Shopping Cart

Your cart is empty.

Your cart is empty.

West Biking Bike Carrier Rack, 310 LB Capacity Solid Bearings Universal Adjustable Bicycle Luggage Cargo Rack,Cycling Equipment Stand Footstock

Free shipping on orders over $29.99

$45.99

$ 20 .99 $20.99

In Stock

1.Style:Cargo


About this item

  • ๐—”๐—น๐˜‚๐—บ๐—ถ๐—ป๐˜‚๐—บ ๐—”๐—น๐—น๐—ผ๐˜† + ๐—ฆ๐—ผ๐—น๐—ถ๐—ฑ ๐—ฆ๐˜๐—ฒ๐—ฒ๐—น ๐—Ÿ๐—ผ๐—ฎ๐—ฑ ๐—•๐—ฒ๐—ฎ๐—ฟ๐—ถ๐—ป๐—ด - Aircraft grade aluminum, firm and durable. Solid axle, strong load (140kg-180kg capacity), essential for long rides. NOTE: After you have used it for a period of time, please check whether the screws in various parts are loose
  • ๐—จ๐—ป๐—ถ๐˜ƒ๐—ฒ๐—ฟ๐˜€๐—ฎ๐—น ๐—ฆ๐—ต๐—ฒ๐—น๐—ณ (๐—™๐—ถ๐˜๐˜€ ๐Ÿฎ๐Ÿฌ ๐—ง๐—ผ ๐Ÿณ๐Ÿฏ.๐Ÿฒ ๐—–๐— ) - This bike cargo rack fit for most bikes, such as road bikes, mountain bikes, thick bikes, etc. (The children's bike and the Trek Verve cannot be used.) Comes with installation tools and instructions, easy to install
  • ๐—”๐—ฑ๐—ท๐˜‚๐˜€๐˜๐—ฎ๐—ฏ๐—น๐—ฒ ๐—ฆ๐—ต๐—ฒ๐—น๐—ณ - Height adjustable (front stent - 20 - 31 cm, rear stent: 35 - 52 cm), front and rear adjustable. The diameter attached to the seat post is 3cm
  • ๐Ÿฏ-๐—ฃ๐—ผ๐—ถ๐—ป๐˜ ๐—Ÿ๐—ผ๐—ฎ๐—ฑ ๐—•๐—ฒ๐—ฎ๐—ฟ๐—ถ๐—ป๐—ด ๐——๐—ฒ๐˜€๐—ถ๐—ด๐—ป - more uniform load bearing. Detachable reflector, safer and more comfortable
  • ๐—˜๐˜…๐˜๐—ฒ๐—ป๐—ฑ ๐—™๐—น๐—ฎ๐—ป๐—ธ๐˜€ - The extended protective flanks protect your bag from the spokes. No more worry about your bag getting caught in the spokes !
  • ๐—ฆ๐˜๐—ฎ๐—ถ๐—ป๐—น๐—ฒ๐˜€๐˜€ ๐—ฆ๐˜๐—ฒ๐—ฒ๐—น ๐—ฆ๐—ต๐—ผ๐—ฐ๐—ธ-๐—ฃ๐—ฟ๐—ผ๐—ผ๐—ณ ๐—ฆ๐—ฐ๐—ฟ๐—ฒ๐˜„๐˜€ - The inner ring is held together with a shockproof nut layer which prevents the rack from shaking during rides, Stainless steel holding screws are more durable
  • ๐—”๐—ฑ๐—ท๐˜‚๐˜€๐˜๐—ฎ๐—ฏ๐—น๐—ฒ ๐—ฆ๐˜‚๐—ฝ๐—ฝ๐—ผ๐—ฟ๐˜ ๐—ฅ๐—ผ๐—ฑ๐˜€ - Our rear bike rack have many adjustable designs and fits different sizes of bikes. Support rods can be adjusted in length from 9.7"-14". The width of bicycle tires should not exceed 4.6". It fits fat bikes
  • ๐—ฅ๐—ฒ๐—พ๐˜‚๐—ถ๐—ฟ๐—ฒ๐˜€ ๐Ÿฎ.๐Ÿฏ" ๐—›๐—ฒ๐—ถ๐—ด๐—ต๐˜ ๐—ฎ๐—ป๐—ฑ ๐Ÿฏ๐Ÿฏ๐—บ๐—บ ๐—ฆ๐—ฒ๐—ฎ๐˜ ๐—ฃ๐—ผ๐˜€๐˜ - The main bracket needs a height of 2.3" attached to the seat pole. If your seat pole is at the lowest height, please confirm that you are still suitable for riding after raising 2.3". This rack fits seat post diameter of 33mm, if the clamp is too large for your seat post. You can use rubber gasket to increase the thickness of the seat post
  • ๐—ฆ๐—ฎ๐—ณ๐—ฒ๐˜๐˜† ๐—ฅ๐—ฒ๐—ณ๐—น๐—ฒ๐—ฐ๐˜๐—ผ๐—ฟ - The design details of the Red rear reflector increase visibility in low light conditions, which can increase the safety factor of driving
  • NOTE - After you have used it for a period of time, please check whether the screws in various parts are loose. If there is any product problem please contact us, we will solve it for you within 24 hours!



