Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #42 in Powerline Network Adapters
" Note: This PoE injector only used for 10/100Mbps network.
The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power.
The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port.
This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch.
Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines.
To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.
Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems.
The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 500mA and high voltages exceeding 50Vdc.
Specifications
2 RJ45 Ethernet ports
48V 0.5A power output,
Power feed: V+ 4,5; V- 7,8; Date: 1,2, 3,6
Data rate: 10\100Mbps
Deliver power up to about 328.1 feet(100 meters)
Support 100-240VAC voltage input
What in Box?
1 x US wallmount PoE injector "
Toni L Berger
Reviewed in the United States on February 25, 2025
The product arrived. Had no instructions. Did not work.Not sure if I am doing something wrong, but i swapped cables, tried everything. Did not see a place I can go to either for help.
zomaine
Reviewed in the United States on September 26, 2024
It only power 1 item I got it to connect 2 wifi thru poe but it only supports power to first item the 2nd connection didn't receive any power. Very easy to connect,nice size
Ray Grace
Reviewed in the United States on August 29, 2024
Purchased for an older TP Link Access Point and worked perfectly.
NotByBreadAlone
Reviewed in Canada on February 2, 2024
Great working product. Has worked since the day I plugged it in. Have only used one of the two in the pack so far.
Customer
Reviewed in the United States on December 20, 2024
nice from factor. used to replace a defective POW injector. this one is better bc it fits up against the outlrt.
Marcelo_Cheetah1
Reviewed in the United States on November 23, 2024
Works well with my Polycom vvx311 iP phone
Mahmoud
Reviewed in Canada on August 17, 2023
Not strong
Ashby Technologies
Reviewed in the United States on March 21, 2023
It was my first time trying to use PoE. It is certainly easy to use - pretty much plug and play - and the price was reasonable, but it just didn't work... I was using a converter on the other end (from a different brand) to go back to a barrel jack, but the device just wouldn't power on.Plugged it back in with a standard plug, and it worked fine. V and everything lined up, it was specifically a PoE-capable device so I was left scratching my head.I ended up calling it a day and buying an extension cord. I'm giving it 4 stars because if it works for you, it seems like a great product by everything that I saw (build quality, ease of use, cables fit well and retained correctly), but it just didn't work for me.I'm assuming they aren't just selling a product that doesn't work, so whether I got a defective one, or a defective adapter on the other end, or a bad cable, I really can't say, but I was just needing the project done so I never did find out.
Marc Cioce
Reviewed in Canada on January 17, 2023
Work well
Chris
Reviewed in Canada on September 5, 2022
As others have mentioned, these are unequivocally NOT 802.3af PoE injectors. What they are is old-fashioned passive PoE injectors that support 100mbit/s data speeds running on two twisted pairs and expect the outer pairs to be unused.Having said that, the 802.3af standard was intended to make 802.3af power-receivers backwards-compatible with passive PoE. That means that you CAN use this 48V passive injector to provide power to an 802.3af device or splitter as long as you are happy with 100mbit/s data speeds.As passive PoE injectors, they're actually quite decent. They're compact, functional and very-reasonably priced. If it weren't for the deceptive product name and description, I would have given them 5 stars.The major downsides to passive PoE (as compared to 802.3af) are of course the incompatibility with gigabit and faster networking, the increased fire hazard, and the fact that if you connect the "Data & Power" port on one of these to an non-PoE device then you're likely to damage the device or short out the injector.
Just my .02
Reviewed in the United States on October 16, 2022
Initially I was going to return this as my procrastination prevented me from even testing if it worked. After finally buying a POE splitter I can confirm it does.It's only 10/100, which I don't even remember if I had read that, but for my needs gigabit is not even an option for me right now.I'm in a rural area using lte for my internet (and communication) needs. I have a few devices for this, but one in particular is the only one that works indoors, the rest have to be placed outside, which gives me constant anxiety. This injector is allowing me to place things outside, in a protected box, without the need of an extension cord that runs the length of my home just inviting the for a disaster in of itself.I placed a weatherproof box outside, installed an lte device attached to a poe splitter, ran a concealed cable inside straight to this plug. Viola, power! My speeds are criminally low, but so much better reception outside, and my internal network is run by other devices so speed isn't an issue on lan.Things I can't speak to:Speed- it works great for my rural needs.Power- it provides just enough to run a netgear M1, but nothing else (attached a travel router to the M1 and it didn't receive any power. To be honest, I can't remember if it does on a regular plug)The 48v thing?- This goes to a poe splitter that apparently handles that.Overall, a good choice for simple devices. Low footprint is definitely a plus.
Brian
Reviewed in the United States on March 8, 2021
They work fine for standard 48v POE devices. You can't use it for 24v devices, there are other POE Plugs for that, just search it and you will find. The difference is simple; the 802.3af/at standard requires the port to test for power requirement BEFORE applying power, as such, power is NOT always available at the port. Passive POE is not really 802.3af/at compliant because it allows for power to be present at the port at all times. I prefer the safeguard of "test before application" so I never use passive POE for mission critical devices like AP's or VOIP Phones, Security Cams, etc. In fact, for my commercial and industrial installations I ONLY use 48v POE devices that are 802.3af/at compliant and refrain from passive application of power. I use these specific Plugs for quick replacement of manufacturer POE injectors which have failed and cannot be replaced easily overnight or fast ship. I keep 48v and 24v models on the shelf.
Sugar Ray
Reviewed in Canada on October 19, 2020
Great piece of technology for anyone without a POE switch. Test run well. No complaints so far
Recommended Products
