Your cart is empty.
Your cart is empty.Product Description
VEVOR 3-In-1 Sheet Metal Brake
Our sheet metal machine combines rolling, bending, and shearing functions into one compact unit. It allows you to adjust the roller position with a knob, extend up to 90 degrees, and cut through various sheet materials.
Crafted with care to be your enduring workhorse. This shear press brake is built with carefully selected materials to deliver optimal performance. Industrial-grade materials ensure durability and resistance to wear, ensuring a long lifespan.
The upper bending tool and lower die module are constructed from sturdy 0.2-inch/5 mm thick #45 material. It comes with five different-sized blades: 1", 2 x 2", 3", and 4", ensuring effortless bending of low-carbon steel and aluminum.
The roller of our sheet metal brake is equipped with precise curvature adjustment technology, allowing you to effortlessly create a wide array of cylindrical and tapered workpieces and result in flawlessly smooth sheet metal.
Our 3-in-1 combination sheet metal machine enables you to easily handle various sheet metal processing requirements and supports sheet materials with 20 GA / 1 mm Max. Thicknesses, 12 in /305 mm Max. Width and also offers a 90-degree bending angle.
Steve chasse
Reviewed in Canada on February 13, 2025
Perfect. Work well. Very nice addition in my shop.
Grizzled Gringo
Reviewed in the United States on September 11, 2024
I wouldn’t recommend on 20g mild sheet. It will bend it but hard to cut or roll. You have to rea adjust cutter every cut. It’s a decent piece of equipment for lighter gauge maybe 24. It’s a shame didn’t work better on 20g. It was low carbon so not super hard. Vevor has some nice budget equipment but this is pretty optimistic on the 20g rating unless it’s tin (ducting sheet).
David S.
Reviewed in Canada on August 31, 2024
I'm not using this as a professional or in a shop. It's for personal use and will mostly be used for bending aluminum or lighter metals. I've used all parts of it now being the shear, bending brake and roller. Works fine for me..
John
Reviewed in the United States on June 26, 2024
This little machine will cut 20ga stainless steel. You do have to bolt it down solidly and finely adjust the cutting head to have as little of tolerance as possible also clamp / secure the piece you are cutting then stand on the metal on the deck and pull up as hard as you can maybe 150LBS of force, wear gloves the sharp corner on the handle will cut you with no gloves and then and only then if all the stars align and your strength does not give out and if luck is on your side then it will cut.So, it works if you take time and re-adjust the head for each cut. The bender works quite well. I have not used the roller yet.
Jos Blo
Reviewed in Canada on March 4, 2024
The shipping crate was broken and parts were loose in it.I am sorry about this purchase.I have photos but I cannot submit them.
RAB
Reviewed in the United States on October 3, 2024
The only reason I did't return this is that it weighs close to 90 pounds and the shipping box was destroyed! I tried to get a partial refund but there wasn't an option to do so. Parts were bent beyond use and the unit was completely non-functional. This was NOT shipping damage. It left the manufacturer this way!!! UNTESTED!!!!!!! The handle would not turn completely around. It would go from the 8:00 o'clock position to the 4:00 position and jam!!! (Moving Clockwise ). The adjustment knobs were bent so much that they were un-usable. The photos do not indicate how bad they were to use. The photo of the screw and nut on the back side is what I finally do to make the unit work. I replaced the screw on the front with a much smaller 1/4 inch bolt and a locking nut. This holds the shear blade in position and allows the handle to turn 360 degrees. The unit is now functional but it cost me OVER $100 in replacement parts and modifications to get it working. I didn't bother trying to work with the manufacture because they are total crap!!! It was not worth the frustration!!! DONT'T BUY THIS!!! Pay more money and get something of quality from a different manufacture!!!
Willliam B.
Reviewed in the United States on April 30, 2024
I used it to roll some patch panels for a bronco I am repairing. Works well.
Donald Dayton
Reviewed in the United States on April 29, 2024
Worked great for a small project I was working on; plan on using it a bunch more
Greg
Reviewed in the United States on April 26, 2024
They really shouldn’t bother assembling this thing before shipping it out, you’re going to need to disassemble the entire thing to begin with. Everything is coated in machine oil, which I expected, but they used machine oil to lubricate everything also, which made the machine function extremely poorly. When disassembled I had to debur and chamfer a lot of things also to smooth out the operation. Greased all of the gearing and movement surfaces. Do not use a solvent based cleaner, the machine is not powder coated. It has a really cheap almost spray paint finish that’s applied over the original reddish finish “meaning the machine is produced elsewhere, painted and rebranded” the blue paint was coming off just wiping it down with denatured alcohol. The machine was shipped in a wooden crate, luckily bolted to the wooden crate, as the shipper delivered it upside down, cause they obviously couldn’t tell the pallet feet go down. The machine was pretty banged up, the finish was chipped and scratched on pretty much every surface ac the pic shows some may have been from shipping but the other half was obviously done at the factory as the chips/scratches had the same machine oil coating them. Overall it works well but the fact I need to spend 3 hours on cleaning and disassembly/reassembly, along with the condition of the machine I’m knocking it down to 2 stars.
Ray Sulich Jr.
Reviewed in the United States on April 22, 2024
This is one of several Vevor tools I've recently purchased. They are very well constructed and accomplish the tasks they are designed to do. I didn't need a full sized metal break or roller and certainly didn't want to take up all the space full sized metal working tools take. This tool is really nice, easy to use and takes next to no room on my work bench.
Mech_e
Reviewed in the United States on April 12, 2024
Received it within the shipping dates. Once cleaned, I sheared, bent and rolled pieces of sheet metal.
Recommended Products
$849.90
$ 99 .00 $99.00