Product Description

Carrier Rack

High Quality Bike Cargo Rack Rear Seat With 310LB Load-Bearing

Cycling, as a healthy and convenient form of transport, we believe cycling should be a regular part of most people's lives. That's why West Biking concentrates on creating innovative equipment for recreational, commuting, and touring cyclists ! ! !

Delicate Appearance Design Smooth lines and matte black design,give you a simple and elegant riding experience.

Product detail
Product instruction
product instruction2
not fit some bike

Roy
Reviewed in the United States on March 8, 2025
Sorry for being so late getting back to you it was in great condition and you sent it fast thank you so much Roy
Boris123456
Reviewed in the United Kingdom on September 18, 2024
Seems like a good product. Nice and strong. Took about 30 minutes to assemble. A bit fiddly. Not helped by really rubbish instructions. The video was more useful, but in neither do they specify which one of the three types of bolt you're to use in the various places. Some guesswork required. Used once so far as a seat to take my 30kg son to school. Seems good.
Dusty White
Reviewed in the United States on February 15, 2024
No lie: I had to watch a videoโ€”at .25x speedโ€”really, and read the manual, and find some other video, and look on the Amazon reviews for clues. This is not *hard* to put together, but if you don't know how to put it together it is like rocket science. The manual is (almost) useless, and the "official video" shows a different product! But even so, if you have half an hour and a LOT of patience, once you get **successfully** about ten minutes into the process, everything starts to make sense.PRO TIP (hindsight): just focus on one side. The long trust go in the back and the short ones go up front. The rubber pads go against your bike frame. The rest is just watching videos.Okay, so (if you have read this far), since you have it mostly in placeโ€”assemble it 90% tightened down, adjust it, and then go back and clamp it down hard. After that part, this is really strong. In hindsight it is well worth the pita installation if you do it carefully because the flimsiness of assembly really allows you to customize the fit. Once you lock it down you could probably stand on it (but please don't). This allows me to carry a LOT more weight on the bike, which makes the road bike far more useful for short trips.As to "size," think "large brown paper grocery bag" (the kind you double-bag) can "mostly" fit on this. Or you could just lash a square milk crate to this thing and have a huge back basket. In any case, yeah, it's great once you get it installed and kick it once or twice for being a pita.
SomethingWitty
Reviewed in the United States on October 7, 2024
I love this rack on my fat tire e-bike. I have the Hiboy P6 with the 4" knobby tires. I tried another rack first but that one didn't fit. This one fits just right and is built solid! It's rated to hold more weight than my bike, which is a huge plus. The only downside is the rear reflector. I have a tail light/brake light that I'd like to mount on the back of it, but I'm still figuring out if I can mount it there. I wish that there was a mount in the back that I could just bolt the light up to. Installation instructions weren't great, but the install process is fairly intuitive. Entire install process maybe took 30-45 min.
Albert
Reviewed in the United States on August 16, 2022
First thing: find a good image of the completed bike carrier rack and then throw the directions away. They're useless. And know ahead of time that you'll have lots of leftover bolts, washers, and nuts when you're through. There's extra on purpose. There are varying lengths of the bolts depending on the clearance you have between the rack and the bike. The needed tools are provided so don't worry about that. Have a good image of the finished product that you can view in detail on your phone or a tablet in order to see what the completed project SHOULD look like when complete; the directions don't provide enough detail about each section of the rack. But it is VERY sturdy and looks good! You'll probably want to find a good quality bag to go with it to carry your stuff. I got the Roswheel 14892 Bicycle Back Seat Cargo Trunk. Looks good and works perfectly with the rack.
