Your cart is empty.
Your cart is empty.Sherlock Wideboy features extra-strength wing nut design to adjust and hold the frame arms. Simply loosen wingnuts, slide the arms to the desired width, insert the roller cover, then tighten wingnuts. Works with 12" to 18" covers and R087 and R088 endcaps. Rigid tubular steel resists pressure for excellent results on floors, walls, or ceilings. The Wooster Brush Company has been manufacturing innovative, high-performance painting tools right out of Wooster, Ohio USA since 1851. Our trade names include Ultra/Pro, Advantage, Yachtsman, Shortcut paintbrushes; Super/Fab, Super Doo-Z roller covers; Sherlock frames and extension poles; Jumbo-Koter minirollers; and Prep Crew surface prep tools. You can feel confident knowing Wooster is the name behind your painting tools.
Joe Timm
Reviewed in the United States on April 18, 2021
Basic and well made like all Wooster products. Easily adjustable and quick disassembly for cleaning. Does the job as always. Will buy again. Made in the USA, as it should be. Buy American.
Placeholder
Reviewed in the United States on August 10, 2020
I love this roller frame. This makes the job go by so much faster and it is adjustable so I can take 18 and 12 inch rollers. Installing the roller is simple. Just loosen the wing nuts pull the legs out and push back in. I painted a living room, dinning room ceiling and a 2 bed rooms in under 2 hours. Very happy with this purchase
Matt R
Reviewed in the United States on December 26, 2020
This thing really speeds up painting. We purchased a home and wanted to repaint the whole thing. I had some 9" rollers but moving up to 18" allowed quite a bit more coverage. The arms end up slinging quite a bit more paint and eventually loosen some, but it was worth the trouble. Several people helping us wanted to buy this after seeing it in use. It's solid and well built, with a fairly simple build that would allow easy replacement of damaged or lost parts.
Joel
Reviewed in Canada on December 16, 2020
Good product so satisfied
AZJ
Reviewed in the United States on April 22, 2020
About 1/2 way done on our flat roof, works fine, will loosen a little, no big deal though
jon
Reviewed in Canada on August 20, 2019
Use wooster refills they seem to work the best with this handle.
RedPill
Reviewed in the United States on August 19, 2019
Don't use a standard roller to paint walls and ceilings. I painted most of my house with one--toward the end I discovered there was such a thing as an 18" roller. It makes an enormous difference in how long it takes to finish a room. You only need a 9" roller if you have some tight spaces.This frame held up well. The only adjustment in technique you have to make is you have to cut in wider than with a normal roller because the frame on this is on both ends. On the edges if you scrape the adjoining wall, the frame will leave a mark, so you have to be a bit more careful to avoid it. When adjusting the wing nuts to hold the roller, be sure to leave a fraction of an inch so the roller rotation is not impeded from the frame being too tight against the roller on the sides.To do a wall with a 8' height, load up your roller with paint--I'm using Regal Select. From your last column, start in the middle of the wall and go up and down just an inch or so away. Work it in just a few inches, and maybe some to the other side, but don't spread it around too thin because you'll get an uneven, unprofessional looking finish when you have light reflecting towards you. While this technique uses more paint than a very thinly applied coat, the result is a high quality finish, and the paint should last longer before you need to repaint. I suppose you could get by with one coat if the undercoat is the same or very similar color, but if using a very dissimilar color shows through, that should tell you that one coat over any color is really not optimal nor thick enough.
stan
Reviewed in the United States on July 27, 2019
Wooster products are top of the line!! Easy to clean and reuse. Add a spray like finish !!
Client d'
Reviewed in Canada on November 2, 2019
Plancher époxy. Le rouleau ne reste pas toujours en place. Le support s élargit durant le travail
Moses Kaulaity
Reviewed in Canada on March 26, 2018
My first time singing a roller like this was a blast. I highly recommend them with the 18in brushes. Easier to keep clean, even pressure and distribution of paint. Trickier than normal near the perpendicular walls, but if you cut in and back roll a little wider, then it's not an issue.
Stefan
Reviewed in the United States on March 24, 2018
This roller frame is lightweight wich is very important when using every day and strong too.The reason to give only 4 stars is that the bolts are too short,I can't use them but got longer ones.Many people complained about that but seems that the engineers from wooster doesn't read these reviews on Amazon .Cheap postage to Europe
Customer
Reviewed in Canada on July 5, 2016
Good product - exactly as described and works well with wider rollers
Scott
Reviewed in the United States on January 16, 2016
Like the title says, I bought this to roll sealant on my concrete driveway. I used this for 3-4 days total sealing concrete (I have 10000 ft^2 of concrete and applied two coats). The sealant is a polymer that built up on the roller. I cleaned it off at the end of the day using gas. I also had the pole extended halfway during most of the job. This thing worked great. I have no complaints.
Recommended Products
