assembly instructions could use some accompanying text to explain the assembly steps.
DJ Colt
Reviewed in the United States on October 31, 2023
I almost never provide reviews.But the Vail Gate built by XCEL MFG absolutely Exceeded my expectations.The gate is superbly designed, with quality materials, powder coated and easy to assemble, took me a few hours because I cut gate size down. There aren’t any assembly instructions, don’t believe they are needed.Every part is individually wrapped and protected from damage during shipment, that’s important, we’ve all gotten damaged materials.A little assembly advice, put a work blanket on work bench, use a rubber mallet recommended by Mfg, pre drill all holes, it helps keep everything square and tight, use #8 #10 hand wrenches to tighten things down, don’t use pneumatic power tools on cast gate corners. I made that mistake and broke one corner, XCEL MFG customer service replaced corner promptly, no problem. 😉I used much larger lag screws on hinges, believe they will hold up better than the TS15 Tek Screws provided.Should you decide to cut gate down, it’s important to assemble gate initially so you get accurate measurements.When installing vertical pickets initially, turn them a quarter turn, so they don’t lock in the (Thru rail keepers), you’ll need to disassemble gate to cut it down.The attention to detail is second to none, and customer service is amazing!I couldn’t be happierEd
Sebastian
Reviewed in the United States on July 4, 2022
The hinged side of the gate was hung on a cinder block wall using three concrete anchors and 5/16” x 4” construction lag screws with button heads and ceramic coating. The latch side of the gate was attached to the side of the garage using four 5/16” x 3” construction lag screws with button heads and ceramic coating.the gate is solid and spring hinges work well. My only criticism is with the instruction sheet. It could and should be improved. Aside from that, the gate is excellent quality for money.
Wendy
Reviewed in the United States on March 10, 2022
This product was as advertised, a very good value. Takes awhile to out together, but worth it! Takes awhile to out together, but worth it!
Jessica Fujimoto
Reviewed in the United States on November 2, 2020
After taking 8 hours to hang this gate, I had to size it to fit my opening; the gate sagged so much it was worse than the gate I replaced. I am in manufacturing, the design of your hinge, being plastic is not rigid enough to support the hang. The gate was dragging, after leaving an inch, so I moved it up another 1" at considerable time, and it still dragged. The hinges are not strong enough to hold the gate's weight. I waited three weeks or so to get to this project, it's easy enough to assemble if you are using the gate at the same width it comes, but if you have to adjust the size, it's a different story. After hanging it, I was called out of town for 5 weeks, so the return period has lapsed, due to no fault of my own. If you have no limitations on how high the bottom of the gate can be, this gate might work. However, if you want to keep critters out, I wouldn't chance that this gate won't drag the ground.
Recommended Products
$67.99
$ 32 .99 $32.99
$258.40
$ 99 .00 $99.00