JJW
Reviewed in the United States on June 18, 2020
So far I do love this rack. It is clearly very sturdy and durable. Actual installation is fairly easy once you assemble everything as far as the instructions assume when you receive the item. Not to beat a dead horse, but the instructions ("instruction") are hilarious and essentially useless. Like it would have killed them to pay a college student $50 to translate and/or write them. Moreover, the photos aren't detailed enough to answer a couple important assembly questions one will have. The packaging is pretty comical, and one of the hardware bags had a rip in it, so I had bolts and washers cascading all over as I began removing the bubble wrap from everything. I wondered whether I received one that had been a return or at least previously opened. Also, the reflector that came with it was broken. I didn't bother super gluing it back together as my existing reflector happened to fit on the bracket. I think most people would have just returned the item because of that. Initial assembly was pretty complicated because there weren't even numbers of any of the hardware items. I assumed some of the items were extra, which was only true of the lock nuts and washers. The hex cap bolts didn't make a lot of sense in quantities, and I had to mix and match a bit to figure out which length I should use for everything. There were 8 bolts that were really too long for any spot they were needed, so those were the ones I used to secure the bed of the rack to the supports. Bolts sticking out underneath/inside that area shouldn't be a problem. I do recommend that you just buy a new set of hex cap bolts that are overall a bit shorter than the ones included. I might do that eventually and swap them all out. Once I got everything assembled to the level the instructions assume you receive it, then the remaining installation was pretty easy. The only question is which side to install the two main support arms. They have a rail for attaching the extra center support, and it is not symmetrically placed. Picking the right side does seem to matter. I think neither option is actually good, as that extra arm doesn't really line up properly no matter which side the main arm is on. Depending on how far back and how high you place the main tray, that extra arm doesn't really seat properly once tightened. I considered not installing that at all, since I don't think it is really necessary. I would definitely install it if you do plan to load the rack up with 100 pounds of gear. I expect to have 20 pounds of gear on it at most. Now it is installed and in use on a Cannondale Treadwell 2.
MGB
Reviewed in Italy on November 7, 2019
Parrebbe precisione e soliditร  teutonica.
Tony
Reviewed in Canada on November 28, 2019
This is sturdy, has multiple attachment points, is easy enough to assemble (although the instructions were of no use). It is well made, and big enough to fit my fat bike with no trouble or modification. It is also more than capable of supporting my weight once installed. I wanted to make sure it wouldn't break once on the road so I stood on it. Didn't even budge. I would give it a 4.5 for being an overall good amazon purchase. I would highly recommend this.
bob
Reviewed in Spain on July 27, 2018
sI NO MODIFICO EL COMENTARIO AL REGRESAR EL CAMINO DE SANTIAGO ES PORQUE RESISTIO BIEN EL PORTABULTOS, CON 25 O 30 KILOS DE PESO...TRAE TODAS LAS HERRAMIENTAS Y DICE QUE SOPORTA HASTA UNA PERSONA DETRAS MONTADA 70 U 80 KILOGRAMOS...LA VERDAD SE VE FUERTE, PERO AL ESTAR AGARRADO A LA TIJA TODO DEPENDERA DE ELLA NO?
SOLISZT
Reviewed in France on November 8, 2018
Semble robuste. Le montage demande de l'intuition et de l'astuce : idรฉal pour les amateurs de Lego et de Mรฉcano. Le guide de montage est en anglais (se munir d'un traducteur en ligne) et les illustrations sont confuses. Une fois la structure en place, la satisfaction est lร .
Recommended Products

$17.79

$ 8 .99 $8.99

4.7
Select Option

$64.95

$ 30 .99 $30.99

4.7
Select Option

$12.99

$ 5 .99 $5.99

4.8
Select Option