Your cart is empty.
Your cart is empty. Specifications
Pipe Diameter Range :10mm-25mm
Bending Formers (inc.): 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1"
Bending Formers (mm): 10mm,12mm,14mm,16mm,19mm, 22mm, 25mm
External Diameter of Half Circle: 100mm,119mm,139mm,159mm,179mm,225mm,225mm
Package Dimensions : 540 x 210 x 160mm (21.26'' x 8.27'' x 6.30'')
Wall Thickness of Pipe: 0.8-2.0 mm
Total Length (w/ Handle on): 86cm (33.5")
Net Weight: 23kg (50.7lbs)
Gross Weight: 25kg (55.1lbs)
Package content
1 x Main Part of Manual Tube Bender
7 x Half-circle Bending Molds
7 x Related Bending Formers
1 x User Manual
Austin Yearwood
Reviewed in the United States on March 8, 2025
Very nice I have no complaints. Is as listed
Alexandru
Reviewed in the United States on March 8, 2025
good quality fast delivery
Tsiii
Reviewed in the United States on February 8, 2025
First thing is first, the cast metal die cracked on me and failed on the third tube that I tried to bend (1 inch stainless). Other things to note, the hole that holds the tube is generally oversized and allows the tube to sit at an angle when bending. Not a big issue for bends less than 180 degrees, but if you are looking for the full 180, this becomes a problem. If you're looking to be able to bend softer metals at angles of less than 150 degrees or so, this will be fine. If you want harder materials or larger tubes, spend a little more and get something better.
J McRae
Reviewed in Canada on February 23, 2025
Very solid, but dies are not properly sized allowing pipe to distort and edges of die press to gouge pipe. In addition, pipe clamp is oversized not holding pipe at proper angle making it impossible to get full 180 bend (lose about 10 degrees of bend) and gouges pipe due to angle. See photos of 1/2 copper pipe.Better quality control in the factory, and it would be a good product.
Happerstein
Reviewed in Canada on February 1, 2025
Pipe thumb needs to be open to swing it away to allow tube to be retrieved. Handle is too short for larger diameters. Tightening collar needs serrations to allow easier turning. Needs an angle indicator.
M.Moto
Reviewed in Germany on July 26, 2024
Versucht 22m Edelstahlrohr zu biegen. Leider wird das Rohr platt gedrückt und es entstehen sehr starke Kerben. Absolut nicht akzeptabel. Rückgabe ist nicht mehr möglich. Jetzt hat man 15kg Schrott rumstehen. Schade...
maybe
Reviewed in the United States on February 3, 2024
Shipped with duplicate 22mm bending dies and no 25mm bending die so I can't use it on 1" OD pipe which is what I really needed it for. I have contacted Vevor they claim to have responded with a ticket # and information, but nothing is yet available. This will be returned if not rectified. It appears it should do the job with the right parts. Vevor customer service is an endless unproductive loop. I ended up returning it to Amazon. I hope the 2nd one has all the correct parts.
paul fortin
Reviewed in Canada on December 5, 2024
En laissant des rayures sur le tuyau.
Josh and Alison Prater
Reviewed in the United States on April 9, 2024
This is better quality than I needed or anticipated. I bought to try to make more consistent bends to my 0.25” round bar for wire frame Christmas light as I thought it would be faster and more consistent than my ring roller. It does work, but is overkill for my application. I do wish it had the ability for tighter/smaller radius bends. Not the tools fault though. A marker to show exactly where the bend would start would also be beneficial.
Darwin flores
Reviewed in the United States on April 16, 2024
Most of the plumbing fittings are $$$ now. I use this product to bend some copper pipe 3/4 , not bad using this product for my 1st time ,tip -use some lubricant in order to make bends more smooth. I tried with pex too it's helps a lot if you need to bend some but pex is flexible is not going to keep the shape on a 90 degreeIt works great with hard pipe or copper pipe.
Matt N
Reviewed in the United States on December 17, 2023
For $120, this bender is awesome. I've made a few boat hand rails with it and it works great. It's not for the novice tubing bender, but if you have enough material to make mistakes; that's how you learn. It makes nice and smooth bends, but it does leave a devit where the clamp eye is. If they could re-engineer that clamp eye so it wouldn't leave a devit; this thing would be the biggest bang for the buck. I love it though. For my boat and the boats I work on (working fishing boats) it's perfect. Small dent in the bend doesn't matter. I've used it on 3/8 copper compressor tubing, 7/8 and 1" sst rail tubing for boat gunnels. For the 1" tubing, you'll need a long cheater bar, but the bender holds up. I put a pry bar in it to extend the handle 1.5' and that worked great to bend 1" sst. I'd definately buy it again, but hopefully i don't need to.
Allan Gabston-Howell
Reviewed in the United States on April 9, 2023
Received the bender, and mounted it on a 2 x 6, lag bolted into the studs in the garage.I set-about a project that I had been postponing until this purchase arrived, and found it to be a solution to several different problems which I needed to solve.It is sturdy, and appears to be fit for long term, heavy duty use.NOTE: The photographs of this bender show the bender with the exchangeable radius forms installed upside-down. The square/rectangular protrusion in the casting is the stop which prevents the radius form from rotating. If used with the radius form installed as shown in the photos, you risk breaking a radius form when bending under extreme conditions,Additionally, you may find that you have to use some sand paper to remove the paint from the radius form pivot holes, before they will fit easily on the bender hub. A minute or two, with a piece of rolled-up 320 grit sand paper will do it for you, though--nothing to write home about.All-in-all, this will get quite a bit of use in the future days and months ahead.
Recommended Products
$56.98
$ 25 .99 $25.99