Een normale midi-tower past er net (niet) in. Het past alleen in de uiterste stand en dan heb je geen millimeter over (kijk dus duit voor krassen op de behuizing).Als die dan hangt, is het staal veel te zwak om de computer te dragen. De steun buigt enorm door. Prima geschikt voor hele kleine en lichte computers, maar een midi-tower van 9 kg hang ik hier niet in.

i did hang it under my desk but above my desk and under my shelfing as my dog like going under my desk and work perfect above too and give me more room on my desk

This product is quality made with numerous mounting options and ways to secure your computer. The steel and bolts are heavy-duty and heavy gauge. Importantly, you can swivel the mount to easily expose the slots for hooking up your monitor and power cords. You cannot swivel it 360 degrees, but enough to expose and get to the connections. The swivel feature is essential for tight under desk mounts where you only have front access.

The idea is cool depending on the desk might be easy might be hard mines was middle difficulty but the holder didnt open wide enough to support my tower so i have it sorta on but but not all the way but held with double side tape , i think next revisions make it a little wider maybe about 2 inches MAX other than that sturdy the screws werent to long just right so they didnt pop out the other side of my desk

Facil instalación y cumple lo que promete

The media could not be loaded.

I have a stand up adjustable desk. This was the perfect solution. Easy installation and solved the problem I had with where to store the PC. Looks sleek as well.

This VIVO desktop mount was everything I could have asked for! I RARELY write reviews, but when a product or service over-delivers like this one I need to spread the word. This product, right out of the box fit my workstation desktop computer perfectly. The range of adjustment and weight capacity are perfect for modern PCs. My Lenovo P348 was kind of in the middle of the range accommodation. The instructions are great, it comes with under-desk and wall mounting hardware. Now my mini CAD station is contained and ready to roll from room to room! This saved me about 6 hours of designing, metal fabricating and painting my own mount system...and it swivels! (great for making connections to the back of the machine). I couldn't be more satisfied... what a deal!! and delivered same day for free (with PRIME).

Recently purchased a standing desk and didn't want the PC tower to take up room on the desk surface. This under desk mount did the trick and allows the PC to rotate for easy access to the rear connections when needed. I found that my PC tower was too short so I improvised by stuffing some foam on the top to ensure a more secure, snug fit. It's a quality made product and I'd buy it again.

It’s fits perfectly under my standing desk. If you are using a motorized standing desk, take in consideration the distance between your computer unit top and the motor rod.

Muy buen material y fácil de armar e igualmente nstalar pero lo único malo es que mi gabinete es un poco más ancho de los demás y batalle para meter el GabinetePero lo recomiendo al 100%

Fist of all, this mount does exactly what it's designed to do, which is to hold a CPU within a specified size range. As far as I could tell from my own measurements, Vivo's specifications accurately reflect the size CPU case this mount will accommodate. Frankly, most modern CPU's will fit this mount with room to spare. CPU cases have shrunk considerably in recent years, the major exception being gaming PCs, in which case a more expensive mount is warranted. It is unfortunate that so many buyers have chosen to vent their anger at having ordered the wrong mount by giving it mediocre ratings. To echo one of the other reviews, don't drill into your desk until you've checked to see that your CPU will fit this mount. However, if you do, please don't blame Vivo for your mistake. It isn't fair to those for whom this mount is perfect.That the height isn't continuously adjustable should not be an issue for most. Unless the intent is to mount this in an SUV and take it off-road, a properly seated CPU isn't going to go anywhere. The top of the CPU is held in place by a clamp from the side and as long as the clamp is made snug with the CPU, not even a minor earthquake should shake it loose. I doubt the internal components of the CPU are mounted as securely. Potential buyers shouldn't be deterred by by reports of a gap between the case and the top of the mount. If your CPU's dimensions will fit this mount, this is an incredibly solid mount and a real bargain.Before I proceed, let me state for the record that my computer is an iMac, so there is no CPU case. What I have is a CyberPower 1500VA uninterruptible power supply, which is similar in size and shape to that of a CPU case. In fact, it's heavier than most CPUs, but still well-within specs for this mount. I have a small desk with no space available underneath it, but a lot of space behind it, so this mount is a perfect way to get the UPS out of the way, yet keep it accessible for plugging in a multitude of components. The top is wider that the available space, even set at the minimum size, but I was able to mount it high enough on the back of the desk that it clears the window sill, fitting perfectly. The top of the mount was a perfect place to mount a Vivo dual-arm VESA mount, and all I had to do was to remove the existing, rotating bracket and use the existing holes for the attachment. It was as if they designed it with that in mind.Overall, I can find no fault with the construction of the mount. It's designed for multiple points of attachment to a desk, including mounting it under a desk, and the mount is very solid and sturdy. Adjustments for the size of the CPU are very easy to make and the mount should accommodate a wide variety of CPU cases (or UPS units), except perhaps for do-it-yourself computers built in oversize cases, and oversize gaming PC's, especially those with liquid cooling. Even with the modifications I made to attach a dual VESA stand to the mount and to install a UPS, installation took less than an hour using a cordless drill, some driver bits and a set of wrenches. I could not be happier with the simplicity, versatility and sturdiness of the design